NIT No. 05 (24-25) Item No. 3

Dismantling of old existing 600 mm diameter sluice valve from the pump set by cutting of old rusted nut bolts with the help of gas cutter and operating the dismantling joint with the help of tools & tackles, heavy manual labour and shifting the same at safe place with the help of proper logistics as per site requirement.

Removing/ Isolation of the delivery line of the pump set by using a blank flange of 350 mm diameter and 600 mm diameter to control the leakage inside the pump house for safe working.

Supply of Nut, Bolts and washer as required size of good quality.

Supply of Neoprene rubber sheet 50% Neoprene. Make: - Jyoti/ Any DJB Approved make. DJB SOR Item Code: 22.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size). DSR (Civil) 2021 Item No. 4.1.5

Fixing of new 600 mm dia. sluice valve with the help of manual heavy labour tools & tackles, T&P etc. by tightening of nut, bolts & washer of taper, sluice valve. Note: Sluice valve of 600 mm diameter and PN 1.0 will be provided by the department.

Painting charges of complete 600 mm diameter Sluice valve

Testing & commissioning of sluice valve on load.

Providing of Industrial Tool kit of STMT98109-1 Maintenance Case with Metal Hinges and Elastic Pockets, 142 Piece. Brand: Stanley, Material: Wood, Metal, Product Dimensions: 47.5L x 37.5W x 17.5H, Centimeters, Maximum Weight: 11 Kilograms, Number of Compartments- 6 Kg. COMPLETE AND VERSATILE WORKSTATION: 4 accessible sections grouping together the essential tools; LEVEL 1: 1x Water pump pliers 250mm-1x Diagonal cutting pliers 150mm-1x Long 1/2 round nose pliers 150mm-1x Universal pliers 150mm-1x Cutter-1x Adjustable wrench 250mm-1x 6-compartment box. LEVEL 2: 1x Bi-material magnetic torpedo level 25cm -1x Measure 5m X 19mm bi-material Tylon -8x Screwdriver: bit holder- PH1-PH2 - PZ1-PZ2 - Mechanic 6.5x150-5.5x100- 3x75 -1x tester screwdriver-9x male keys (1.5-2-2.5-3-4-5-6-8-10). LEVEL 3: 1x hacksaw - 1x penlight (batteries not included) - 1x cutter 18mm - 1x wooden handle hammer 300g. LEVEL 4: 1x 72-tooth 1/4'' ratchet -10x 1/4'' sockets (6-point): 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm-2x Extensions 1/4'': 75 mm - 150 mm -1x Bit holder 1/4''-1x Universal joint 1/4'' -1x Ratchet 72 teeth 1/2'' -16x Sockets 1/2'' (6 sides): 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27 - 30 - 32 mm-2x 1/2'' extensions: 75 mm - 250 mm - 1x 1/2'' universal joint -3x 1/2'' spark plug sockets: 16 - 19 - 21 mm -12x Combination wrenches: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm-1x 1/4" 25mm screwdriver bit set - 61pcs in preformed foam. Make: - Stanley/ Taparia/ Bosch/ Any DJB approved make. Above item required for day-to-day minor maintenance of BPS

Providing/Fixing of pressure gauge of 150 mm dia. having required range with accessories such as GI fittings, Bib cock etc. required to complete the work in all respects at all pump sets delivery. Make: - Hguru/ Fibeg/Any DJB Approved make

M/s S.G. Enterprises

Raj Engineering Co.

Bansal Engineers and Traders

paramount systems

TUSHAR ENTERPRISES