Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.0 LAccepted-AOC | 1 | Accepted-AOC Lowest | |
| 2 | 2₹15.1 L+₹16,485 (1.10%)Rejected-AOC | 2 | Rejected-AOC 2nd Lowest | |
| 3 | 3₹17.4 L+₹2.4 L (16.2%)Rejected-AOC MOH JAMALPUR NARNAUL DISTT MAHENDERGARH | 3 | Rejected-AOC 3rd Lowest | |
| 4 | 4₹17.4 L+₹2.5 L (16.4%)Rejected-AOC | 4 | Rejected-AOC 4th Lowest |
Tender Value
Refer Docs
EMD Value
₹25,440
Closing Date
20 Jul 2021, 1:00 pmClosed
Executive Engineer
EE PHE GWI Division Rewari
Drilling of 3 Nos Tubewells and Providing fixing of 3 Nos pumping machinery by Pvt R R Rig Method in village Gulawad Palwal
2021_HRY_179484_1
SE/GWI/2617/Gulawad
Open Limited
Miscellaneous
Works
45 days
Gulawad Palwal
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹25,440
Yes
28 Sept 2021
13 Jul 2021
20 Jul 2021
13 Jul 2021
20 Jul 2021
13 Jul 2021
Amount
Drilling of 609.60 mm dia bore by Reverse rotary drilling (Reverse Ciculation method) according to ISI specification No.2800-1991 (Part-1) as amended upto date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and boulders upto 125mm dia except rocky strata including the cost of all consumable stores, fuel oils, soil, stabilizing material and transportation of rig and other accessories to the site of proposed bore and back, complete to the satisfaction of the Engineer-in-Charge with Contractor Pvt. Rig.Machine 3x60=180
Providing fixing of 200mm i/d 6.4 mm thick plain ended Electric Resistance Welded (ERW) M.S. Pipes as per IS marked 4270:2001 BIS 2001 (Length of pipe 4 to 7 mtr.) 3x45=135
Providing Fixing for lowering 200mm i/d all welded S.S Screen conforming to ISI 8110-2000, and thickness 8mm, slot opening 0.75mm/0.50mm 3x15=45
Providing & fixing of M.S. bail plug end cap.
Providing & fixing of Center Guides. (i) 200mm ø (3x 3 = 9 Nos.)
Providing & fixingof M.S. cap 200mm ø.
Supplying & packing of Pea Gravel (A-Grade) for use as pack in tubewells size of over 2.00mm to 3.35mm with uniformity coefficient Not to exceed 2.00 . The Gravel should be confirming To requirement of ISI, 4097-1967 regarding its physical Characteristic quarry at Panchkula/Chandi Mandir. 3x20=60
Provision for resistivity servy of the area
Providing & Fixing 8" MS Clamp for supporting 219.10 mm housing pipe with sutable giders complete in all respect.
Providing & Fixing of safety MS Grider for tubewell
Development of tubewell with Air Compressor having capacity 250 PSI 450 CFM according to clause 9.3 of IS: 2800 - 1991 (Part-I) as amended upto date and specifications attached and as directed by the Engineer-in-Charge of the work including the cost of all consumable stores, fuel, oil, compressors and machinery etc. as required for this work. Developed by Air Compressor of 250 PSI 450 CFM. (3 x 10 = 30 Hrs.)
Providing and testing Electric logging of Tubewell
Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 .400 LPM /60M Head 10.00 BHP Each Make , KSB , Texmo, CRI, Kirloskar
Supplying erection, testing of fully automatic Electric Control Panel Board for tubewells in pump chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of Angle Frame containing 1 No. fully automatic air brake starter suitable for 25 HP motor, Main switch of suitable range with HRC fuse, 1 No. Volt Meter (0 to 500 Volts), 1 No. Amp. Meter of 0 to 100 Amp. 3 Sets of indicating lamp Capacitor of suitable capacity and 1 No. single phase preventers with the timers switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No.II. (Make L&T, BCH, , Havells).
Prov. and fixng M.S. Clamp
Supplying and fixing following C.I.D/F pipe, CI Specials, sluice valves with wheel, non return valves with G.M. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of masonry/concrete/ steel for delivery pipe from Submersible Pump Set upto 1.5 mtr. outside the outer wall of pump chamber as per plan shown as per specification given in schedule No II A)Detail of pipes and specials. Supplying & fixing CI Specials a)CI D/F bends, reducers, tapers, tees, tail piece, blank flange etc. upto 200mm i/d.3x70=210
Providing, and fixing D plate/Bore cap of size 300mm. with nut & bolt complete.
Providing, and fixing G.I Pipe 2" B Class (Delivery Pipe )3x5=15
Providing and fixing service cable 25 sqmm 4 core aluminum 3x70=210
Bidder Name
Amount
MUJAHID HUSSAIN GOCT CONTRACTOR(GSTN-06ADMPH6482J2Z4)
The Krinki Kherli Co.OP L and C Society(GSTN-06AABAT4631N1ZA)
Moti Ram(GSTN-06AGUPR7617Q1Z8)
Shyam Sunder Contractor(GSTN-NA)
Moti Ram
MUJAHID HUSSAIN GOCT CONTRACTOR
Shyam Sunder Contractor
The Krinki Kherli Co.OP L and C Society
Moti Ram
MUJAHID HUSSAIN GOCT CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .