E-Tender No. 19/2025-26, EUDC-II, Noida

Amount

CONSTRUCTION OF NEW LINE FOR RELEASING OF NEW CONNECTION IN THE ARES SDO - 1 UNDER EDD DADRI

Carriage of Distribution box(Single Phase/Three Phase) from Store Center Sahibabad to work site including safe loading and unloading at both ends and Installation of Distribution Box with Clamp and Nut, Bolts and Washer. (Distribution Box will be provided by the deptt. and Clamp, Nut, Bolts and Washer in the scope of Contractor.)

Carriage of New 8.5mt./9mtr/11Mtr. Long PCC pole from Any Store of PVVNL Discom/Central Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends.

Carriage of New 9Mtr, 11mtr, 13mtr. Long STP from Any Store of PVVNL Discom/Central Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends.

Carriage and Fixing of line accessories, Double pole accessories on pole i.e. Cross arm, M.S channel, Angle, V Disc Insulator with fitting, Pin Insulator with pin, Dropper channel, Stay Set, Earthing Complete, Fuse Set, T-off Channel, T/F Base Angle etc. (any other items mentioned in Estimate issued from Store) as required for complete the work.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all Nut bolt & washer and other accessories . for Single Pole as following :

Single support on ST Pole 9/11/13Mtr. Long

Single support on PCC Pole 8.5/9/11Mtr. Long

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer and other accessories. Double Pole Structures of PCC Pole and ST Pole .

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. The work are as Follows :

S.T pole 11/13Mtr. Long

8.5/9/11 Mtr PCC Poles.

Fixing of Stay set complete (G.I.Stay rod 16x1800mm, Stay wire 5Kg, Guy insulator, G.I.Stay clamp, bolt, nut & wasther) for LT/11KV/33KV line with Fixing, tightening & nozzling of stay wire with fixing of Stay Insulators of 11KV and Stay Clamps with Grouting of stay rods including all work of excavation, cement concrete Including back filling of soil and proper ramming etc.

Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing.

Cartage and Laying lifting, stringing & proper sagging of 4/5 phases ACSR conductor (LT/HT) in accordance with Line chart includidng binding and fixing of all accessories in Conductor in parallel as per site requirement for New conductor on H.T/L.T line for New Connection to Consumer with binding, jumpering etc.including complete connections in all respect, from any Store Centre of PVVNL to work site including safe loading and unloading at both ends.

ACSR Dog Conductor.

ACSR Weasel Conductor.

ACSR Rabbit Conductor.

Carriage of new LT ABC cable 50/70/ 95/120 Sqmm from Store Centre, Sahibabad to work site including safe loading and unloading at both ends with laying, lifting of sagging of ABC cable and fixing of all types clamps & connection with complete work in all respect.

size 50/70 sqmm

size 95/120 sqmm

Guarding of LT AND HT Line by G.I. Wire as per RESPO. (All work and material in contractor scope.)

Guarding of Pole for safety upto 7feet by Barbed wire as per RESPO. (All work and material in contractor scope.)

Carriage of 3x50/70/120/185/220/385/300 sqmm of LT/11KV/33 KV XLPE cable from any Store Center sector 20,Noida/J.E Store/Ghaziabad/Any Store of PVVNL Discom to work site, loading & unloading both side with Laying, Looping, sagging and comissioning of XLPE Cable in Double Ckt./SINGLE CKT. by manual method in two parallel bores for Double Curcuit/Single circuiit by manual method at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level for laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and Providing & Laying of Ist Class Bricks, along the length on both side of XLPE Cable in Cable Trench (minium 18No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm on top of the each Cable, Providing 150 thickness mm River sand for cushion beneath and 150mm above the cable and Back filling of excavated earth in the cable trench upto the ground level and ramming properly with making of double pole riser and complete work in all respect.

Carriage of 3x50/70/120/185/220/385/300 sqmm of LT/11KV/33 KV XLPE cable from any Store Center sector 20,Noida/J.E Store/Ghaziabad/Any Store of PVVNL Discom to work site, loading & unloading both side with Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road and Laying and comissioning of LT/11KV/33KV XLPE Double Ckt./SINGLE CKT. by Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with Providing of HDPE Pipe (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.) as per site requirement and Laying of HDPE Pipe dia by HDD trenchless method for XLPE cable as per site requirement. Laying and commissiong of XLPE Cable Double Ckt. in HDPE Pipe dia after digging HDD trenchless method boring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work. as per site requirement.

Preparation of 11/33/LT KV Power Cable ends: Making of 11/33KV/LT KV XLPE Heat shrinkable outdoor/Indoor jointing kits/Straight Through suitable for different HT/LT XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. (KITS SHALL BE PROVIDED BY THE DEPTT. AND WORK IN THE SCOPE OF CONTRACTOR)

Carriage & Installation and Commissioning of 11/0.4 KV, 25/63/100/250/400/630/100 KVA Distribution T/F on Plinth/Double Pole/as per site requirement and providing & fixing of Lugs and making of L.T.and HT Connections with complete work in all respects.

Construction of New Plinth of Distribution Transformers as per RESPO with complete work in all respects.

Construction of New Fencing of Distribution Transformers as per RESPO with complete work in all respects.

Chemical Earthing of above newly installed Distribution Transformer.

Carriage and Installtion of Metering System and CT/PT with Cubicle/BREAKER/VCB form Store Noida/Ghaziabad/BSR/Any Store of PVVNL Discom to Site including loading and unloading both sides with mounting on double pole/Meter Room or Plith and making all the connections complete in all respect.

Supply, Fixing, Painting and Errection of the Following material by the Contractor on his own cost.

Different Types of MS Nut & Bolts as per site requirement.

Number Plate

Danger Board

Red Oxide Paint & Aluminium Paint

Suspension Clamp

Piercing Clamp

F-Brackets

F Clamp

Holding Clamp

J Hook for Suspension

Re-Straightening of Tilted ST/PCC Pole after digging of Pit at Kaccha/Pakka Road of suitable size adjustment of PCC/ST Poles with proper grouting as per norms and complete work in all respect.

Repairing of broken/badly damaged/Rusted/Coroded S.T Poles (damaged at ground level) in existing H.T/L.T lines due to extra ordinary rusting & scaling. From bottom side welding of 4/5 pieces( approx 75 cm. long) of angle iron of size 50x50x6 mm. Ist of all digging of pit around the pole of size 1.0 mtr. x 1.0 mtr. x 1.0 mtr. is to be done and then cleaning of rust & de-scaling with the help of hard wire brush & chisel and then MS angle iron of size 50x50x6 mm in 4/5 pcs. of required length as per site requirement varying from 70 cms to 75 cm to cut down and then to be welded with the healthy top and bottom portion of the pole with Ist class electric welding with own welding generator set in such as way that on top of bottom potion over-lapping of healthy part is covered 200 mm length approx. before welding the poles where top & bottom portion are separated, the same are to be kept in alignment safely & after completing the above work, the pit should be refilled. Concreting of S.T Pole for grouting (0.285 cu mt.) cement, stone blast) Making plinth of above repaired ST pole in round shape of height 0.30 meters from ground level having outer dia of 500 mm size in CC 1:3:6 in cement, sand , Stone ballast etc. and completer the work in all respect as per RESPO.

Tigtening & Re-winding of jumpering by ACSR Conductor as per site requirement with complete work in all respect.

M/S YASH TRADERS HAPUR (BID ID -5511437)