Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC 17 1 ABHOY HALDER LANE KOLKATA | KOLKATA | ₹1.1 Cr | L1 | Accepted-AOC LOWEST RATE QUOTED |
| 2 | L2₹1.2 Cr+₹2.4 L (2.10%)Rejected-Finance 138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL | ₹1.2 Cr+₹2.4 L (2.10%) | L2 | Rejected-Finance HIGHER THAN L1 |
| 3 | L3₹1.2 Cr+₹3.0 L (2.62%)Rejected-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 UDYAM WB 23 0013338 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | ₹1.2 Cr+₹3.0 L (2.62%) | L3 | Rejected-Finance HIGHER THAN L1 |
| Sl No | Description | Qty | Unit | ORIENTAL ENGINEERING CO. L1 | WEST BENGAL ENGINEERING CO. L2 | DEY ENTERPRISE L3 |
|---|---|---|---|---|---|---|
| 1.00PART-A | ||||||
| 2.00 | Supply, Delivery and storage at Site of following specification Horizontal Split Casing Centrifugal Pumping Machinary with baseplate, flexible coupling, coupling guard, foundation bolt etc. with suitable capacity Horizontal foot Mounted Induction Motor (IE 3 type) for the pump duty mentioned below having the following Specification and as per NIT. ( No load as well as short-circuit Test Certificate of induction motor during test run has to be submitted during the delivery.)
a) Capacity : 330 m3 / hr.
b) Total Head : 73 mtrs. | 2 | Sets | 11,75,756 ₹23,51,512 Lowest | 12,00,472 ₹24,00,944 | 12,06,356 ₹24,12,712 |
| 3.00 | Supply, Delivery and storage at site of Vacuum Pumping Machinary with baseplate, coupling, coupling guard, foundation bolt etc.. Motor - Horizontal foot Mounted Induction motor suitable for the vacuum pump duty mentioned above with adequate margin with the following specification and as per NIT.
a) Vacuum upto 640 mm of Hg
b) Air Flow Rate upto 73 m³ / Hr | 2 | Sets | 1,54,897 ₹3,09,794 Lowest | 1,58,153 ₹3,16,306 | 1,58,928 ₹3,17,856 |
| 4.00 | Supply, Delivery and storage at site of Submersible dewatering Pumping Machinary with baseplate, coupling, coupling guard, foundation bolt etc. with the following specification and as per NIT. Motor submersible type 3 phase, 415 Volt, 50 Hz, as per Technical Specification given in NIT. Discharge :- 230 LPM
Generated Head :- 10M | 1 | No | 38,409 ₹38,409 Lowest | 39,216 ₹39,216 | 39,408 ₹39,408 |
| 5.00 | Supply, delivery and storage at site manually operated 350 mm dia Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS: 14846/BS 5163 PN-1.0 and as per detail given in NIT. ( AT SUCTION SIDE OF PUMP )
(Test Certificate, Waranty certificate to be submitted for each valve at the time of delivery) | 2 | Nos | 1,45,677 ₹2,91,354 Lowest | 1,48,739 ₹2,97,478 | 1,49,469 ₹2,98,938 |
| 6.00 | Supply, delivery and storage at site of 300 dia Doble Flanged Cast Iron Single Door Swing Check N.R.V with by-pass arrangement as per IS : 5312, Part-I, PN-1.6 and as per detail given in NIT. ( AT DELIVERY SIDE OF PUMP ) (Test Certificate, Waranty certificate to be submittered for each valve at the time of delivery) | 2 | Nos | 64,914 ₹1,29,828 Lowest | 66,279 ₹1,32,558 | 66,603 ₹1,33,206 |
| 7.00 | Supply, delivery and storage at site of 300 dia Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 16 kg/sqcm (seat test) and body tested to 24 kg/sqcm. All the valves should be tested by closed end method only. ( AT DELIVERY SIDE OF PUMP ) (Test Certificate, Waranty certificate to be submittered for each valve at the time of delivery) | 2 | Nos | 71,845 ₹1,43,690 Lowest | 73,355 ₹1,46,710 | 73,715 ₹1,47,430 |
| 8.00 | Supply, delivery and storage at site of 300 dia Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 16 kg/sqcm (seat test) and body tested to 24 kg/sqcm. All the valves should be tested by closed end method only. (AT COMMON DELIVERY HEADER) (Test Certificate, Waranty certificate to be submittered for each valve at the time of delivery) | 1 | No | 71,845 ₹71,845 Lowest | 73,355 ₹73,355 | 73,715 ₹73,715 |
| 9.00 | Supply, delivery and storage at site of 80 mm dia Cast Iron kinetic double orifice air released valve as per relevant IS, PN-1.6.and as per detail given in NIT. (AT COMMON DELIVERY HEADER ) | 1 | No | 28,179 ₹28,179 Lowest | 28,771 ₹28,771 | 28,912 ₹28,912 |
| 10.00Supply, delivery and storage at site of following dia. MS Dismantling joints with Rubber compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts PN-1.0 / 1.6. as per detail given in NIT. | ||||||
Tender Value
Refer Docs
EMD Value
₹2.3 L
Closing Date
4 Jan 2023, 2:00 pmClosed
SUPERINTENDING ENGINEER
81/2/7, PHEARS LANE, COMMERCIAL COMPLEX, 3RD FLOOR, KOLKATA-700012.
Providing and Installation of Electro-Mechanical Equipments and allied Works at Damalia under Augmentation of Amritnagar Zone-I Water Supply Scheme, Block - Raniganj, Dist -Paschim Bardhaman.
2022_PHED_430283_1
19/SE/MC-I/WBPHED/2022-2023
Open Tender
Electrical Work/ Equipment
Item Rate
365 days
PASCHIM BARDHAMAN
Please refer Tender documents.
6 documents required · 6 mandatory
₹2.3 L
17 Feb 2023
6 Dec 2022
6 Jan 2023
7 Dec 2022
4 Jan 2023
7 Dec 2022
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
2911_WBF_new2019.pdf
Tender Documents • 0.66 MB
VENDOR_LIST.pdf
Additional Documents • 0.19 MB
BOQ_852204.xls
BOQ • 0.30 MB
TECH_SPECH.pdf
Additional Documents • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .