Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.3 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LI BIDDER | |
| 2 | L2₹50.3 L+₹86,863 (1.76%)Rejected-Finance | L2 | Rejected-Finance ACCEPTED BEING OTHER THAN L1 BIDDER | |
| 3 | L3₹50.4 L+₹1.0 L (2.06%)Rejected-Finance C O SIMPLICITY LYNGDOH LOWER LUMPARING LABAN SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L3 | Rejected-Finance ACCEPTED BEING OTHER THAN L1 BIDDER | |
| 4 | L4₹51.9 L+₹2.5 L (5.08%)Rejected-Finance NO 29 CANTONMENT NEAR ANJALI CINEMA HALL SHILLONG 793001 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793001 | L4 | Rejected-Finance ACCEPTED BEING OTHER THAN L1 BIDDER | |
| 5 | L5₹52.7 L+₹3.3 L (6.65%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L5 | Rejected-Finance ACCEPTED BEING OTHER THAN L1 BIDDER |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG
PROVN OF GUARD ROOM NEAR MT OF 101 AREA PRO UNIT AND SPL REPAIR TO DS 07 (PERS LINE) AT LOWER BLOCK OF MH SHILLONG UNDER GE SHILLONG
2024_MES_654623_2
GE/SHL/TOKEN-05 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE SHILLONG
₹93,000
19 Sept 2024
6 Jul 2024
4 Sept 2024
6 Jul 2024
3 Sept 2024
13 Jul 2024
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Demolition of brick work or solid concrete block masonary or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified
Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
M&L for pre construction anti termite treatment by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed
M&L for pre construction anti termite treatment by treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and as directed.
Removing of surplus exacavated material (soil) to distance n.exc. 50m and disposing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soil complete all as specified and directed.
Removing of surplus exacavated material (soil) to distance exc 500m but n.exc. 1.5 Km and disposing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soil complete all as specified and directed.
M&L for earth filling under floor including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil complete all as specified and as directed.
M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed.
M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.
M&L for RCC M20 (Nominal mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M20 (Nominal mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts etc. complete all as specified and directed.
M&L for RCC M20 (Nominal mix) using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal, rough finished surface of concrete complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surface of concrete complete all as specified and directed.
M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto all as per Sl item No. 20 here-in-above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for precast cement concrete block masonary with solid blocks, exc 10cm in width or girth, made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate, and set in cement mortar (1:6) complete all as specified and directed.
M&L for precast cement concrete solid building blocks or slabs n exc10cm thick (with plain or interlocking joints as directed made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate complete in walls and set in CM 1:4 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete as specified and directed.
M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed.
M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc. complete all as specified and as directed.
M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection layed in bays n exc 2m, finished even and smooth without using extra cement complete as specified and directed.
M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base finished even and rough complete as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in hardstanding, path, finishing even and fair complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in sub base finishing even and fair to receive floor finishes complete all as specified and directed.
M&L for rolled mild steel work in framed work as in doors or gates, tank staging of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
M&L for rolled mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.quality conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
M&L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed.
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment attachment, quality conforming to Fe-410-W (Gde-E-250), quality-A complete all as specified and directed.
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment, quality conforming to Fe-410-W (Gde-E-250), quality-A complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed..
S&F 20 mm thick 2nd class hard wood boarding as in eaves board/fascia, planed one side with butt joints and fixed with nails complete all as specified and directed.
M&L for second class hard wood in scantlings,wrought, unframed and fixed complete all as specified and directed.
Fixing only 2nd class hard wood in scantling, wrought, timber framed and fixed complete all as specified and directed. (NOTE: Serviceable timber scantling obtained from dismantling under Srl item No. 38 here-in-above shall be reused under this item)
Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5Sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm but n exc 4 sqm each complete all as specified and directed.
Taking down shutters of any description n.exc 1.0 sqm each complete all as directed
Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed
Taking down shutters of any description n exc.1.0 Sqm each and refixing in the same opening complete all as directed.
Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each and refixing in the same opening complete all as directed.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F 100mm stainless steel butt hinges with mild steel hinge pin complete all as specified and directed.
S&F 150 mm aluminium anodised barrel bolts and fixed complete all as specified and directed.
S&F 150mm extruded aluminium, anodised, handles complete all as specified and directed.
S&F 100mm extruded aluminium, anodised, handles complete all as specified and directed.
S&F 200mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F 4.8mm thick frosted sheet glass, ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 4.8mm thick sheet glass, ordinary quality and glazing with fixed in alumnium frame/ oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness. Aluminium frame work will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed .
M&L for 4mm E-board, 600x600 mm, prepainted fibre board, designer/decorative type with design as approved, fixed or laid/inserted in aluminium frame work in ceiling, flat or sloping, complete all as per manufacturer instruction and as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for light shade double charged vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 Sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for dark shade vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0..36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
M&L for 20mm thick granite slab, rubbed and polished as for fixing WHB including cutting to shape as required, grinding, polishing, rounding edges, laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Labour only for chamfer, splays or arris in facework of Granite not exc 15mm wide complete all as specified and directed.
Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on one side of lathing, finished even and smooth without using extra cement complete all as specified and as directed.
M&L 15 mm thick rendering in CM 1:6 on other side of lathing, finished even and smooth without using extra cement complete all as specified and as directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.
M&L 15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after.
Supply on integral water proofing compound.
M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.
M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surface or previously untreated surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .
M&L for preparation of new plastered surface or previously untreated surface and applying two or more coats (over 1 mm thick wall care putty ) of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .
M&L for complete removal of existing treatment of wall and applying two or more coats (over 1 mm thick wall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .
M&L for complete removal existing treatment of wall and applying two coats of Oil Bound Distemper of approved shade/tint over 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation of new/undecorated surface of wall and applying two finishing coat of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of new/undecorated surface of wall and applying two finishing coat of oil bound distemper over a coat of primer and 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. complete all as specified and directed.
S&F 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F 15mm dia angular stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
S&F in repairs Vitreous China Wash Hand Basin of size 550 x 400 mm, white with pedestal including cutting or pinning in ends of brackets or erecting stand, waste coupling and 32 mm dia waste pipe complete all as specified .
S&F Vitreous China Wash Hand Basin of size 550 x 450 mm, white, fixed on granite slab including waste coupling and 32 mm dia waste pipe complete all as specified and directed.
S&F in repairs Vitreous China EWC with P or S Trap, white, including seat cover, closed pattern with flat bottom and cover, MS CP hinging device, PVC flush bend pipe, PVC Flushing cistern 10 Ltr capacity, low level valve less , syphonic action type, White with inlet ball valve, float and handle, 32 mm dia PVC flush pipe complete as specified and as directed.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding complete all as specified and directed.
S&F vitreous china urinal, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F in repairs vitreous china urinal, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F 125mm size chromium plated shower roses with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F corner glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed.
S&F in repairs 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm bore brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs single lever basin mixer fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses complete all as specified and directed. ( Model No. Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Hindware/Parryware).
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S&F 20mm dia harrison rails (curtain rails), aluminium anodised alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.
S&F brackets, aluminium anodised, for 20mm dia curtain rails complete all as specified and directed.
S&F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs CP Hand shower 27x27 mm square shape single flow with air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5 m long with nuts complete all as specified and directed. ( Model No. Jaquar Cat Part No: HSH-35537 & SHA-571 or equivalent in Marc/Hindware/Parryware).
S&F in repairs CP single Lever Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) complete all as specified and directed. (Model No. Jaquar Cat Part No:- OPP-15125PM or equivalent in Marc/Hindware/Parryware).
S&F in repairs CP over head shower square shape of size 150x150mm with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange complete all as specified and directed. ( Model No. Jaquar Cat Part No: OHS-CHR-1619 & Jaquar Cat part No: SHA-455L400 or equivalent in Marc/Hindware/Parryware).
S&F in repairs soap dish holder complete all as specified and directed. ( Model No. Jaquar Cat Part No:- AKP-35731P or equivalent in Marc/Hindware/Parryware).
S&F in repairs toilet roll holder stainless steel with flap complete all as specified and directed. (Model No. Jaquar Cat Part No:- AKP-35753PS or equivalent in Marc/Hindware/Parryware).
S&F in repairs towel ring square shape stainless steel complete all as specified and directed. (Model No. Jaquar Cat Part No:- AKP-35721P or equivalent in Marc/Hindware/Parryware).
S&F in repairs towel rack 600mm long with lower hangers , stainless steel complete all as specified and directed. (Model No. Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag/Hindware)
S&F in repairs corner glass shelf with bracket complete all as specified and directed. (Model No. Jaquar Cat Part No:- ACN-1173 or equivalent in Marc/Parryware/Prayag
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F for PVC (SWR) pipes (half round of 150 mm with rounded edges) as in eaves gutters including fixing asscessories such as clip/cleats/rubber ring joints in regular interval of 2 mtr, single socketed complete all as specified and directed.
S&F 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall/floor complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends, any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F Stack clamps made out of MS flat iron 50mx5mm and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in position and fixed in complete all as specified and directed.
M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 for 110mm dia pipes complete all as specified and directed.
M&L for construction of RCC septic tank of 20 users capacity including necessary excavation, earth work, brick work, concrete work, plastering, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as specified and shown in typical drg No.CESZ/2019/STD-1.
M&L for construction of soak well 1.8 mtr dia and 3 mtr effiective depth with including necessary excavation, earth work, brick work, plastering, filling with brick bats, PCC on top, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as specified and shown in typical drg No.78.
Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed..
M&L for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
Ditto all as per item No.151 here-in-above but for one 2/3 pin, 5 Amp socket outlet on independent board complete all as specified and directed.
M&L for point wiring for one power point socket outlet, 15A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
M&L for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including 20mm dia non metallic PVC conduit, concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
Ditto all as per item No.154 here-in-above but for one 5 Amp socket on same board with other switches complete all as specified and directed.
Ditto all as per item No.154 here-in-above but for one 5 Amp socket outlet point on independent board complete all as specified and directed.
M&L for point wiring for one power point socket outlet, 15A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area, 1100V grade, drawn in and including 20mm dia non metallic PVC conduit, concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
S&F modular switch 1 way, 1 module, 6A, 230~250 volt , AC supply, ISI Marked with modular cover plate and frame complete all as specified and directed.
S&F modular socket, 6A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked with modular cover plate and frame complete all as specified and directed.
S&F modular socket, 6A/16A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked with modular cover plate and frame complete all as specified and directed.
S&F modular switch 1 way, 1 module, 16A, 230~250 volt , AC supply, ISI Marked with modular cover plate and frame complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm, three terminals suitable for 230 Volts AC, 6 Amps complete all as specified and directed.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and fixec to wall/ceiling with 02 Nos PVC block of suitable size complete all as specified and directed.
S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220V AC, decorative type with driver holder and LED lamp including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.
S&F LED Lamp, 7 watt, B22, base colour, temp 6500K complete all as specified and directed
S&F LED building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed..
S&F Exhaust fan, 250mm, 230 volts, plastic body including making all necessary electric connection including cutting hole of required size on wall, fixing on & including wooden frame and making good disturbed surface of wall complete all as specified and as directed.
S&F Exhaust fan, 300mm, 230 volts, plastic body including making all necessary electric connection including cutting hole of required size on wall, fixing on & including wooden frame and making good disturbed surface of wall complete all as specified and as directed.
S&F electric water heater, storage type, steel body, vertical type with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and fixed to wall duly grouted into wall including necessary cement work, making good disturbed surface of wall and making necessary electrical and water connection and testing after installation complete all as specified and directed.
S&F 15mm dia PVC connection pipe, heat resistant for hot and cold water, 450mm long complete all as specified and directed.
S&F 15mm bore GI tubing, medium grade with all fitting and fixed, laid in trenches, fixed to wall/ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixed, laid in trenches, fixed to wall/ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 90gms).
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB , 20 Amps, 'C' series, 10KA, 240V complete all as specified and directed
S&F in repairs MCB Distribution board, single pole and neutral, 12 ways, 240V double door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, fixed on wall duly grouted or on wooden board with all necessary electrical connections complete all as specified and directed.
S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity, 'C' series complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 'C' series, 10KA, 240V and to be housed in DBs including necessary connection complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 6.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).
M&L for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).
Supply, laying & testing of LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade and cross-sectional area 16 Sqmm 2 Core complete all as specified and as directed.
Excavation in trenches not exc 1.5m wide and not exc 1.50 in depth for laying of underground cables/pipes etc. and getting out in soft/loose soil complete all as specified and directed.
Supply and laying dry river sand filling for cable protection with a layer of 8cm deep before laying cable and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note: Punned thickness shall be measured).
M&L for sub class 'B' bricks locally available best quality and laid dry, width wise across the line of cable in trenches for protection of underground cable complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.
Removing excavated soils to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.complete all as specified and as directed.
M/S U.K ENTERPRISE (BID ID -3067247)
Lyngdohs Construction Company And Associates (BID ID -3067647)
M/S Surendra Prasad and Associates (BID ID -3066999)
S K Construction (BID ID -3067217)
M/S INSHA ELECTRICALS (BID ID -3066798)
M/s A L Traders (BID ID -3066631)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .