Construction of Infrastructure for the Proposed Peace Camps at Ingourok in Thoubal District and Kakching Khunou in Kakching District for Accommodation of UNLF Cadres Under Peace Agreement in Manipur SH A, B and C at Ingourok Thoubal District Manipur

Amount

SH (A): Conventional Semi-Pucca Building for 400 cadres and other infrastructure.

(i)32 bedded semi pucca Barrack with isolated footing, RCC column,Half brick walling, Rcc stiffeners, Steel truss, Pre-painted profile sheet roofing, C.C. flooring etc. etc.) - 8 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coal tar of approved

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/ Uchan wood

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(ii) 18 bedded semi pucca Barrack with isolated footing, RCC column,Half brick walling, Rcc stiffeners, Steel truss, Pre-painted profile sheet roofing, C.C. flooring etc. etc. - 8 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coal tar of approved

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(iii) 40 Capacity semi pucca kitchen cum dining with isolated footing, RCC column,Half brick walling, Rcc stiffeners, Steel truss, Pre-painted profile sheet roofing, C.C. flooring etc. etc. - 4 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coal tar of approved

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thickhard board ground fixed to wooden cleats with C.P. brass screwsand washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(iv) Semi-Pucca 8 W.C. Wash Room with isolated Footings, R.C.C. Column steel truss; Prepainted profile sheet roofing i/c 50 User Septic Tank - 5 nos

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

(b) 1:3:6 (1 cem :3 Local coarse sand:6 graded stone aggrt.40mm n/size).

(c) 1:2:4 (1 cem :2 Local coarse sand:4 graded stone aggrt.20mm n/size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(d ) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and placing on terrace polythelene water storage tank IS 12701 marked with cover and suitable loacking arangement and making holes for inlet outlt anfd over flow pile but with out fitting and base support for the tank

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(v) Semi-Pucca 8 Bath with isolated Footings, R.C.C. Column steel truss; Prepainted profile sheet roofing - 5 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (i) 150 mm diameter

Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thickhard board ground fixed to wooden cleats with C.P. brass screwsand washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(i) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and placing on terrace polythelene water storage tank IS 12701 marked with cover and suitable loacking arangement and making holes for inlet outlt anfd over flow pile but with out fitting and base support for the tank

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(vi) C/o Steel staging and overhead Platform (2.2x2.2 m) PVC Tank for the W.S. & S.I. of the Bath and W.C. - 10 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(A) Internal work - Exposed on wall. (i) 15 mm nominal outer dia Pipes

Providing and placing on terrace polythelene water storage tank IS 12701 marked with cover and suitable loacking arangement and making holes for inlet outlt anfd over flow pile but with out fitting and base support for the tank

(vii) Arm Kote - R.C.C. Frame Structure with Rcc isolated Footings, R.C.C. wall and RCC slab and Rcc floor - 1 no.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(d) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(i) Using M.S. angles 40 x 40 x 6mm for diagonal braces.

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(viii) 2.44m, high fencing with angle iron post 3.05m long 50 X 50 X 6 mm plates at every 2.44 m apart. - 1 job

2.44m high fencing with angle iron posts 3.05m long 50x50x6mm plates at every 2.44m apart embedded in cement concrete block of mix 1:2:4 (1 cement : 2 c/sand:4 stone /agg /40mm gauge) 30.5x30.5x61 cm corner and at every 12th posts to be strutted,provided with 13(thirteen) horizontal lines and 2(two) diagonals of G.I .barbed wire 0.098 kg/m between two posts filled and fixed with G.I. staples i/c earth work in excavation etc. complete.

(ix) Sentry Tower - 4 nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Providing wood work in trusses, purlins, rafter, posts post plate & the like wrought framed hoisted & fixed in position.(a) Local best quality Uningthou wood

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Supplying 40 mm X 3 mm X 275 mm F.B. twisted plate i/c cost of bolts & nuts.

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall.

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coal tar of approved

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer.

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

P/F 20 mm thick plank as eave board with (a) Tolhao/Uchan wood

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

(xi) Entrance & Exit gate with Rcc post & M.S. shutter - 1 no.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

Brick work with Ist class common burnt clay F.P.S.(non modular)bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :(i) cement mortar 1:4 (1 cement : 4 Local coarse sand)

Providing and fixing steel gate partly grills and partly M.S. sheet 3.16 mm thick with M.S. angle frame of 65 X 65 X 6 mm including handles, hold fasts, locking arrangment and applying a priming coat of red lead paint ( as per standard design).

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand): (a) Flush / Ruled/ Struck or weathered pointing.

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

SH (B): Conventional Semi-Pucca Building for 4 ranking cadres and other infrastructure.

(i) Semi-Pucca Barrack type Qtr with Kitchen,Dining and Store. - 1 no.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 Local coarse sand:4 graded stone aggrt.20mm n/size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 Local coarse sand) including grouting the joints with white cement and matching pigments etc., complete.(a) Double charge vitrified tile polished finish (i) Size of Tile 600x600 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Local coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete (i) 8mm thick

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/ Uchan wood

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

SH (B): Conventional Semi-Pucca Building for 4 ranking cadres and other infrastructure.

(ii) Road work 5.75m width with 3.75 black topping width - 1 job

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.(A) By Manual Means (a) Using Screening Crushable type such as Moorum or Gravel. (i) Grading - I (Aggregate size - 63mm to 45mm) (a) Using screening crushable type such as moorum or Gravel.

(ii) Grading - II (Aggregate size - 53mm to 22.4mm) (b) Using Screening Type-B( 11.2mm aggrt.)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

P/F of premix sand seal with HMP of appropriate capacity not less than 75 tonnes using crush stone chipping 6.7 mm size and penetration bitumen of suitable grade

Surface dressing ( providing and laying surface dressing as wearing course in single coat using crushing stone aggragate of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller) i) 13mm nominal size chipping

SH (B): Conventional Semi-Pucca Building for 4 ranking cadres and other infrastructure.

(iii) Semi-Pucca Admn Hall and Canteen. - 1 no.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, Piers , abutment , post and struts

(c) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately.(a) (b) Local best quality Uningthou wood

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) local best quality tolhao wood

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

Providing and fixing 40 X 6 mm FB wind ties to G.I. sheet roof with hook bolts.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheet (size , shape and pitch of corrugation as approved by engineer in charge ) with zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne . Sheet should have protective guard film of 25 microne minimum to avoid scratchduroin trand portatio and should be supplied in single length upto 12 m or as desired by engineerin charge . The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm ) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlin, rafter and trusses and including cutting to size and shape where ever required with 2. Precoate galvanised iron profile sheet 0.50 mm thick

Provioding and fixing precoated galvanised steel sheet roofing accessories zinc coating 120 grame per sqm as per IS: 277 in 240 mpa seel grade 5-7 microne epoxy primer on both side of the sheet anf polysr=ter top coat 15-18 microne using self drilling / self tapping screws with polymer coated J or L hook bolt and nuts and or GI seam bolt and nut Gi plain and bitumen waser complete . Ridge plain (500-600)mm Precoated galvanised iron profile sheet 0.40 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots , including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Local coarse sand : 6 graded stone aggregate 20mm nominal size).

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Coal tarring two coats on new work using 10 sqm. not less than 1.6 litres of coal tar of approved

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) New work (two or more coats)over and including priming coat with cement primer

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as per manufacturer specifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:

Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over Painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/ 10 sqm over

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thickcement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as perstandard design.

P/F 20 mm thick plank as eave board with (a) Tolhao/ Uchan wood

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thickhard board ground fixed to wooden cleats with C.P. brass screwsand washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

SH (B): Conventional Semi-Pucca Building for 4 ranking cadres and other infrastructure.

(iv) Community Ground Sump for 25,000 litre capacity - 3 nos

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:3:6 (1 cem :3 Local coarse sand:6 graded stone aggrt.40mm n/size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(c ) Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc.

(d) Edges of slab and breaks in floors and walls (i) Under 20cm wide

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

Providing laying and compacting Granular Base/Sub base with naturally occuring Sand Gravel Material free from organic ore other deleterious constituent spreading with Motor Grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness).

( C) Hill Cutting

(i) Hill Cutting and leveling in the complex including Approach Road and Parade ground etc - 1 job

Excavation in Soil with Dozer with lead upto 1000 meters (Excavation for road way in soil by mechanical means including cutting and transporting the earth to site of embankment/dumping area with lead upto 1000 meters including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)

Excavation in Ordinary Rock with Dozer with lead upto 1000 meters (Excavation for road way in soil by mechanical means including cutting and transporting the earth to site of embankment/dumping area with lead upto 1000 meters including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)

(SH:-Providing IEI in 32 Beded semi pucca barrack-8 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F surface/pendent mounting 1x18 W LED lamp channel luminaries complete with all accessories and connection etc as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:-Providing IEI in 18 Beded semi pucca barrack-8 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F surface/pendent mounting 1x18 W LED lamp channel luminaries complete with all accessories and connection etc as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:-Providing IEI in 40 capacty semi pucca kitchen cum dining-4 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:- providing IEI in the semi pucca 8WC-5nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated FR.Cu.conductor single core cable in surface/recessed pvc conduit with piano type phenolic laminated sheet size MS-box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group A

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Wiring for submain with 10 mm2 pvc ins.twin core weather proof cable on G.I. bearer wire etc. as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

P/F 32 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

(SH:- providing IEI in the semi pucca 8 bath-5 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated FR.Cu.conductor single core cable in surface/recessed pvc conduit with piano type phenolic laminated sheet size MS-box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group A

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Wiring for submain with 10 mm2 pvc ins.twin core weather proof cable on G.I. bearer wire etc. as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

P/F 32 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

(SH:-Providing IEI in the arm kort- 1 no.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:-Providing IEI in Sentry Tower-4 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 32 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

(SH:-Providing IEI in the semi pucca barrack type quarter with kitchen dinning and store 4 (four) senior ranking cadres-1 no.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F surface/pendent mounting 1x18 W LED lamp channel luminaries complete with all accessories and connection etc as reqd.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:-Providing IEI in semi pucca Admn. Hall and Canteen-1 no.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:- Yard lighting)

SITC LED street light 100W 757K made of pressure dia housing with toughned glass & individual high power LED with secondary optics IP66 protection & impact resistance of ( Havells) ENDURAPEARLPLUSL100W complete with all accessories i/c connection etc.as reqd

S/F swaged type steel tabular pole 8 mt.long as per 410- S/P -14 conforming to IS-2713(Pt-II)1980 with bracket in cement concrete 1:3:6(1 cem.:3c/sand:6 gr.St. 40 mm (n/size) foundation i/c excavation and refilling etc.as reqd.

Cost of 2.5 sq mm Cu.condr. S/C cable FR.

Supply & drawing of AB cable of size (3×50+1×35) mm2

S/F L.T. cross arm 50×50×60 mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc. as reqd.

Design,supply ,installation testing and commissioning of L.T. Panel board of dust and vermin proof mounted with thickness of 16 SWG metal clad sheet with the suitable for use at 3-Phase,4 pole, 50 Hz 415V fitted with the following switch gears of four way outgoing conforming to IS/IEC:60947-2,HSN Code 8537

1. 200 amp. TPN on load changeover switch- 1 No

2. 200 amp. TPN bus bar chamber- 1 No

3. 125 amp. TPN thermal adjustable MCCB-4 Nos.

P/L 70 mm2 four core pvc ins.(heavy duty ) Al. cond. Armoured cable of 1.1KV grade in size not exceedding 25mm2 direct in ground i/c excavation , sand cushioning protective covering and refilling the trench etc.as reqd

P/L 4mm2 twin core pvc ins.(heavy duty ) Cu. Cond armoured cable of 1.1KV grade in size not exceedding 25mm2 direct in ground i/c excavation , sand cushioning protective covering and refilling the trench etc.as reqd

P/L 25mm2 four core pvc ins.(heavy duty ) Al. cond. Armoured cable of 1.1KV grade in size not exceedding 25mm2 direct in ground i/c excavation , sand cushioning protective covering and refilling the trench etc.as reqd

Supply, Installation ,Testing & Commisioning of solar LED street lamp All-In- One with in built SCC system wattage of 30 W of make Crompton Greaves Ltd. Code no. CSADEMP25/30CDL, 140 Lumen/ Watt high efficiency crystalline solar SPV Panel and G.I. Tubular / Octagonal pole of 6mt. high including connection and muffling in R.c.c 1:3:6( 1cemt: 3c/sand : 6 stone aggrt of 40 mm n/size ) including centering, shutturing, earth work etc.as reqd

M/s Seven Clan Agency (BID ID -8422)

M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS (BID ID -8423)