Provision of training shed in the area of AGE B/R II under GE (N) Ahmednagar

Amount

Surface dressing n exc 15 cm deep in soft / loose soil etc complete all as specified and directed by Engineer-in-Charge

Excavation in trences n.exc 1.5m wide and n.exc 1.5m depth as in foundation in hard/dense soil and getting out etc complete all as specified and directed by Engineer-in-Charge

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil etc complete all as specified and directed by Engineer-in-Charge

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation /mass concrete etc complete all as specified and directed by Engineer-in-Charge

Rough finished form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed by Engineer-in-Charge

Rough finished form work to sides of pillars, posts, struts, piers, columns and Stanchions etc complete all as specified and directed by Engineer-in-Charge

Rough finished formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge

Rough finished formwork to chullah hoods, cha- jjas, troughs and similar items including edges etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC M-20 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC design mix M-20 using graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC design mix M-20 using graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC design mix M-20 using graded stone aggregate as chajjas etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 14 (here-in-before) but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engineer-in-Charge

Returning, filling including spreading levelling, watering and well ramming in layers in layers n.exc 25cm in soft /disintegrated rock etc complete all as specified and directed by Engineer-in-Charge

Removing excavated (soil) material n.exc 50m and depositing where directed at a level n. exc 1.5m above the starting point etc complete all as specified and directed by Engineer-in-Charge

M&L for hardcore of broken stone or boulders n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm thick P.C.C (1:4:8) type D-2 using graded stone aggregate, in sub base for floor etc complete all as specified and directed by Engineer-in-Charge

M&L for dark shaded Virified Ceramic tiles 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade oftiles over and including 15mm thick screed beb in cement and sand mortar (1:6) including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) 75mm thick in plinth protection surface finished even & smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC solid block masonry type B1 of (1:2:4) built in cement and sand mortar ( 1:6) width exc. 10 cm etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in cement and sand mortar (1:6) on any type of face of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in cement and sand mortar (1:4) on any type of face of concrete/brick masonry surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for 16 mm to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed by Engineer-in-Chargeetc complete all as specified and directed by Engineer-in-Charge.

Supply and fix powder coated aluminium three track window made out of Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass for two shutters including rubber / neoprene beading and locking arrangement,aluminium fabric 1.40 mm wire mesh for one shutter etc complete all as specified and directed by Engineer-in-Charge

Supply and fix powder coated aluminium door of aluminium sections Nos. 20671, 20672, 20690 & 20668 including rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge. Note : Glass shall be measured and paid separately.

Supply and fix powder coated aluminium partitions of aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick decorative laminated/ pinted PVC solid panel, rubber / neoprene beading and etc complete all as specified and directed by Engineer-in-Charge

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and all as directed including taking down/ out existing. etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent makes mentioned in list of makes in Appendix `C'

M&L for machine pressed precast concrete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with gray cement & pigment over and including sand cushion 30mm thick etc complete all as specified and directed by Engineer-in-Charge

M&L for filleting in any position and to any shape, Section of fillet exc. 25 but n exc. 50Sqm in cement and sand mortar (1:3) including all mitres, stops, etc complete all as specified and directed by Engineer-in-Charge

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each panel etc complete all as specified and directed by Engineer-in-Charge

M&L for 5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each panel etc complete all as specified and directed by Engineer-in-Charge

Supply and fix stainless steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 300x450mm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surface of walls and applying 2 coats of cement paint external surfaces etc complete all as specified and directed by Engineer-in-Charge

Dismantling of Manglore pattern roofing tiles with ceiling tiles or slate roofing etc complete all as specified and directed by Engineer-in-Charge

Dismantling of Battens for tiles spacing exc 15 cm distance, shingles etc, of any size including tilting fillets etc complete all as specified and directed by Engineer-in-Charge

Demolition of brick/ stone masonry/block masinry built in cement or lime mortar etc complete all as specified and directed by Engineer-in-Charge

M&L Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only), in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L Walling of polygonal rubble, uncoursed well bounded, bedded solidly hearted built in set in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slabs and tiles of any description or thickness as in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:2:4 Type B-1 (20 mm graded stone aggregate) in hold fast blocks and rafter bed blocks and Gola etc complete all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic coloured tiles 8 to 10 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for vitrified ceramic coloured light tiles 10mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemenet to match the shade of tiles over 15mm thick screed bed of cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : (i) Model Olympia Satin Finish silent square range of Nirali or equivalent makes mentioned in list of makes in Appendix `C'

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MSH1141 of Marc or equivalent makes mentioned in list of makes in Appendix `C'

Supply & Fix in repair health faucet with 8 mm dia 1 mtr long flexible tube wall mounted/hooked etc complete all as specified and directed by Engineer-in-Charge

Supply & Fix in repair hand shower of 1mtr long with all connected accessories etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm etc complete all as specified and directed by Engineer-in-Charge of Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) of MARC or equivalent makes mentioned in list of makes in Appendix `C'.

S&F in 10 mm thick toughen glass for shelves in corner etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

M&L for forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 15 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 20 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for 16 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

M & L for 20 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

Rendering 15 mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including water proofing compound @ 3% of weight of cement etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted Wood or wood based surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel etc complete all as specified and directed by Engineer-in-Charge

Supply only intergral water proofing compound etc complete all as specified and directed by Engineer-in-Charge

Preparation of old plastered surfaces and applying one coat of cement base paint on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for 12 mm mesh, Wire netting of galvanised steel wire 0.71 mm dia fixed with tinned tacks of wire staples etc complete all as specified and directed by Engineer-in-Charge

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specifed and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc.

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 83 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board etc complete all as specifed and directed by Engineer-in-Charge. Make of FRLSH Cable.Havells/Polycab/Finolex

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge.

S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge.

S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required etc complete all as specifed and directed by Engineer - in - Charge.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 96 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, on way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs Concealed in Wall 4 way TPN, 415 volts ,protection class IP-42,including 63 Amps MCCBs suitable for fixing of MCBs etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent makes mentioned in list of makes in Appendix `C'

S & F in replacement double door Sheet metal enclosures factory made DBs 8 way SPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent makes mentioned in list of makes in Appendix `C'

Supply & fixing MCB, SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.

S&F High bay 70 Watt light fittings Energy Saving,environment friendly & robust IP65 protected LED midbay with PDC housing suitable for ceilingSurface/Suspended) mount & avilable in wide beam optics etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge.

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing wall mounted air Circulator Heavy duty 450 mm fan, steel body including fixing nut ,bolt ,clamps etc complete all as specified and directed by Engineer-in-Charge.

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable16 Sqmm, 4 core.

(b) LT cable10 Sqmm, 2 core.

Supply & Lay HDPE pipe 40 mm bore light weight with 0.95 gm/cm2 IS: 4984(1995) PN 2.5 for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement Change over switch 32 Amps 230 Volts with all acccessories etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 36 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 36 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ THD < 30% etc complete all as specified and directed by Engineer-in-Charge. Make : Philips Cat Part No RC360B LED 36S-6500 V1 L60PSU OD or equivalent makes mentioned in list of makes in Appendix `C'

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge

Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Taking out old U/S fan and deposted to E/M Store yard ,Supply and fix exhaust fan,steel body AC Single phase,230 V of size 300 m sweep with ,blades and frame and louvers 450 mm sweep heavy duty etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 36,582.00 shall be deducted from BOQ on account of schedule of credit