Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.4 L
EMD Value
₹8,500
Closing Date
27 Oct 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Rural Development and Panchayat Raj Department
supreetha
Contruction of Toilet Block in GHPS Vanivilasa in Hassan Taluk
RDPR/2026-27/BD/WORK_INDENT29860
RDPR/2026-27/BD/WORK_INDENT29860
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Hassan
4 documents required · 3 mandatory · 1 optional
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
SIMILAR NATURE OF WORK DONE CERTIFICATE ISSUED BY NOT BELOW THE RANK OF EXECUTIVE ENGINEER
THE TENDERER SHOULD SUBMIT THE KPWD REGISTRATION CERTIFICATE (SHOULD BE ENROLLED AND RENEWED IN KPWD AS CLASS 4 & ABOVE CONTRACTOR)
The tenderer must have achieved in at least two financial years in the last five financial years 2021-22 to 2025-26. TURNOVER CERTIFICATE CERTIFIED BY CA With UDIN NUMBER.
Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this tender A.Existing commitments and on-going works. B.Works for which Tenders already submitted.
₹500
₹8,500
13 Oct 2026
13 Oct 2026
28 Oct 2026
23 Oct 2026
Contruction of Toilet Block in GHPS Vanivilasa in Hassan Taluk
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works Sub structure works of bridges, Drain works other parallel works from 0.50m to 3.50 m height. The ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height. The granite/trap...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 20 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied 1.67L/10 m² over and including priming coat of exterior primer applied 2.20 kg/10 m²) with paint of...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTw coats on new work over an under coat of suitable shade with ordinary paint of approved...
Providing and installing at site of work P.V.C. pipes including cost of
pipes and specials and labour, including lowering into trenches, laying
true to line, level and perfect linking at joints leak p...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G....
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 ) total coated thickness, Zinc coating 120 g/m2 as per
IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prime...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the w...
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Supply and fixing of SFRC machinhole cover (Medium Duty) made as per S to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with al...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot cold water supply, including all CPVC plain brass threaded fittings, i/c fixing the pipe with clamp...
Providing and fixing PTMT bib cock of approved quality and colour.
13.17.1 15mm nominal bore, 86 mm long, weighing not less than 88 g
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Notification 15.pdf
Others - NOTIFICATION • 0.43 MB
KW-1.pdf
Tender Document • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .