Loading…
Loading…
Tender Value
₹77.1 L
EMD Value
₹1.5 L
Closing Date
11 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECTRICAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Balance sheet for the 4th previous year as para 10.2 of GCC-2022 shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annx.-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year has not been audited/ yet to be prepared.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Definition of similar work: "Satisfactory execution of any electrical work related to HT/LT installation."
43 conditions · 9 needing a document upload
Please furnish documents in support of your claim to fulfil the eligibility criteria as mentioned in tender documents. Each page of copy of documents/ certificates in support of credential, submitted by you shall be self attested/digitally signed by the you or authorized representative of your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating the offer or otherwise available in the offer.
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and technical eligibility criteria have been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works matter), otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firm, if applicable in the instant tender, should submit all valid requisite documents and full fill the stipulations as per clause 18 of IRGCC-2022 (works matter), otherwise their offer will be considered incomplete and shall not be considered.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit your Bank details of the firm /individual/JV/partnership etc. i.e. Name of the Bank along with Bank Branch code, account No., IFSC Code, PAN Number and other necessary & relevant documents.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto five years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj-211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Electrical work in connection with the work of "Pd Deen Dayal Upadhyay Junction - Proposal for 30 bed Running Room & Lobby at DDU (Deen Dayal Upadhyay Junction)". Electrical work in connection with "Pd Deen Dayal Upadhyay Junction Ghaziabad PRYJ DIV: Construction of changing rooms for women force members at 21 RPF posts of Prayagraj division".
ELG-49-2627~NCR
ELG-49-2627
Open
Works - General
6 Months
Prayagraj, Uttar Pradesh
₹0
₹1.5 L
19 Aug 2026
19 Aug 2026
28 Aug 2026
69 items across 1 schedule · ₹77,12,480.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 4 sq. mm+ 1 x 4 sq. mm earth wire. Inspection by- Consignee. | Metre | 4200.00 | 198.12 | 8,32,104 |
| 2 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 6 sq. mm+ 1 x 6 sq. mm earth wire. Inspection by- Consignee. | Metre | 2700.00 | 243.1 | 6,56,370 |
| 3 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 10 sq. mm+ 1 x 10 sq. mm earth wire. Inspection by- Consignee. | Metre | 1800.00 | 545.54 | 9,81,972 |
| 4 | Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable insurface/recessed medium class PVC conduit, along with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Inspection by-Consignee. | Point | 560.00 | 195.25 | 1,09,340 |
| 5 | Supply, Erection, Testing and Commissioning of following Modular Type switch 10 A (1-way) complete in all respect. Inspection by-Consignee. | Numbers | 602.00 | 62.06 | 37,360.12 |
| 6 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 10 A complete in all respect. Inspection by-Consignee. | Numbers | 292.00 | 102.61 | 29,962.12 |
| 7 | Supply, Erection, Testing and Commissioning of following Modular Type switch 20 A (1-way) complete in all respect. Inspection by-Consignee. | Numbers | 122.00 | 126.62 | 15,447.64 |
| 8 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 20 A complete in all respect. Inspection by-Consignee. | Numbers | 122.00 | 146.46 | 17,868.12 |
| 9 | Supply, Erection, Testing and Commissioning of following Modular type step type Electronic Fan Regulator complete in all respect. Inspection by- Consignee. | Numbers | 67.00 | 201.61 | 13,507.87 |
| 10 | Supply and Erection of Fan Box cover POP type complete in all respect including hardware material for fixing. Inspection by-Consignee. | Numbers | 25.00 | 10.26 | 256.5 |
| 11 | Supply and Erection of Junction Box cover POP type complete in all respect including hardware material for fixing. Inspection by-Consignee. | Numbers | 500.00 | 5.07 | 2,535 |
| 12 | Supply and Erection of Modular type switch blanking set to fill the blank space White finished mounting cover plate complete in all respect. Inspection by- Consignee. | Numbers | 108.00 | 7.51 | 811.08 |
| 13 | Supply and Erection of white finish single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by-Consignee. | Numbers | 100.00 | 66.2 | 6,620 |
| 14 | Supply and Erection of white finish single mounting cover plate with base frame suitable 8 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by-Consignee. | Numbers | 85.00 | 139.85 | 11,887.25 |
| 15 | Supply and Erection of white finish single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by-Consignee. | Numbers | 61.00 | 201.91 | 12,316.51 |
| 16 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 3 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by-Consignee. | Numbers | 100.00 | 43.43 | 4,343 |
| 17 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 8 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by-Consignee. | Numbers | 85.00 | 76.14 | 6,471.9 |
| 18 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 12 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by-Consignee. | Numbers | 61.00 | 122.47 | 7,470.67 |
| 19 | Supply and Installation of Ceiling rose 3 plate as per IS No. 371/1999 (Latest Version) including connections, Testing and commissioning as per Tech. Specification. Inspection by-Consignee. | Numbers | 310.00 | 14.44 | 4,476.4 |
| 20 | Termination of LT XLPE cables of various sizes (One Job means all 4 cores of cables). Inspection by- Consignee. | Numbers | 52.00 | 111.69 | 5,807.88 |
| 21 | Supply and laying of B class, 50 mm dia, GI pipe of for cable riser/road crossing as required and as per relevant technical specification. Inspection by- Consignee. | Metre | 150.00 | 115.9 | 17,385 |
| 22 | Collecting, Transporting from SSE/PS/ store to site, laying, testing, and commissioning of above LT cable . Laying direct in ground (Including excavation, sand cushioning, protection brick covering and refilling the trench etc.), direct in RCC/Metal pipes in rod/track crossings and on surface/required in wall/in concrete floor by cutting recessed and finished originally as required as per relevant technical specifications. | Metre | 1900.00 | 61.03 | 1,15,957 |
| 23 | Drilling of bituminous road/track by machines and laying charges of cable in road crossing for laying 110 mm dia HDPE pipe through it. | Metre | 200.00 | 270.57 | 54,114 |
| 24 | Supply and laying of HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: PN 8.0, Nominal Dia (mm): 110) as per relevant IS suitable for HT/LT XLPE cable & as required and as per relevant technical specification. Inspection by- Consignee. | Metre | 200.00 | 243.51 | 48,702 |
| 25 | Supply, installation, testing, connecting and commissioning of LED base name board of different stations (01 set includes 01 No Hindi, 01 No English & 01 No Urdu name board) with power LEDs, Drivers & wiring of board. The signage board should have alphabet of vertical peak height of 600 mm and proportionate horizontal span. Approximate size of Hindi, English signage panel shall have Length6400 mm, Height- 912 mm. Note - 01 set includes a. Hindi board 01 No b. English board 01 No c. Urdu board 01 No. Inspection by- Consignee. | Numbers | 1.00 | 2,41,999.76 | 2,41,999.76 |
| 26 | Supply, replacement, fixing, testing, connecting and commissioning of energy efficient luminaries complete with all accessries of capacity 18/20 watt, 4 feet length, T8 LED lamps with sutable current control driver circuit ,suitable for surface/recessed mounting.LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute light,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, or an LED lamp. (2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012) .Light Source (LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS: 16105(2012). IS:16108(2012), IEC:62471.1.Input operating voltage :-105-295 V AC. 2:-Normal Voltage- 220V AC.3.Driver type: constant current driver with short circuit protection(For tube light). 4.Control of distribution:-Full cut off. 5.Drive component :Industrial grade only .6.Efficiency of driver electronic: > 85% (For tube light).7.Colour temperature:5000-6500K(For tube light). 8.Colour rendering index(CRI):>75(For tube light). 9.Ingress protection :IP-20. 10.Lumen output: >100 lumens/[email protected] drive current(For tube light). 11.Power factor:->0.90(For tube light). 12.Total hormonics distrotion(THD):-<20% (For tube light). 13. Lamp cover :Acrylic cover which does not result in loss of lumens. 14. Finishing:Power coated /Anodized. 15.Secondry optics:poly corbonate reflector/ poly carbonate lens. 16. Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum. 17.Mounting :Suitable for surface mounting/recessed mounting. 18. Certificate: Firm to submit LM80(In respect of LED used) & LM79 (In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC. 19.Warranty:Firm to submit warranty certificate for five year along with the supply.All fittings shall be fitted as surface mounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Materials prameters must remain unchanged during entire warranty period. 1x18/20 watt. Inspection by- Consignee. | Numbers | 270.00 | 308.64 | 83,332.8 |
| 27 | "Provision of Geyser points having MCB 16 A S/P with 3/5 pin 5/15 amps plug points with 1.5 sqmm (22/0.3mm) / 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked in recessed PVC pipe of ISI marked and MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including providing and fixing 3/5 pin 5/15 Amps socket outlets and 5/15 Amps piano type switch and earthing the 3rd pin with 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) Copper earth wire along with pipe duly clamped as required and as per relevant technical specification. ( 15 AMP) ." Inspection by-Consignee. | Numbers | 36.00 | 411.59 | 14,817.24 |
| 28 | Supply, installation, testing & commissioning of 25 ltrs stationary storage type electric water heater (Geyser) having BEE star rating- 5 star 2018 or latest, Installation : vertical, ABS Body, element wattage - 2kW, Tank capacity - 25 ltrs, conforming to IS : 2082/1993 with latest amendment complete and as per site requirement. Inspection by- Consignee. | Numbers | 36.00 | 3,363.89 | 1,21,100.04 |
| 29 | Supply, fixing, testing, connecting and commissioning of storage type water cooler similar to Model SDLX 100, Cooling Capacity-170 litre per hour, 380/400 litre Storage with foundation/platform & cage. Inspection by- Consignee. | Numbers | 9.00 | 52,947.86 | 4,76,530.74 |
| 30 | Exhaust hood stainless steel with stainless steel filter 08 mm thickness standard 202, with installation size 30x24x30 . Inspection by- Consignee. | Foot | 20.00 | 4,783.57 | 95,671.4 |
| 31 | Duct: G.P. sheet G.I. Galvanized IS-277 thickness .06 mm Duct size 24x18 inch with starter panel . Inspection by- Consignee. | Square Foot | 150.00 | 76.87 | 11,530.5 |
| 32 | Exhaust Fan: Axial Fan 440 volts 3 phase 50 hz 2.0 Hp, 1440 RPM Speed, blade size 24". Motor with Starter Panel. Inspection by- Consignee. | Numbers | 2.00 | 29,897.31 | 59,794.62 |
| 33 | Supply, fixing, testing, connecting and commissioning of wall mounted Bracket Fan 400 mm sweep including supply of M.S. fixing clamps & its hardware with flexible copper cable twin twisted size 24/0.20 01 mtr long for each fittings as required. Inspection by- Consignee. | Numbers | 51.00 | 1,438.62 | 73,369.62 |
| 34 | Provision of Sleek Wall Mountable Modular Mobile Charging Kiosk consisting of mobile carrying tray of adequate capacity and 01 switch for each 08 sockets of 2 pin. It has to be attached to any wall or placed on a table. Either white or black finish. Made up of high grade PVC or fiber-glass. Thickness of fiber sheet should not be less than 2 mm. Holding tray should have load bearing capacity of 10 Kg pereight-socket. Mobile holding tray should be very rigid, robust and transparent, scratch-proof fiber-glass material of not less than 10 mm thickness. During warranty-period if any scratch is generated, entire charging station shall have to be replaced. Each socket should be modular (Legrand, Anchor, Arkeylite, HPL, Havells only) 2 Pin type. (mounted vertically). Adequate space should be left for next row of sockets to start so that mobile chargers may be fixed without any space crunch. One bottle type fuse and one LED indicator for each set of 8 sockets and one MCB of adequate capacity for complete board shall have to be provided. One switch foreach set of 8 socket is required. Dimension of holding tray should not be more than 10 inches depth. However, multi-step holding may be provided with successive trays having increasing depth. Depth of entire unit should not be more than 1.5 feet after installation with trays in openposition......8 sockets x 2 row. Inspection by- Consignee. | Numbers | 4.00 | 1,568.4 | 6,273.6 |
| 35 | Supply, erection, testing and commissioning of One phase distribution board comprising of one no. 32/40 amps DP MCB with 40 A ELCB/RCCB as incoming and 4 nos. 10 amps SP MCB , 4 nos. 20 A SP MCB as outgoing complete with copper bus bars, neutral link and other accessories housed in CRCA sheet enclosure with double door type. Inspection by-Consignee. | Numbers | 27.00 | 3,184.95 | 85,993.65 |
| 36 | Supply and instalation of 1-phase 5 KVA, 120/96 Volt DC input UPS as per IS 16242/ IEC-62040 with Battery Bank of 12V, 10 Nos. tubular batteries having each capacity 150 AH for Emergency Supply. Inspection by- Consignee. | Numbers | 3.00 | 1,22,110.8 | 3,66,332.4 |
| 37 | Supply, fixing, testing and commissioning of 250 mm sweep fresh air fan complete. Inspection by- Consignee. | Numbers | 20.00 | 1,041.12 | 20,822.4 |
| 38 | Supply, fixing, testing, connecting and commissioning of 24/36 watt 2x2 LED lights fittings as per IS:10322 , recess LED Fitting 24/36 watt, suitable for surface/ recessed mounting. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute light, to position and protect the light source, and to connect the light source to a branch circuit.The light source it self may be an LED array and LED module, or an LED lamp.(2):- Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106 (2012). Light Source (LED) in the Luminaries should be of make:- (1):- NICHIA/CREE/ OSRAM/ SEOUL /PHILIPS / LUMILEDS /LEDNIUM. (2):-LEDs to IS:16105(2012). IS: 16108(2012), IEC:62471. 1. Input operating voltage :- 105-295 V AC.2:-Normal Voltage-220 VAC. 3. Driver type: constant current driver with short circuit protection. 4.Control of distribution:- Full cut off. 5. Lumens-2880/4320 . 6. Efficiency of driver electronic: > 85%. 7. Colour temperature:4000K. 8.Colour rendering index (CRI):>75. 9. Ingress protection : IP- 20. 10.Lumen output: >=120 lumens/ watt @ Max. 350 mA drive current. 11. Power factor:->0.97. 12. Total harmonics distortion (THD):-<20%. 13.Lamp cover :Acrylic cover whichdoes not result in loss of lumens. 14. Finishing: Power coated/Anodized. 15. Secondry optics: poly carbonate reflector/ poly carbonate lens. 16. Construction of housing: extruded aluminum/ CRCA/Pressure die cast aluminum. 17. Mounting: Suitable for surface mounting/ recessed mounting. 18. Certificate:Firm to submit LM80 (In respect of LED used) & LM79 (In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC. 19. Warranty: Firm to submit warranty certificate for five year along with the supply. All fittings shall be fitted as surface mounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Material parameters must remain unchanged during entire warranty period. Inspection by-Consignee. | Numbers | 80.00 | 1,474.65 | 1,17,972 |
| 39 | "Supply, testing and commissioning of fly catcher of size-63 x 17 x 45 cm3, 2 nos UV lights of 2 feet 18 watt each as per relevant technical specification." Inspection by-Consignee. | Numbers | 4.00 | 2,617.53 | 10,470.12 |
| 40 | Supply, erection, testing and commissioning of single earth electrode of 50 mm. dia 4000mm long GI pipe class B complete with earth box with CI cover hinged to CI frame including connection from earth electrode to MDB/SDB/poles/with 8 swg GI wire/strip as per attached drawing. Inspection by-Consignee. | Numbers | 15.00 | 2,563.18 | 38,447.7 |
| 41 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Inspection by-Consignee. | Numbers | 67.00 | 2,174.81 | 1,45,712.27 |
| 42 | Supply, fixing, connecting and commissioning of Indutrial type Plug & socket SPN distribution board with 02 pole & earth metal Plug & socket complete with 32A S.P. MCB . Inspection by- Consignee. | Numbers | 20.00 | 1,010.06 | 20,201.2 |
| 43 | Supply, fixing, connecting and commissioningof Hot and cold split AC of capacity 1.5 Ton,Nominal Cooling Capacity (KCal/Hr): 6000suitable for 230 volt, AC 1 Phase, Material forbody of indoor unit: ABS, Min. Room DischargeAir flow (Cum/Hr): 700, Guaranteed CooingCapacity (Min) KCal/Hr: 4275 Operation onecofriendly refrigerant R-32 or R-410a, withwall mounting arrangement, confirming toIS:1391 Part-II with latest amendment up todated Star Rating -5. Inspection by-RITES. | Numbers | 20.00 | 46,788.72 | 9,35,774.4 |
| 44 | Supply, fixing, connecting and commissioningof 5 KVA single phase, automatic Voltagecorrector as per IS:8448/1973 and latestamendment up to date ,input voltage(Min)-140 Volt, output voltage -230 Volt +10%with time delay relay. Inspection by-consignee. | Numbers | 20.00 | 6,817.05 | 1,36,341 |
| 45 | Digital Two AC Timer for window/split AC for2.0 TR each (Digital Display LCD model) LCDModel latest intelligent Micro controller basedTechnology (2 AC Timer) program- 1 hr .to 24hrs. with 30 amps Heavy Duty 2 relay outputfor Two AC ,Auto/ Manual Facility, for ThreePhase. HI Wall or Cassete Type or ductabletype AC. Inspection by-Consignee. | Numbers | 10.00 | 4,137.72 | 41,377.2 |
| 46 | Supply, fixing, connecting and commissioning of PVC drain pipe of size 3/4' with split unit.Inspection by- Consignee. | Numbers | 100.00 | 35.73 | 3,573 |
| 47 | Supply ,fixing, testing, connecting and commissioning of 2.5 watt LED wall light lamp, directly on wall and connection with twisted twin flexible cord of minimum size 16/0.2mm copper conductor through flexible pipe as per relevant technical specification. Inspection by- Consignee. | Numbers | 30.00 | 3,921.08 | 1,17,632.4 |
| 48 | Supply, fixing, testing, connecting andcommissioning of 12 Watt or above LEDStraight Shape Led Mirror Picture WallLight- Dressing Table Lights | VanityLights for Mirror | Bathroom Lights forWash Basin.20 Inch Wall Spotlight forPainting,Scenery,For Display Art worklight fitting with die cast aluminiumhousing with toughened glass.LEDLuminaries:-(1) A complete LEDlighting unit consisting of alight sourceand driver together with parts ofdistribute lights,to position and protectthe light source, and to connect thelightsource to a branch circuit.The lightsource itself may be an LEDarray andLED module, or an LED lamp.(2):- Supplied LEDluminaries shall confirm toIS:16101 (2012) IS:16106(2012). LightSource (LED) in the Luminaries shouldbe ofmake:- (1):- NICHIA/CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS/LEDNIUM. (2):- LEDstoIS:16105(2012).IS:16108(2012),IEC:62471.Type LED:-Highpower LED,SMD (Surface Mountingdevice)/COB (Clip on board). 1.Inputoperating voltage :-105-295 V AC. 2:-NormalVoltage-220V AC, 3.Driver type:constant current potted driver withshortcircuit protection. 4. LED life:- >=50000burninghours.5.Depreciation:- 30%max. after 50000burninghours.6.Control of distribution:-Full cut off. 7.Surgeprotection: 4KV. 8.Drive component :Industrial gradeonly.9. Efficiency of driver electronic>; 85%.10. Beamangle:>=140 degree alongwith road and &80> degree acrosstheroad. 11.Colour temperature: 5000-6500K.12. Colourrendering index(CRI):>75. 13. Ingress protection :IP-66. 14. Lumen output: >;=120lumens/watt. 15. Power factor>;=0.95.16. Total harmonics distortion(THD):-<15%. 17. Lampcover :Toughened glassor UV stablised polycarbonate. 18.Finishing:Power coated /Anodized.19.Secondryoptics :poly carbonatereflector/ poly carbonateslens. 20.Construction of housing:extrudedaluminum/CRCA/Pressure diecastaluminum. 21. Mounting: Suitablefor existing pole/Truss/Lanternmounted.22. Certificate:Firm to submit LM 80 (In respect of LEDused) & LM79(In respectof luminaire used) test certificatefromNational/International accreditedLaboratory and OEM certificate forcompliance of BIS/IEC. 23. Warranty:Firm tosubmit warranty certificate forfive year along with the supply.Allfittings should be embossed/sticker withmanufacturing date and warranty detailsat time of supply.24.The weight offixture should be standard for betterheat resistance of LED PCB. All fittingsshall be fitted with new suitablebend/elbow withclamp and proper nutand bolt and connection with twistedtwinflexible cord of minimum size 16/1mm copper conductor as perrelevanttechnical specification. Materialparameters must remain unchangedduring entire warranty period.Aftercompletion of the works all materials tobe deposited to the concern SSEsstores.Inspection by- Consignee. | Numbers | 30.00 | 3,319.05 | 99,571.5 |
| 49 | "Supply, installation, testing and commissioning of Heritage design type cast iron/mild steel pole, grooved, of 4 Meters height with designer bracket 2 sided made of mild steel-cast iron- Cast Aluminium, Cast Aluminium lighting fixture with LED Bulb 36W/40W and EDPM rubber gasket, Cast iron embellishments, stainless steel screw, IP 66, translucent Acrylic diffuser/Poly carbonate diffuser, corrosion and UV ray resistant coating including foundation and related arrangements. Design to be approved by Railways."Inspection by-RITES. | Numbers | 20.00 | 34,459.58 | 6,89,191.6 |
| 50 | Supply and erection with proper foundation Victoriya bollards are decorative cost iron ornamental bollards with medium pumkins. The bollards are painted with black PU paint 18 to 26 watt retrofit LED lamp.Inspection by- Consignee. | Numbers | 20.00 | 3,983.26 | 79,665.2 |
| 51 | Design, Manufacturing, Supply, Erection, testing and commissioning of LT switchgear panel board of 02 mm Tk. Dia pressed CRS steel sheet panel shall be treated for anti corrosion treatment and finished with smoke gray paint as per technicalspecification no. Sr.DEE/G/ALD/Panel-94/113 Comprising with as under:- ........MCCB of 400 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 400 Amp. | Numbers | 1.00 | 14,761.41 | 14,761.41 |
| 52 | MCCB of 125A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole currentrating 125 Amp. | Numbers | 2.00 | 6,423.54 | 12,847.08 |
| 53 | MCCB of 63A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 63 Amp. | Numbers | 5.00 | 3,114.3 | 15,571.5 |
| 54 | Supply of Indicator lamps with suitable holder. | Numbers | 24.00 | 78.87 | 1,892.88 |
| 55 | Supply, fixing, testing, connecting and commissioning of Outgoing/Feeder Panel Mounted Multi-function Mtrs. with Accuracy Class 1 as per IEC 62053-21 or Class 0.5, 0.5S as per IEC 62053-22.LED Mtrs. Cl 1 with RS485: Mtrs. should have following features built-in LED • Flush mounting 96 x 96 mm • True RMS measurement • Password protection provision for security • Site selectable for 3 Phase 4 wire, 3 Phase 3 wire, 1 Phase, CT Secondary 1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input Voltage Measurement 50-500 VAC, 64 samples/ cycle The Mtrs. should be able to read/display following paraMtrs.s Instantaneous ParaMtrs.s (V1, V2, V3, V12, V23, V31, Avg (VLN, VLL), A1, A2, A3, Aavg, F, PF-1, PF-2, PF-3, PF (Avg) W1, W2, W3, W (total) VA1, VA2, VA3, VA (total) Cumulative ParaMtrs.s (Import Wh, Import Vah, Import load hours, Reset (old) Cumulative paraMtrs.s (Import Wh, Import load hours, Communication (RS485 Modus RTU).complete with all accessories. | Numbers | 8.00 | 2,500.87 | 20,006.96 |
| 56 | Fabrication works and insulated Aluminum bus bars of 800A capacity for phases & 800A capacity for neutral Bus bar shall be suitably insulated with heat shrinkable sleeves/ epoxy coating/insulating tap to withstand the test voltage of 2.5 KV Copper strip for connection outgoing as well as incoming with suitable size be provided. LT Panel form item No. 51 to 56 will beInspection by-Consignee. | Numbers | 1.00 | 44,706.74 | 44,706.74 |
| 57 | Supply of heavy duty aluminium stool type folding ladder having "C" shapes section of size 16"x12" on top suitable for height upto 12 feet complete similar to Sumer make design no. AL-201/8818 (heavy duty) or equivalent. Inspection by-Consignee. | Numbers | 2.00 | 10,869.09 | 21,738.18 |
| 58 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up of steel sheet, phosphatised powder painted complete with neutral link,earth point, Din rail and prewired confirming to IS:13032 & 8623:1991 withfollowing items to be fixed in distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (25, 40 Amps., three nos. each) 10 kA 'C' series = 06 Nos.(Outgoing). Inspection by-Consignee. | Numbers | 2.00 | 25,425.66 | 50,851.32 |
| 59 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up of steel sheet, phosphatised powder painted complete with neutral link,earth point, Din rail and prewired confirming to IS:13032 & 8623:1991 with following items to be fixed in distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (40 & 63 Amps., two nos. each) 10 kA 'C' series = 04 Nos.(Outgoing). Inspection by-Consignee. | Numbers | 2.00 | 20,340.53 | 40,681.06 |
| 60 | Supply erection, testing & commissioning of basic Earthing Kit 1set as per RDSO spec. No RDSO/PE/SPEC /PS/0109(REV.0)-2008, Amendment '1' or latest specification. Inspection by-Consignee. | Numbers | 10.00 | 12,665.01 | 1,26,650.1 |
| 61 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 4Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers | 5.00 | 329.86 | 1,649.3 |
| 62 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 6Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers | 5.00 | 498.08 | 2,490.4 |
| 63 | Supply, fixing, testing and commissioning of DP RCBO's 10 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 20.00 | 2,520.12 | 50,402.4 |
| 64 | Supply, fixing, testing and commissioning of DP RCBO's 16 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 20.00 | 2,520.12 | 50,402.4 |
| 65 | Supply, fixing, testing and commissioning of DP RCBO's 20 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 15.00 | 2,520.12 | 37,801.8 |
| 66 | Supply, fixing, testing and commissioning of DP RCBO's 25 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 15.00 | 2,520.12 | 37,801.8 |
| 67 | Supply & Erection of LT XLPE Straight through Joint 1.1 kV 3.5/4x70-150 Sqmm. Inspection by-Consignee. | Numbers | 5.00 | 2,694.31 | 13,471.55 |
| 68 | Supply & Erection of LT XLPE Straight through Joint 1.1 kV 3.5/4x185-240 Sqmm. Inspection by-Consignee. | Numbers | 6.00 | 4,445.4 | 26,672.4 |
| 69 | Supply, erection, testing and commissioning of single earth electrode of 50 mm. dia 3000 mm long GI pipe class B conforming to IS: 1239 latest complete with earth box with cover as per RDSO approved drawing including connection from earth electrode to MDB/SDB/poles/with 8 swg GI wire . Inspection by- Consignee. | Numbers | 21.00 | 2,642.7 | 55,496.7 |
| Schedule total | ₹77,12,480.4 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument_1.pdf
ATTACHMENT
GCCACS2022CORRECTION.pdf
ATTACHMENT
2026_03_13AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
Quantitybifurcation.pdf
ATTACHMENT
Likelysourceofsupply.pdf
ATTACHMENT
GCC_April-2022_2022__27_04_227.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnxVIB.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_21.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-31.pdf
ATTACHMENT
2023_08_07RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4_1.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-5_1.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-6_1.pdf
ATTACHMENT
ACS_7to10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].