Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹38.8 L+₹4,833.62 (0.12%)Rejected-Finance | L2 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 1,11,797.00 | |
| 3 | L3₹38.8 L+₹7,631.41 (0.20%)Rejected-Finance 23 8 SANJAY COLONY AKHNOOR 181201 JAMMU KASHMIR | AKHNOOR | JAMMU | JAMMU KASHMIR | 181201 | L3 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 1,11,797.00 | |
| 4 | L4₹39.3 L+₹59,390.65 (1.53%)Rejected-Finance R O BHARDA KALAN P O TEH AKHNOOR PIN 181201 DISTT JAMMU J K | JAMMU | JAMMU AND KASHMIR | 181201 | L4 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 1,11,797.00 | |
| 5 | L5₹39.3 L+₹61,879 (1.60%)Rejected-Finance | L5 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 1,11,797.00 |
Tender Value
₹47.8 L
EMD Value
₹95,680
Closing Date
23 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH AKHNOOR
GE NORTH AKHNOOR Pin 181201 CO 56 APO
SPL REPAIR TO BLDG NO P 130 01 TO 04 OR MD ACCN OF FD HOSP BLDG NO P 36 37 38 OF 698 COY ASC BLDG NO TR 03 TR 09 OF HQ 135 INCL PROVN OF DRAINAGE ON SOUTHERN SIDE OF BLDG NO P09 AT T98 AT AKHNOOR UNDER GE N AKHNOOR
2022_MES_565211_1
GE(N)/AKH-70/2022-23
Open Tender
Coal Works
Item Rate
180 days
Akhnoor
D Class cat a i
8 documents required · 8 mandatory
₹500
GE NORTH AKHNOOR
₹95,680
Yes
28 Feb 2023
25 Nov 2022
26 Dec 2022
25 Nov 2022
23 Dec 2022
9 Dec 2022
Amount
Taking down old treatment incl paddding, sunken floors ,removing existing bitumen felt treatment incl brushing,cleaning top surfaces of roof slab, brooming etc complete all as specified.
M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair finishes of brick work or concrete surface of roof slab all as specified.
Roof treatment :- (a) Apply a coat of Bituminous primer conforming to IS - 3384 @ 0.40 Kg/Sqm on prepared surfaces. (b) After drying of primer apply a coat of hot blown 85/25 penetration grade blown bitumen conforming to (IS-702 @ 1.20 Kg/Sqm of surfaces. (c) Provide APP modified polymeric five layed membrane with central core of 100 micron high molecular high density film. Minium width of APP modified water proofing membrane shall be 3 Kg per Sqm. Product Name Multi p[lus manufactured by M/S STP texa Ltd Gurgoan/Hyper Plus Standard Manufactured by IWL India ltd Chennai, Bengal Acquaflux manufactured by Bengal bitumen New Delhi/Superior plus 310 by STP Lfd and any other product as appproved by E-in-C Br will be used. APP membranne will be laid across the slop from lowest line of slopping roof toward ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown. (d) Over the APP membrane apply semi hot blown 85/25 grade bitumen penetration of bitumen when tested as perIS 1203 will not be more than 40/Confiming to IS 702 @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bvitumen coat. (e) Coved fillet in PCC (1:2:4) type BO radius 75mm shall be provided at the junction of roof and vertical surface such as parapet wall around opening and treatment mentioned above (except fine sand) shall be applied followed by a cement plaster 20mm thick in CM 1:6. Note:-Water proof compound rate is not paid seperatly.)
Sunken Floor treatment :- ditto all as per srl item No 3 but in floors. Note :-Concrete for sunken slabs shall be mixed with WP comounds as manufacturdrs instructions before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested ( Water proof compound rate is not paid seperatly.)
Fixing 10mm dia PVC nozzles and injection grouting using Dr Fix IT URP 301 of M/s Pidilite Industries or equivlent as in sunken floor/ceiling all as per manufacturer's instrutions. Note : Nos and location shall be as directed by Engr-in-charge.
M & L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors including screed bed 10mm thick all as specified and directed by Engineer-in Charge.
Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.
M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .
M&L for rendering 10 mm thick cement plaster with cement mortar(1:6)on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.
M & L provinding 1mm thick wall care putty on internal walls.
M&L for rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement.
M&L for preparation & complete removal of exising treatment of old surfaces.
M & L preparation of newly/Old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer all as speicfied and directed.
M& L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior grate primer applied @ 0.90 litre/ 10 sqm over new/ old surfaces all as speicfied and directed.
M& L for preparation of new /Old treated surface and apply two coats of Oil bound distemper on ceiling.
Repair to balcony/Facia and soffit of chajjas etc by taking down old rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including formwork/scaffolding work upto height 6.5mtr above ground level of bldg complete all as specified.
Demolition of RCC water tanks (of any capacity measured in cum not in number ) , Rcc cooking platform (slab) , chimneys concrete of any description in any position not otherwise specifically provided for cement concrete all as specified and directed by Engineer-in-charge.
Reinforced cement concrete nominal mix type B-0 1:2:4 (12.5 mm graded aggregate) for cooking platform ,Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed by Engineer-in-charge.
S & F mild steel bars 10mm dia Fe 410W Gde E-250 and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete fixed in repairs all as specified and directed.
M & L for formwork to sides and soffits/faccia of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises
M & L Green Marble work 18mm to 20mm thick (tabel rubbed and polished) in steps of staircase/kitchen platform and like in cement mortar (1:4) inclduing pointing in white cment (1:2) using marble dust with admixture of opigment ot match with marble shade of Green marble including 15mm thick screed bed/base in CM 1:4, roughening/cleaning to existing surface of old concrete floor by pickin, sweeping clean and washing down with water to remove dirt/dust and brushing neat cement slurry with 3.0 kg of cement persqm all as specified and as approved by the GE/Engr-in-Charge.
M&L Non skid ceramic coloured tiles600x600x 7 to 8 mm thick (square / rectangular) in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors/Skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
M&L Glazed ceramic tile 350 x 250 x 06-7mm thick (coloured) on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. Make : Kajaria/Somany/Orient Bell.
M&L for machine cut kota stone slab flooring 18-20mm thick as in riser of steps ,skirting, dado and pillar , over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick in CM 1:3 screed for laying Kota Stone.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) nexc 1.50 sqm complete all as specified and directed.
M & L Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame of following sizes of frame :-125X60mm.
Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame of following sizes of frame :-105x60mm.
S & F Factory made solid panel PVC door incl Almirah / Kitchen Cupboard / (wooden texture) shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as directed & specified.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.
S & F aluminium kitchen concealed cupboard door hinges with installation all as specified and directed by Enge-in-charge.
PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame.and including 50 mm parapet coping all as specified etc.
PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed by Engineer-in-Charge.
S & F 35mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I complete all as specified and directed by Engr-in-Charge.
S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a).
Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F 100 mm butt hinges, medium weight cold rolled mild steel.
S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.
S&F Aluminium anodised barrel tower bolt 150 mm, extruded section.
S& F Hasp and stapple safety type of aluminium anodised 100 mm long as a cupboard locker.
S&F Aluminium handles cast type anodised of size 75mm long ISI marked complete.
S& F aluminium anodised sliding door bolts round nuckle with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified.
S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .
S&F Steel windows/ventilator (Box type) factory made without glazing bars shutter only complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .
S&F Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in repairs.
S&F Glazing with sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.
S&F figured glass sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.
S&F Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed.
S&F curtain rail ,20 mm dia Stainless steel ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.
M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.
Demolition of concrete in ground floor and paving n.exc 15cm thickness (below or above ground level complete all as specified and directed.
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity white in colour & triple layer,(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete.
Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of following descriptions :-20 mm including taking down old pipe.
Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of following descriptions :-15 mm including taking down old pipe.
S&F stop valves cast copper alloy screwed down high pressure , 15 dia bore fixed in repairs.
S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs.
S&F ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore.
PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs.
S&F vitreous china squtting pan "Orissa Pattern" size 580 x 440 mm in any coloured with integral foot rest incl lime motor, 'S' trap and complete all as specified, fixed in repairs.including taking down all as specified.
S&F PVC connection 15 mm size with PTMT nuts 450 mm long.
S&F Aluminium anodised towel rail 20mm dia 'D' type 60 cm long between flanges .
S & F Stainless steel gratings 100mm dia with hole and fixed with cement motar.
S&F Swivel shower of PTMT any colour for fixing with 15 mm pipe ,with shower arm of size 195 mm long with bend of 54 digree with flange of any colour (minimum weight 40 gm), supplied and fixed in repairs complete.
Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . All as specified.
S & F 110mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.
S & F 75mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) waste pipes/Rain water pipes 110mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729 complete all as specified and directed.
All as description of Srl No 71 above but 75mm bore.
S & F in replairs PVC SWR bends any radius 110 mm bore all as specified.
S & F in replairs PVC SWR bends any radius 75mm bore all as specified.
S&F PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) for pvc pipes, 110 mm bore complete all as specified and directed.
S&F PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) for pvc pipes, 75 mm bore complete all as specified and directed.
S & F PVC branch piece , single (Y) 110mm single equal or unequal ordinary or inverted (spigot or socket type) with access door with paralled branches all as specified and directed.
S & F PVC branch piece, 75 mm double (Y) equal or unequal ordinary or inverted (spigot or socket type) with access door with paralled branches all as specified and directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) cowls 110mm all as specified directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) cowls 75mm all as complete all as specified.
S & F PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified.
S & F Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm complete all as specified and directed.
S & F kitchen sink bowl with drainage board gloss finishing stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing in reinforcement cement concrete slab and connecting union to pipe overall 510 x 430 x203 mm supplied and fixed in repairs with complete fittings all as specified and as directed by Engineer-in-Charge.
S & F CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed.
S & F Bib taps (Long body) , fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified.
S & F CP Brass wall mixture with Telephonic shower arrangement for mixing hot cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type in repair complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches , pillars etc.
M&L Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6
M & L grubbing up bushes , tree trunk portion n exc. 30cm including cutting of trees/bushes grown in over wall , digging out roots in roofs and below the ground level up to 1 m , filling holes and levelling of ground , stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and cleaning site complete all as specified and directed.
M&L for rendering 15mm thick cement plaster with cement mortar(1:4)on roof slab, finished even & smooth(without using extra cement.
Complete removal of existing treatment on walls all as specified.
Preparation of newly/old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed by Engineer-in-Charge.
25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified and as directed by Engineer-in-charge.
Ditto all as per item No 26 here-in-before but in skirting/dado, steps etc incl 10mm thick CM 1:4 complete.
Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Tubular towel rail aluminium anodised 20 mm dia, D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.
Stop valves/angle valve, cast copper alloy, chromium plated fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge
S&F of Brass chromium plated shower rose125mm with or without swivel joints fixing to steel pipe fixing in repair.
.S&F mild steel framed work as in grills,gratings ladders etc with ends of bar shouldered and/or riveted or welded or forged into spikes,framed guard bars,ladders,framed balusters etc and similar work conforming to Fe-290,grade E-165, complete all as specified
35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.
35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and as directed by Engineer-in-Charge.
250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed by Engineer-in-Charge.
200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.
300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.
Preparation of old painted steel surfaces of any description exc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed.
M & L for excavating in trenches, n.exc. 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out in any type of soil, complete all as spd and directed by engineer-In-charge.
Plain cement concrete type E2 1:5:10 (usingh 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.
M&L for precast RCC type B-1 1:2:4 (using 20mm graded crushed stone aggregates) in cover slab ( for manholes) and smilar articles with plain faces and set in cm 1:4
M&L PCC 1:2:4 using 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as in coping, benching of man holes including weathering slightly rounded or chamfered angles complete all as specified & directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips with Fe 500 grade fcomplete all as specified.
M&L brick work with sub class "B '' bricks (old size) stright or curved on plan exc 6 m mean radius built CM 1:6 all as specified & directed.
M&L Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finshed even and smooth without using extra cement complete all as specified
M&L for 150 mm dia reinforced concrete pipes, class NP 3 with collars laid in trenches and jointed as specified.
M&L Concrete bed to drain pipes of dia 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) complete all as specified.
.Returning, filling incl spreading leveling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed by Engr -In Charge.
Removing excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed by Engr -In Charge.
Soakage well exc in ordinary soil,foundation in pcc 1:3:6,well of honeycombed and soil in M-25 concrete including intercepting champer,screen champer brick work in CM,RCC cover slab in M-25/RR masonary/filling with brick bats (size 2.4 M dia X 4.50M deep)Drg No CE/TD-1202/03 sheet 1/2 & 2/2 all as directed.
Dismantling of AC corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling timber scantlings (Framed work) 40 Sqcm and over in section, in any position complete all as specified.
M&L plain cement concrete type B0 1:2:4 (using 20mm graded crushed stone aggregate) as in bed block, plinth courses, apex stones etc complete all as specified.
S&F structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle or channel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifiedd.
Ditto all as per item No 125 here-in-before but plain sheets
M&L Reinforced Cement concrete (Design mix) M-25 using 20 mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span, lintel bends etc complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) flat fair finished surfase complete all as specified and directed by engr in charge.
TMT steel bars 6 to 8mm dia, cut to length bent to shape required including cranking bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
S&F mild steel Framed work such as water tank stand , cooler stand ,grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including ceiling frame work.
GI frame work 605 x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and wev of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each web of 45mm suspended from sofit itat approx x 900mm c/c with GI cleat and steel expansion fasteners with and including celing section (n.exc 1.2m length) of 0.55mm thickness having kruled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 c/c incliding 4mm thick Non absetos prelaminated designer board in grid all as specified and directed by Engr-in-Charge.
M&L Vitrified Ceramic tiles(light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
S&F Vitreous China pedestal pattern white with CI 'P' or 'S' trap front or back inlet (excluding supply but fixing of flushing cistren and flush pipe ) fixed in repairs complete all as specified and directed.
S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr in Charge. Make Cera,Jaquar and Hindware
S & F Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device Make Cera,Jaquar and Hindware
S& F CP grating doom with cockoach traper 100 mm dia of PTMT (min weight 25gms),fixed in repairs,complete all as specified and directed by Engineer in Charge. Make Cera,Jaquar and Hindware
S&F Brass stop valves cast copper alloy screwed down high pressure , 15 dia bore fixed in repairs. Make Cera,Jaquar and Hindware
S&F Brass stop valves screwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs. Make Cera,Jaquar and Hindware
S & F CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed. Make Cera,Jaquar and Hindware
S & F Roatational moulded polyethylene triple layer water storage tank 500 Ltrs Capacity, white in colour(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed.Make Sintex ACE ,Vectus and Plasto
S & F hand shower (Health faucet wit 1 mtr long easy flexible tube in chrome finish and wall hook all as specified and directed by Engineer in Charge. Make Cera,Jaquar and Hindware
S&F Swivel CP shower for fixing with 15 mm pipe ,with shower arm of size 195 mm long with bend of 45 digree with flange of any colour (minimum weight 40 gm), supplied and fixed in repairs complete. Make Cera,Jaquar and Hindware
S&F Glazed and skeleton shutters 35mm thick second class soft wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a).
S&F Aluminium handles cast type anodised of size 100mm long ISI marked complete.
S&F Aluminium handle cast type anodised of size 150mm long ISI marked complete extruded
Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . all as specified.
S & F 110mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.
S & F 75mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) waste pipes/Rain water pipes 110mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729 complete all as specified and directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) waste pipes/Rain water pipes 75 mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729 complete all as specified and directed.
S & F in replairs PVC SWR bends any radius 110 mm bore all as specified.
S & F in replairs PVC SWR bends any radius 75mm bore all as specified.
S & F PVC branch piece , single (Y)ipes 110mm single equal or unequal ordinary or inverted (spigot or socket type) with access door with paralled branches all as specified and directed.
S & F PVC branch piece, 75 mm double (Y) equal or unequal ordinary or inverted (spigot or socket type) with access door with paralled branches all as specified and directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) cowls 110mm fall as specified directed.
S & F PVC SWR Type-B (pressure not less than 6 Kg/cm2) cowls 75mm fall as complete all as specified.
S & F PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified.
M&L for precast RCC type B-1 1:2:4 (using 20mm graded crushed stone aggregates) in cover slab ( for manholes) and smilar articles with plain faces and set in cm 1:4
.M&L for 150MM dia SGSW Pipes salt-glazed stone ware (SGSW) pipes of grade 'A' laid in trenches and jointed as specified.
M&L Concrete bed to drain pipes of dia 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) complete all as specified.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore pipe all as spd and directed by the Engr-in-Charge.
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
(a) One light point/fan /bell point controlled by one switch.
(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
(d) One bell/buzzer point controlled by one bell push.
Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
(a) One 15 amps power socket outlet point controlled by one 16 amps switch on independent board.
(b) One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.
Supply & fixing modular type switch 6 Amps, single pole, 1way,1 module,240V, ISI Marked complete all as specified and directed.
Supply & fixing modular type switch 16 Amps, single pole,1 way,1 module,240V, ISI Marked Complete all as specified and directed.
Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked Complete all as specified and directed.
Supply & fixing modular type socket 6 A/16 Amps -2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed
Supply & fix fan regulator modular type electronic, stepped type 100 Watts, 2 module 240Volts,AC ISI marked complete all as specified and directed.
Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed
Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 12 way 240 V with 200 Amp bus bar including blanking plates where required .
Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240 Volts,50Hz , ISI marked complete all as specified and directed (In accordance with IS/IEC 60898-1) 240 V/, 50 Hz, 10 kA Suitable all as specified
Supply & fix MCB SPN 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed
Supply & fix MCB triple pole & neutral, 63 Amp, AC, 10 KA repturing capacity 415 volt, 'C' series, complete all as specified & directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.Note:- The required resistance of Earthing shall be less than 3 ohm, If not found to the required resisstance, the contractor has to re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
Supply and fixing ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) incl taking down existing and deposit with MES all as specified and directed.
Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 10 sqmm 2 core all as specified and directed.
Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 16 sqmm 2 core all as specified and directed.
Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 16sqmm 4core all as specified and directed.
Excavation in tranches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed .
Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
M & L for protection to cable with one layer of brick laid flat across the cable using all size sub class 'B' Bricks.
Sand cushioning to under ground electric cables including watering and consolidation all as per clause 19.75 of SSR Part-I
S & F in replacement of 35 Watt LED energy saving light fitting environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 Nos of FI clamp 32 x 4mm with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable complete all as specified and directed .
Supply & fix LED batten with battery/inverter capacity 20 watt having charging time 8 hour, driver efficiency >85%, power factor>95% and operating voltage 270 volt complete all as specified and directed.
Taking down unserviceable Sub main wiring and M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty including cutting and cheasing and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
S& F in replacement of Energy saving 10 Watt LED Bulk head luminaries, 230V, 50Hz with oval shape, surface mounted, comprising high brightness LEDs complete all as specifed and directed.
Supply & fix angle lamp holder with LED Bulb, insulated body with back plate for batten fittings complete all as specified and directed.
Supply and fixing buzzer, ding dong AC, 230 volts single pole.
S & F modular bell push 6A , 1 module, 240V, ISI Marked Complete all as specified and directed.
Supply and fix LED secruity light fitting of capacity 20 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make :- Havells model No.ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent in any approved make.
Supply and fixing VTPN verticle loadline double door distribution box (AD) are fitted with Bus bar neutral link, blanking plates of 4 way with suitable for incomming MCCB 'I/C' frame,having isolated neutral bar, mechanical impact strength IK09,door earthing suitable for MCCB upto 125 Amp ,IP43 protection etc Make -Legrand cat No.5077 30 4 way,8+12 modules or equivalent make in any approved.
Supply & fix sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way (conforming to IS-8623 as amended) painted with epoxy based powder coated painting suitable for flush mounting with 100amps copper busbar,neutral bar,earth bar fully insulated and cable ties for pre-wired, door earthing, Corner sheild for better protection,pan assembly for ease of installation,masking sheet and MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate reversable doors for IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make: Legrand cat No.5076 21 8 way, 8 module or equivalent make in Schneider/ABB
Supply and fix Exhaust fan 300 mm sweep metal body industrail type heavy duty electrical operated ,AC, 50Hz,ISI marked,900 rpm,IP-55 complete accessories including luvours and necessary fixing arrangements such as nuts, bolts & washers and connecting PVC sheathed copper conductor cable of size three core, 1.0 sqmm from ceiling rose to exhaust fan connector complete all as specified and directed.
Supply and fix GI bracket pipe of size 40 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including suitable fabricate MS flat iron clamps of 25X6 mm thick -02 Nos suitable for fixing any places with nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. Note :- Make of GI pipe Jindal/Tata/ Bansal in any approved
Taking down old unserviceable water storage heater of any type /capacity and including deposit to MES yard for safe custody and supply and fix of water storage heater (Geyser) of 25 ltrs capacity, vertical type with copper inner tank,heating element,thermostat, indicating lamps,pressure release valve / safety valve suitable for working on 240 volts, AC, 50Hz,ISI marked, 5 star rated and fixing on wall including providing hole fastners-04 nos and fixing arrangements such as including necessary plumbing work,PVC hot and cold water pipe etc complete all as spcified and directed. Make:- Venus /Havells /Racold Model No.ER25V/ Bajaj Model Majesty 25L GMH(RW) or equivalent in approved.
S & F GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches under floor, ducts etc with fixing clamps, nuts , bolts etc. all as specified.Make Jindal/Tata/Bansal
M & L for GI tubing medium grade with all necessary GI fittings like bends, elbow, unions, tees, sockets, short pieces, plugs, hooks/clamps etc. as required at site and laid in trenches as specified and directed for 25 mm dia in bore.
S& F stop vale, ISI marked cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unitons fixed of 25mm bore complete all as specified and directed.
Supply and fix Decorative wall mounted fitting, chrome finish fixture with froster glass suitable for 6 watt LED lamp and connecting up with twin core twisted copper wire from LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed.
Supply and fix sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for ACs/Geysers and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed.
Supply and fix LED bulb 9 watts, 240Volts,50Hz pin type and including removing old unserviceable item complete all as specified and directed. Make :- Havells CA No.LHLDEUEEML8R009 or equivalent in any approved make.
M/S KARAN SINGH CONTRACTOR
M/s Sekinder Paul Sharma
M/S JEEVAN LAL SHARMA
M/s Vishal Engineers
M/s Rajesh Kumar Contractor
M/s Trilochan Vikas Jamwal
NISHANT SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .