REPAIR TO FENCING GATE AND COMPOUND WALL AT OMQ AND SMQ AREA AT 25 ED DEOLALI

Amount

Demolition of brick work or stone/boulders Masonry built in cement mortar or cement lime mortar including all quions, arches, pillars, ect but excluding ashlar facings dressed stone work and precast concrete articles.

Material & Labour for brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius built in CM 1:4 etc complete all as specified and directed.

Material & Labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed.

Material & Labour for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Material & Labour for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Preparing new plastered surfaces and applying Two coats of cement base paint over primer on surfaces of walls.

Material and Labour for preparation of old decorated surfacees of wall by washing, rubbing down and stoping of painted surfaces and applying one coat of cement base paint complete all as directed.

Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed.

Dismantling fencing wire mesh, any type etc complete all as specified and directed .

Dismantling post or struts (wood, steel or RCC) any section incl. taking out embedded portion and making good disturbed ground posts embedded in concrete, brick work etc.

Earth work excavation in post holes ( or similar holes) in hard/dense soil ,each not exceeding 0.50 Cum ,getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm ,watering and removing surplus soil.

Removing excavated soil/ building material/debries to a distance exc 250 mtr but not exceeding 500 mtr and depositing where directed etc complete all as specified and directed .

Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded aggregates) as in foundation and mass concrete etc complete all as specified and directed.

Supply and Fix Framed mild steel work as in posts/ struts in fencing including cutting tops to shape, drilling holes,bolting,rivetting flat etc. complete conforming to Fe-290 gde E165

Supply and Fix Framed mild steel work as in gates including pintel hinges, stops, hand made sliding bolts etc. complete conforming to Fe-410-0 or Fe-310-0.

Supply and Fix 10 mm dia Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 5 and not exc 10 cm long.

Supply and fix 10mm dia MS bars as in strainers for chain link fencing including necessasary welding and fixing to angle iron complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts etc.

Supply only Chain link MS galvanised fencing , any size or type.

Supply and fix in repair galvanised 2 strand steel barbed wire 2 mm dia barbed with 2.3 mm dia barbs at 75 to 80 mm spacing and straining, fixed to fencing post tieing at crossing with and including galvanised mild steel wire complete all as directed.

Restringing and resecuring of existing barbed wire incl. making good staples added fixed in repairs etc.

Supply and Fix framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railing grame work of wastertanks and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and as directed

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

One coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed.

Taking down and refixing of steel sliding hanger door shutter of any size complete all as specified.

Material and labour 1.6mm thick mild steel, plain black sheet in door shutter, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including sheet welding in frame, bending or turning up, mitred angles, etc. as required.

Material and labour for mild steel roller of existing size approx 10 cm to 14 cm dia including bearing and welding to angle iron door frame and neessary flat iron clamps bolts, necessary greasing and oiling complete all as specified and directed.

Dismantling wall and ceiling board of any description any thickness , including cover fillets.

Supply and fix for Aluminium composite panel cladding on external façade with water tight system either curved or straight on concrete / masonry surfaces, Size of panel will be as approved by GE. The panel aluminium composite panel shall be of 4mm thick with combination of aluminium skin material of 0.5mm thick aluminium sheet of alloy grade 3105 H 14 cover material natural polyethylene aluminium cladding panel coated on external side with PVDF (Poly vinyledene fluride) of KYNAR PVDF coating containing 70% KYNAR 500 resins for anti fungal & anti bacterial properties and the central core should be with opaque white polyethylene virgin grade , UV stabilized with a combination of 70% LDPE grade 22 FA 002 and 30% HDPE grade E5201 and the core should be bonded to the aluminium skip on both sides with DUPONT adhesive film of 30 to 50 of approved colour/shade fixed with extruded aluminium basis frame (50x25x1.50mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable chemical/anchor bolts on structural steel work including necessary accessories complete in all respects, the surface protection with 80 microns self adhesive peel off film with two layers of white and black tested to withstand for 45 days exposure to local weather condition, without loosing the original peel off characteristic or causing stains or other demages with silicon sealent of sil proof NB/Weeker El 305 or Dowcorning 789 or Wacker EL 305 or GE etc, including all scaffolding and structural steel backup frame as per manufacturers instructions.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and labour granite (of any type and any colour) work (table rubbed & polished), 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finish.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Material and labour for 10mm thick SBR Latex mixed mortar rendering in ratio (1:2:3) (SBR:wtaer:cement) for replacing the damaged part of concrete grinding existing concrete surface cleaning with wire brush removing oil laitance if present ,filling the hole and uneven surface. The item including cost toward all complete application of manufaturer specification.

Note : The amount against Schedule of Credit on Page No. 25 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

Vinod Enterprises (BID ID -3453436)

N.U. MIRZA (BID ID -3453024)

MAHIMA CONSTRUCTION (BID ID -3452131)

M/S KANNANS (BID ID -3451958)

M/S R.K.S. CONSTRUCTION (BID ID -3458169)

Bidder Name

M/S KANNANS

MAHIMA CONSTRUCTION

Vinod Enterprises

N.U. MIRZA

M/S R.K.S. CONSTRUCTION

M/S Nilesh Enterprises