REPAIRS TO CERTAIN MD OFFICERS AND PERIODICAL SERVICES TO ACCN D1 D3 AREA MES COLONY AND OTM ACCN INCLUDING ELECTRICAL WORK IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights incuding switches etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps, switches, sockets, ceiling roes, etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn, zone A area ectc (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

Supply only following spares for replacement :- (a) Spring loaded G13 side holders (set of 2) suitable for 36/40W FTL fitting

(b) PVC / polycarbonate lamp holders batten/Angle type

(c)Supply only switch piano flush type 5 Amps SP one way complete all as specified

(d)Supply only switch piano type 15 Amps SP one way complete all as specified.

(e)Supply only socket 5/6 Amps flush mounted 3 pin complete all as specified.

(f)Supply only socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified.

(g)Supply only ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body.

S&F in replacement of modular step type fan regulator 120W, 2 module complete all as specified and directed

S&F in replacement of modular switch piano type 10 amps one way one module complete all as specified and directed

S&F in replacement of modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed

S&F in replacement of modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement of modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement of 1 module Blanking plates complete all as specifed and directed

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

M&L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided complete all as specified and directed

M&L in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed.

M&L in replacement of bell push, flush type 5 Amps complete all as specified and directed.

S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as directed.

M&L for point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) Ditto all as per item No. 23 above but One 3 pin 6 Amps socket out let point on independent board.

(c) Ditto all as per item no. 23 above but One 3 pin 6 Amps socket out let point on same board.

Ditto all as per item no. 23 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L for point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLSH copper cable 1.5 sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size 1.5 sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) Ditto all as per item no. 28 above but One 3 pin 6 Amps socket out let point on independent board.

(c) Ditto all as per item no. 28 above but One 3 pin 6 Amps socket out let point on same board.

(d) Ditto all as per item no. 28 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 4sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size4 Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete as specified and directed.

S&F in repairs flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed. Make: As per sample approved complete all as specified and directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note:Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

S&F in repairs 1100 volts grade heavy duty cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two single core cables. complete all as specified and directed

S&F in replacement of factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule.

S&F in replacement of MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

Ditto all as per item no 42 above but 08 way SPN DB (Double door)

Ditto all as per item no 42 above but 04 way SPN DB (Single door)

Ditto all as per item no 42 above but 04 way SPN DB (Double door)

Ditto all as per item no 42 above but 02 way SPN DB (Single door)

S&F distribution box 18 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, qty-1 nos, MCB SPN 06 Amp 230V, 50 HZ, complete all as specified and directed Make: Legrand Catpart No.601835 or equivalent in make as mentioned at makes list in PS

S&F in repairs MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in repairs MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TP 63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as specified and directed. Note :1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only.

(a) Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. Make:Tibcon/Epcos

(b) Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan. Make:SKF or equivalent in make as mentioned at makes list in PS

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given complete all as specified and directed.

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position complete all as directed by Engineer-in-charge for following :- (a) Celling fan of size 1200 sweep.

(b) Ditto all as per item no. 59 above but Exhaust fan of 300 mm sweep.

(c) Ditto all as per item no. 59 above but wall mounted fan of 400 mm sweep.

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades all as specified.

Ditto all as per item no. 62 above but exhaust fan of size 12" (300 mm) sweep

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and directed.

S&F in replacement of sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc complete all as specified and directed.

S&F in replacement of metal clad plug top 3 pin,10Amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.. Make : Ledrand Ivory 6500 22 or equivalent in make as mentioned at makes list in PS

S&F in replacement of plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.. .

S&F in replacement of plug top 3 pin, 5/6 amps, 230 volts, ISI marked complete all as specified and directed.. .

S&F in replacement of PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser complete all as specified and directed..

S&F in replacement of PVC insulated cable 2 core stranded copper conductor 0.5 sqmm complete all as specified and directed..

S&F in replacement of PVC insulated cable 2 core stranded copper conductor 1 sqmmcomplete all as specified and directed..

S&F in replacement of PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed..

S&F in replacement of PVC insulated cable 3 core stranded copper conductor 6 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed..

S&F for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed..

S&F in replacement 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as specified and directed..

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed..

S&F in replacement LED building security light fiitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed Note: Old security light should be deposited to MES store Make- Luker LSTE-30/ Havells ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC / Wipro LR02-331-XXX-57-XX or equivalent in make as mentioned at makes list in PS

S&F in replacement 1x20 watt,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed Make: Luker LTGT520 or equivalent in make as mentioned at makes list in PS

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete complete all as specified and directed Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH / Bajaj BCLAB 20W WH LED P or equivalent in make as mentioned at makes list in PS

S&F in replacement of 36 watt, 230V surface and wall mounted LED batten, IP65 rated protection suitable for outdoor application with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete complete all as specified and directed . Make- Luker LTOD40 or equivalent in make as mentioned at makes list in PS

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders complete all as specified and directed

S&F in replacement 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed Make- Luker LLTS1 or equivalent in make as mentioned at makes list in PS

S&F in replacement Decorative wall mounting brushed nickel fixture suitable for B22 base bulb upto 14 watt including 01x10 W LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make:Haalonix Catpart No.HLWB-01-B22 or equivalent in make as mentioned at makes list in PS

S&F in replacement 1x10 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified . Make - Luker Cat part no. LBKRDSL10/Havells INTEGRANEOSURFA CEDLS10WLED857S/Philips or equivalent in make as mentioned at makes list in PS

S&F in repairs Electronic driver suitable for 30 watts LED building security light fittings as per existing make complete all as specified and directed

S&F in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make: Luker Cat Part: LPS40/ Havells Pluto or equivalent in make as mentioned at makes list in PS

S&F in repalcement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. Make: Luker cat part no. LDR20 or equivalent in make as mentioned at makes list in PS

S&F in repalcement Picture light LED (warm white) fitting of 1x12 Watt individual LED lenses bronze coloured. complete all as specified and directed. Make: Philips PHILIPS 919216000000 12W Picture Light, Bronzeor equivalent in make as mentioned at makes list in PS

S&F in repalcement LED high glow bulb 5 watt, Warm White in colour of base E27 complete all as specified and directed. Make: Havells/Crompton/Luker or equivalent in make as mentioned at makes list in PS

S&F in repalcement LED high glow bulb 5 watt, Warm White in colour of base E14 complete all as specified and directed. Make: Havells/Crompton/Luker or equivalent in make as mentioned at makes list in PS

S&F in repalcement LED high glow bulb 5 watt, Warm White in colour of base B22 complete all as specified and directed. Make: Havells/Crompton/Luker or equivalent in make as mentioned at makes list in PS

S&F in repalcement Electronic driver for 20 watts Ceiling lights as per the existing make complete all as specified and directed

S& F in repalcement PVC unbreakable surface boxes of size 4x4.complete all as specified and directed.

S& F in repalcement PVC unbreakable surface boxes of size 6x6. complete all as specified and directed.

S& F in repalcement PVC unbreakable surface boxes of size 4x7. complete all as specified and directed.

S& F in repalcement PVC unbreakable surface boxes of size 6x8. complete all as specified and directed.

S& F in repalcement PVC unbreakable surface boxes of size 8x10. complete all as specified and directed.

S&F in replacement for white cover plate with frame 1 or 2 module.complete all as specified and directed.

S&F in replacement for white cover plate with frame 3 module.complete all as specified and directed. Make:As per the sample given

S&F in replacement for white cover plate with frame 4 module.complete all as specified and directed. Make:As per the sample given

S&F in replacement for white cover plate with frame 6 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 8 modulecomplete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 12 module complete all as specified and directed. .Make:As per the sample given

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module.complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module.complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module.complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and directed. .

Taking down carefully and refixing geyser of any size/make with necessary fastners/clamps and making good any disturbed surface complete all as specified and directed

Disconnecting and taking down existing userviceable geyser of 25 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complete all as directed Note : Parts required for replacement shall be measured and paid separately under respective supply only items

(a) Supply only thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity.

(b) Supply only thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity.

(c) Supply only heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge

S&F in replacement thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed. .

S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed. .

S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided complete all as specified and directed.

S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket.complete all as specified and directed.

S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

S&F in replacement neon lamp indicator square/round type complete all as specified and directed.

S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed.

S & F in repair of Solar Water Heating System Flat Plate Collector type, size : (2.0 x 1.0) Mtr based on direct transfer of heat of capacity 100 Ltrs Per day with suitable electric backup of 2 KW complete complete all as specified and directed. Make : Skylark Thermal Energy System or equivalent

M&L for cleaning the hot water insulated tank of 100 ltrs capacity of Solar Water Heating System Flat Plate Collector Type by removing the sludge /foreign material from the tank and recifying the fault of water leakages complete all as directed.

M&L for cleaning the Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the mud/algee/foreign materials from the panel on half yearly basis complete all as specified and directed. Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt.

Supply and install in replacement of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr, suitable /compatible to existing system complete all as specified and directed. Make : Skylark Thermal Energy System as OEM

S&F in replacement of composite PEX-AL-PEX pipes as per ASTM F 128-2017 of size inner dia 15 mm and outer dia 20 mm, suitable/compatible to existing system complete all as specified and directed. Make : Kitec or its equivalent.

S&F in replacement of CPVC pipes of size outer dia 16 mm with all standard fittings such as suitable size of MS clamps, screws, hooks, Elbow, bends, tees etc complete all as specified and directed. .

S&F in replacement of heating element of 3 KW capacity duly ISI marked, 1-ph, 240 volts suitable/compatible to existing solar heating system complete all as specified and directed.

S&F in replacement Brass/Gun Metal Butterfly gate valve of 15 mm dia, ISI marked, suitable/compatible to extisting system complete all as specified and directed.

S & F in replacement of SS pipe flange of 15 mm dia or suitable/compatible to existing solar Flat plate collector system including suitable size of nut bolts and washers etc complete all as specified and directed.

M&L in replacement of for Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the existing broken glass and cleaning before installing new complete all as specified and directed. . Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt.

S&F in replacement of 15mm bore bib taps, fancy type, cast chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in replacement of rubber gaskets 15 mm dia or suitable/compatible to existing solar Flat plate collector system complete all as specified and directed.

M&L for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion. including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for complete removal of existing treatment from wall to make the surface free from dust, loose paint and loose plaster by scrapping manually as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.

M & L avg 1mm thick wall care putty on wall/ceilling in patch and prepare the surface even and smooth upto desired finishes complete all as specified and directed

M&L for preparation of suraces and applying two coats of distemper oil emulsion over a coat of primer including cleaning the spilled colour on the floor/skirting complete all as specified and directed

M & L for prepration of old treated surfaces and cleaning with scraping, applying one coat of Exterior weather (apex ) paint including cleaning the spilled colour on the floor/skirting complete all as specified and directed

M&L for complete removal of existing treatment like distemper, cement base paint, white wash, painted surfaces on wall/Ceiling, applying 1mm thick brila wall care putty and two coats of Luster paint on wall/ceiling surfaces incl preperation of surfaces including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for prepration of old treated surfaces and cleaning with scraping, applying one coat of Luster paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of old decorated surfaces and applying one coat of oil bound distemper on ceiling including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of plastered/unplastered old surfaces of wall & applying one coat of dry distemper ncluding cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of old painted asbestoes cement ceiling surfaces and applying one coat of synthetic enamel paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparing plastered old surfaces of wall by washing down & applying one coat of cement base paint complete all as specified

M&L for preparing plastered old surfaces of wall by complete removal of existing treatment from wall to make the surface free from dust, loose paint and loose plaster by scrapping manuallyand applying two coat of cement paint complete all as specified and directed.

M&L for preparing old painted wood or wood based surfaces exc 10 cm girth by washing down & applying one coat of synthetic enamel paint. including cleaning the spilled colour on the floor/skirting complete all as spd and as directed

Ditto all as per item No. 147 above but n.exc 10 cm width or girth.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down surfaces exc 10 cm width or girth & applying one coat of synthetic enamel paint including cleaning the spilled colour on the floor/skirting complete all as spd and as directed.

Ditto all as per item No. 149 above but n.exc 10 cm width or girth.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down and scrapping the surfaces exc 10 cm width or girth & applying one coat of aluminum paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down the surfaces n. exc 10 cm width or girth & applying one coat of aluminum paint complete all as specifiecd.

M&L for preparing old painted surface of wall and applying one coat of synthetic enamel paint over the same complete all as directed.

M&L for providing french polish on previously polished wooden surfaces of any description exc 10 cm width or girth incl cleaning & preparing the surfaces incl a coat of wood filler & applying one or more coats on old surface till the desired finish is obtained including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

Ditto all as item No. 154 above but n. exc 10 cm in width or girth.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with syntheitic enamel paint complete all as specified and directed.

Dismantling of singel layer mangalor pattern tiles in roofing complete all as specified and directed.

M&L for providing roof tiles Mangalore pattern interlocking at side joints, laid dry in patches where required complete all as specified and directed

Ditto all as per item No. 158 above but except tiles

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) complete all as specified and directed

Ditto all as per item No 160 above but except ridge tiles

Dismantling of battans for tiles of any size including tilting fillets spacing exc. 15 cm complete all as specified and directed.

M&L for second class hard wood clean sawn battens at 30 cm centre, sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.

Ditto all as per item No.163 above but except battens

M&L in repairs for second class hard wood plain fillets section exc 13 Sqcm and b not exc 25 Sqcm ,square,rectungular or tringular in section ,clean sawn ,secured with nails or brads for unframed work complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work

M&L for IInd class hard wood in scantling exc 40 Scm in area clean sawn for unframed work complete all as specified and directed.

Fixing only for IInd class hard wood in scantling clean sawn for unframed work complete all as specified and directed. Note: wood obtained from item No.166 shall be be used under this item

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for second class hardwood 20 to 25 mm thick weather boarding clean sawn, rebated on thick edge to give 20 mm laps and fixed, complete all as specified and directed

Ditto all as per item No 170 above but except boarding Note: wood obtained from item 170 shall be be used under this item

M&L two coats of synthetic enamel painting to wooden surfaces over one coat of pink primer and including preparation of new surfaces complete all as specified and directed .

M&L Non skid ceramic coloured tiles in flooring 7 to 8 mm thick area of each tile exceeding 0.06 sqm and not exc 0.11 sqm (300x300mm) with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15mm thick cement screed bed in CM 1:6 complete.in patchwork n exc 3.00 Sqm each patch including dismentling of wall tile and floor tile complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 200 X300X7mm/450X300X7 mm / 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match colour of tiles over with 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry as a backing coat all as specified in patchwork n exc 3.00 Sqm each patch including dismentling of wall tile and floor tile complete all as specified and as directed.

M&L in repair for false ceiling 5 mm thick PVC panels (coloured/ designed) i pattern as per approved by Engr-in-charge and including GI grid frame work consisting grid & GI main tee 32 x 24 mm, cross tee 25 x 24 mm and angle of walls of size 20 x 20 mm all made out of 0.50 mm GI sheet size if grid not less than 600 x 600 mm hung from ceiling using 2 mm GI wire suspendors spacers at 1.2 mtr c/c on main runners including making nitches for light, fan decorative/concealed light fittings and fasteners if required complete all as specified directed.

Removal of old building material/ concrete/ concrete block/stone beyond the lead included in the rates, including loading, and stacking at the destination to a distance exc. 5.00 km.out side of MOD land complete all as specified and directed Note : One metric tonne of respective material shall be considered as ‘one load’.

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes.

Ditto all as per item No. 177 above but 20mm dia pipes.

S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe complete all as specified and directed

S&F galvanised mild steel medium grade tubes 20mm dia bore with all fittings and fixed to wall, floors etc complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe complete all as specified and directed

S&F unplasticised PVC pipes if pressure rating 10kgf/cm fixed complete to wall, ceiling or in floor etc., pipe size 15mm complete all as specified and directed

S&F unplasticised PVC pipes if pressure rating 10kgf/cm fixed complete to wall, ceiling or in floor etc., pipe size 20mm complete all as specified and directed

S&F in repair Anodised aluminium door/window/Ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed

S & F in repair PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete all as specified and directed

S & F in repair for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia. complete all as specified and directed

S & F in repair 32mm dia waste coupling of PTMT (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and directed

S & F in repair 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S & F in repair brass chromium plated shower rose 125mm size complete all as specified and directed

S & F in repair plastic water closet seat, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

Bharekar Construction

S G Enterprises