for Electrification work in Extended Nagar Panchayat under EE,EDD BBK 1st , Barabanki

Amount

Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work.

PCC Pole /STP Pole 8.5/11/13 Mtr long

11kv Pin Insulator .

11kv Disc Insulator .

11kv X-ARM

MS Earthing Rod

Transformer 250 KVA

ABC Cable 3x95 SQ. MM.

11 KV XPLE Cable

LT XPLE/Pvc Cable

ACSR Weasal Conductor

Stay Set Complete

Other Line Material

Dragging of pole from JE Dump Store to site

Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle and stay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting.

Stringing and sagging of 11 KV line with ACSR Weasal Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department)

Pipe Earthing ( Boring type)

Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting of copper L-Pieces, provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor)

Munting of 250 KVA Tranformer

Errection of Substation type double pole with PCC Pole 8.5 Mtr. Long including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM.

Errection of single PCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm.

Stringing and Sagging of LT 3x95 ABC Cable (LT ABC Cable will be provided by the department)

Earthing of pole with MS Earthing.

Provinding & Fixing of various type materials. All materials shall be supplied by the contractor.

Nut & Bolt

Different size of lug

LT Armord PVC Cable 3.5x95 sqmm 4 wire

Clamp for Top/ Dropper and T-off Channel etc.

GI Pipe 3"&4'' DIA

Top Channel 11 kv

T-off Channel 11 kv

Sub-Station Base Angle

Gaurding Channel With Gaurding

Dead End Clamp with J-Hook

Suspension Clamp

Peircing Connectores /Clamp

G I TPMO Set

D O Fuse Set

STP TOPLIT F-Braket

L T Clamp with nut &bolt

L T Insulator

Brancing Angie

Concreating and pilinthing of ST& PCC Pole 18x24 CM.

Laying of 11kv XLPE Cable 3x70, 120,185 Sq. By Manually

Laying of LT XLPE/Pvc Cable 3.5x70, 120,185,240,400. Sq. By Manually

Testing of XLPE Cable all size.

Hosting of Cable all size.

Fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc.

Looping of cable and mounting of pole.

Construction of retaining wall, fabrication & erection of Wiremesh fancing of size 5+3 & 2.0 M height around Transformer and with retaining wall & 1 no. gatewith locking arrangement made of MS Angle iron of size 50×50×6 mm jointed with nuts and bolts. The panel must be supported with MS Glat of size 50×6 mm. Wirremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Construction of masonry type transformer plinth of size 2×2×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×2000 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor)

Tapping for Existing 11 KV & LT Line From Extention Area. All Material T&P and Labour Provided by Contractor.

M/S J P CONSTRACTION COMPANY

M/S ASHOK KUMAR CONTRACTOR