SPL REPAIR TO BLDG NO T-09/52 T-30/52 T-31/52 T-32/52 T-33/52 T-36/52 T-45/52 T-24/52 T-117 T-119 T-127 T-136 T-144 AND T-151 UNDER GE (WEST) DELHI CANTT-10

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, incl wooden / metal fillets & grid, complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor tiles, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

All as per item No. 7 above but n. exc 1.5 sq. m each complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coated (150GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coated (150GSM) GI based machine moulded profile ridge/corrugated steel sheet ridge 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as specified and as directed.

M&L for brick work with sub class 'B' old size bricks in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates in roof parapet coping, roof kerb or mud slops and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling couse of sub base complete all as specified and as directed.

M&L for 15 mm thick screed bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non-skid Ceramic coloured tiles in floor 600x600x8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 300x300x7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 10mm thick rendering on wall in CM 1:4 as backing coat of skirtingcomplete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x450x7 thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for rendering 12-15 mm thick ready mixed plaster on any type brick work or concrete surfaces complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on brick work or concrete surfaces other than fair face finished even and fair complete all as specified and as directed.

M&L for providing 1mm thick wall care putty on wall surface complete all as specified and as directed.

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified and as directed.

M&L for preparing new surface of wall and applying two coat of oil bound distemper complete all as specified and as directed.

Preparing surface by complete removal of existing treatment of wall any layer incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

M&L for applying three coats of white wash on wall surface after preparation of surfaces complete all as specified and as directed.

Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window ot other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR park 2 ser No 08110A complete all as specified and as directed.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative laminated type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part-2 ser No 08105C, complete all as specified and as directed.

S&F Factory made 35 mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as spd & directed .

S&F factory made 35 mm thick 2nd class hard wood glazed / gauged shutters, open, rebated prepared to receive glass , guage etc W/O sash bars for doors as specified in SSR Part I complete all as specified and as directed.

S&F stainless steel butt hinges 100mm size complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section of size 150 mm complete all as specified and as directed.

S&F aluminum handles cast type anodised of size 150 mm complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for powder coated (powder coating not less than 50 micron) Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing all around etc complete all as specified and directed. (note : measured only aluminium part as per SSR part-1) complete all as specified and as directed.

S&F powder coated (powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as specified and as directed.

M&L for preparation of old steel surface and applying two coat of synthetic enamel paint on roof truss surface and similar work complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade ST 240 complete all as specified and as directed.

Dismantling Water tanks exc 500 but not exceeding 1000 Ltr capacity and removing to store complete all as specified and as directed.

M&L for 1000Ltr capacity Rotational moulded polyethylene water storage tanks tripple layers white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified including all necessary tank connection and cover,reducer, 25mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete all as specified and as directed.

M&L cast iron floor trap 100mm outlet diameter with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L salt glazed stone ware gully traps 150x150mm , square mouth "P" type complete all as specified and as directed.

S&F 100 mm bore dia Cast iron cowls complete all as specified and directed.

S&F 100 mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F Cast iron Single 'Y' junctions laid and jointed, for 100mm dia pipe complete all as specified and as directed.

S&F for 100mm bore dia cast iron Branch pieces , single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and as directed.

S&F in repair 15mm dia cast copper alloy, chromium plated Health faucet body with 1.25mtr ABS body pipe complete all as specified and as directed.

S&F Grating doom 100/125mm dia of SS (Minimum weight 25gms) complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts complete length 600 mm complete all as specified and as directed.

S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and as directed.

S&F for 4mm GI Wire sutable for holding of net masquto incluing fixing to wall with anchore bolt and MS plate upto 4 story of building complete all as specified and as directed. (Note :- Anchore bolt and MS plate measured in repective item).

S&F MS plates, anchor bolt, angle cleats or other plates, conforming to Fe 290 grade E-165 complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for Pre-polished machine pressed Chequered cement concrete tiles glossy finish 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size incl making necessary connection to water supply pipeline, including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repair vitreous chinaware wash hand basin (WHB), white, size 550x400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as specified and as directed.

S & F 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and as directed.

S & F 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair 15mm dia chromium plated fancy type Bib taps long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15mm bore dia pipe stope valve chromium plated fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup (concealed type) complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection incl cleaning or removal from the site of work complete all as specified and as directed.

All as per item above but 20mm dia.

M&L 20 mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets,stops, rollers etc complete all as specified and as directed.

S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and as directed.

S&F in repair coated MS drapery rod's brackets as required complete all as specified and directed complete all as specified and as directed.

M&L for impregnating cream for injection into masonary or concrete wall 230mm thick against capilary rising humidity, rising bar super strong (Product No 201) of chowgale building chemicals or equivalent in pidilite/Dr Fixit/Sika/Phosrock complete all as specified and directed. Method of application:Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debrish, or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3cm. All sharp edge/joints need to be levelled, loose concrete to be removed. (d) Drill boreholes at ground level horizontally, The boreholes are drilled horizontal into the masonary at the distance of 100mm centre to centre.

Material & Labour for applying and finishing walls plastered /rough cast/brick wall surface with two or more coats of premium Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer complete all as spd & directed.

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing complete all as specified and as directed.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit complete all as specified and as directed. for the following :-

One light/fan/Exhaust fan/bell point controlled by one switch.

All as per item No. 87.00 here in before but for One 5 Amp socket out let independent.

All as per item No. 87.00 here in before but for One 5 Amp socket out let on same board

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 4 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of syenthetic enamelled black paint with new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board complete all as specified and as directed.

S&F switch Piano flush type SP, one way 5 Amps complete all as specified and directed.

S&F switch Piano flush type SP, one way 15 Amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps. complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type complete all as specified and directed.

S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed.

Supply and fixing LED FLAT PANAL Aesthetically designed 2x2 feet for surface mounting which provides soft-light and glare free symmetrical illumination not less than 34 W complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of MCCB 125 Amp 4 pole 16 KA at 415 V with adjustible thermal megnatic release complete all as specified directed.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F single pole MCB 6 to 32Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.

S&F of SPN 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

S&F of Hot water storage (Geyser) 25 Ltrs capacity,BEE 5 star rated,vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar presuure, having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element complete all as specified and as directed.

S&F Exhaust fan metallic type ventilating single phase 230/240V of 300 mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and as directed.

Taking down existing ceiling fan and deposit to MES store Yard.

Supply, Installation, testing and commissioning of 1200 mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply laying testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminum stranded aluminium conductor 1100 volt grade crosssectional area 25 Sqmm 2 core LT cable complete all as specified and as directed.

L G BUILDERS (BID ID -3091650)

M/s Verma and Co (BID ID -3076310)

Shivom Projects Private limited (BID ID -3091736)

M/S Rohit Enterprises (BID ID -3091730)

MAA SANTOSHI ENTERPRISES (BID ID -3085441)

JYOTI ENTERPRISES (BID ID -3084685)

M/S Yamin (BID ID -3077410)

CHOPRA BUILDERS (BID ID -3091608)

GLIBS CONSTRUCTION (BID ID -3091627)

The new hut furnitures (BID ID -3091634)