CONSTRUCTION OF TOWNHALL

Amount

CIVIL WORK

Providing & Fixing Red sand Stone Chhatri

Solid fire rated steel doors are made up of 1mm thick GI sheet, BS-476 part 20-22 (1987) IS 3614 Part-2 1992 Door leaf 45 (+-1) mm thick and door frame of 1.5mm thick GI sheet, with Rockwool (Density 96 kg/m3) as infill material with Polyester Powder Coating of 60 to 80 microns (Max Jamb of frame will be 100x55mm and frame construction will be of single rabate. All doors shall be factory prepared and with necessary reinforcement for Hinges, Lock, Door closer and all the eages interlocked. (including all hardware, fixing, fire rated clear glass of 200 x 300mm, flush bolt, anchor fastner of Hilti make) including fixing and supply. Make - Ozone, Saint Gobain or Equivalent) - Single leaf Fire Shaft Door (0.6 x 2m)

Solid fire rated steel doors are made up of 1mm thick GI sheet, BS-476 part 20-22 (1987) IS 3614 Part-2 1992 Door leaf 45 (+-1) mm thick and door frame of 1.5mm thick GI sheet, with Rockwool (Density 96 kg/m3) as infill material with Polyester Powder Coating of 60 to 80 microns (Max Jamb of frame will be 100x55mm and frame construction will be of single rabate. All doors shall be factory prepared and with necessary reinforcement for Hinges, Lock, Door closer and all the eages interlocked. (including all hardware, fixing, fire rated clear glass of 200 x 300mm, flush bolt, anchor fastner of Hilti make) including fixing and supply. Make - Ozone, Saint Gobain or Equivalent) - Double leaf Fire Door (2.1 x 2.4m)

Providing and fixing to existing door frames 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm ± 0.2 mm with inbuilt decorative moulding edging on one side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing of openable uPVC Doors with or without fix top: Frame Made of Extruded uPVC Window Profile Section of size 60w x 70h mm having outer wall thickness of 2.75mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick GI section. All the corners shall be mitered cut & thermal welded so as to form door frame. Fix Mullion made of 60w x 80h mm uPVC Profile Section with steel reinforcement shall be provided for the top fix portion of the doors or in case of the doors having more than two openable shutters, as per the requirement / drawing. Frame of openable door shall have „O‟ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Shutter : The shutters of openable door shall be made of 60w x 95h mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.75mm (+/- 0.2mm) provided with reinforcement of 2.0 mm thick GI section duly mitered cut & thermal welded at all corners, provided with center mullion (if specified in drawing) of size 60w x 80h mm uPVC Profile Section and fitted with uPVC glazing bead of size 36 x 20mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware: Each openable door shutters is to be fixed with three load beading butt hinges and locking of doors is to be provided with multi-point transmission gear (ESPAG) with white finish powder- coated lockable handle. Installation at site: Complete door is to be installed on site with 10 X 100mm fastners with white cap in existing prefinished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and door frame. Complete in all respect as per the drawing and specification and direction of engineer-in-charge.

Providing and fixing of uPVC casement fixed windows or ventilators manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have „O‟ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with „K‟ & „O‟ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass.All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height &

Providing and fixing of UPVC casement openable windows (outward / inward): Outer Frame made from the Extruded UPVC Windows profile section of size 60w X 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber constuction, White in finish, duly reinforced with 1.5mm thick GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 60w X 80h mm UPVC profile section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. Frame shall have co-extruded with EPDM/TPE-E gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Shutter: The shutter of outward openable window shall be made of size 60w X 74h mm and shutter of inward openable window shall be made of size 60w x 77h mm Extruded 3 box multi-chamber UPVC Window profile section of white colour

Providing and fixing Toughened glass 12mm thickness including supply of all material, labour, T&P, etc. required for proper completition of work as per direction of Enginner-In-Charge.

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

SITE DEVELOPMENT WORK

Providing and fixing of uPVC casement fixed windows or ventilators manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have „O‟ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with „K‟ & „O‟ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass.All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height &

SUB HEAD - INTERIOR WORK

Providing and fixing of upholstered rana chairs, centre-to-centre 535-550mm Approx. & back-to-back 950-1000mm Approx. (as per site condition) having flexi back mechanism with complete powder coated framework and with inherently fire retardant fabric complete with all accessories and fixing with four number anchor fasteners of Hilti/Fischer make. Seating to be fixed as per layout in design drawing. Complete as per specifications, Sample Chair needs to be approved for type, comfort and fabric color prior to supply by the Acoustic Consultant and the client. All material to be approved by the Acoustic Consultant/Architect prior to installation.

Fabric Wrapped Panel 595x595x10mm, Square edge (T15 Grid system) -- Hall and below balcony false ceiling

Supply and Installation of Gattone Fabric Wrapped square edge Panel, panels of size 595x595x10mm, density 200kgs/m3, which is suspended by using 0.3mm thick gattone T15 metal grid system.

T15 metal grid system of 600x600mm module includes wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally crossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CrossT in direction parallel to the Main T15 to result in 600x600mm module. Gattone fabric wrapped panel of size 595x595x10mm shall be placed into the grid size of 600x600mm.

The system is backlined with the acoustical polyester 50/1000 kgs/m3

Technical Parameters

• Fire (Class) – ASTM E84 CLASS A • Acoustics – NRC 0.9 • Thermal conductivity (W/mk)– na • VOC Emission- ASTM D5116 Rate:<0.2mg/m2/hr(7 Days) • Light reflectance (%) – 35% • Green - Asbestos-free,non-toxic and tasteless gas under extreme temperature

Wood Fibre Tile 1195x595x15mm, Square edge

Supply and Installation of false ceiling 15 mm thick Mat Black Gattone magnesite bonded panels made with superfine wood fibres & gypsum, were patented with magnesite cement, edge profiles of size1200 x 600 mm laid over MS Suspension Grid consisting of 2 nos 40 X 40X 5mm MS Angles and TEE welded back to back one side @1200mm c/c & other side @ 600mm c/c .

MS grid system of 1200x600mm module includes wall angle with flanges of 40mm, length 3000mm, fixed along the perimeter of walls with the help of suitable fasteners at 300mm centers. Then suspend the MainT with flange width 40mm, height 40mm and length as per requirement from the soffit slab with help of neccessory screw or fabrication and 35x5mm flat with leveling at 1200mm centres. CrossT with flange width 40mm, height 40mm and length 1200mm is interlocked with fabrication at 600mm centers in the perpendicular direction to the Main Tee. Finally CrossT with flange width 40mm, height 40mm and length 600 and 1200mm are join both the direction parallel to the Main Tee to result in 1200x600mm module. Gattone Tile of size 1195x595x15mm shall be placed into the grid size of 1200x600mm.

Technical Parameters

• Fire (Class) – BS 476 PART 5 AND 6 • Acoustics – NRC 0.8 • Water Resistance - IS3308 • Climate (°C, RH) – 60, 90 • Density(kg/m3)- 400 • Wood Fibre- 1mm width with magnesium

Wall Paneling

Panel Size 09mm as per Design, Square edge -- Hall

Supply and Installation of FR grade gattone 9mm thick non wooven composite panel.

The panel of 9mm thick non wooven composite panel by using 12mm thick BWR PLY. GI frame work of 48mm GI Studs using 0.5mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh as per detailed drawing. The frame work to be filled with non wooven polyster wedding(Novofill) of 50mm thick of 1000gsm. After that install the 12mm BWR Ply with help of gypsum screw as per requirement. And fixing of Panel with help of adhesive. Fire Retardant as per ASTM- E84. The product is light weight, with a density of 218 kg/m3. No odor, Formaldehyde free and a smoke development index of 300 by ASTM –E84. Any Undulations in the Walls to taken care by the Interior Acoustics Contractor for proper packing. - NRC upto-0.9

Technical Parameters

• Fire (Class) – ASTM E84 CLASS A • Acoustics – NRC 0.9 • Thermal conductivity (W/mk)– na • VOC Emission- ASTM D5116 Rate:<0.2mg/m2/hr(7 Days) • Light reflectance (%) – 35% • Green - Asbestos-free,non-toxic and tasteless gas under extreme temperature

Envirotech Panel 192x2400x15mm - Wall Lining Hall

Supply and Installation of envirotech Channelled Wood works perforated panels of width 192mm, thickness of 15mm and length 2440 mm or as per site requirement, made of a medium density fibre board with minimum 800 Kg/M3 density substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation alongwith G.I framework of 48mm GI Studs using 0.5mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to be filled with gattone non wooven polyster wedding of 50mm thick of 1000gsm . The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC upto 0.85. The panels shall be mounted on special aluminium splines using clips approved by the client.The contractor should submit shop drawing before execution, if asked by the Engineer. Any Undulations in the Walls to taken care by the Interior Acoustics Contractor for proper packing.

Technical Parameters

• NRC- upto 0.85 • Fire – 1&P • Climate (OC RH) – 50,90 • Termite resistance – Yes • Light reflectance – 85 % • Green (RC %) – 30 • Hygiene (VoC, Clean room) – Low, Class 1

Gattone Panel 600x1200x09mm, - Stage

Supply and Installation of FR grade gattone 9mm thick non wooven composite panel.

The panel of 9mm thick non wooven composite panel by using 12mm thick BWR PLY. GI frame work of 48mm GI Studs using 0.5mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh as per detailed drawing. The frame work to be filled with non wooven polyster wedding(Novofill) of 50mm thick of 500gsm. After that install the 12mm BWR Ply with help of gypsum screw as per requirement. And fixing of Panel with help of adhesive. Fire Retardant as per ASTM- E84. The product is light weight, with a density of 218 kg/m3. No odor, Formaldehyde free and a smoke development index of 300 by ASTM –E84. Any Undulations in the Walls to taken care by the Interior Acoustics Contractor for proper packing. - NRC upto-0.9

Technical Parameters

• Fire (Class) – ASTM E84 CLASS A • Acoustics – NRC 0.8 • Thermal conductivity (W/mk)– na • VOC Emission- ASTM D5116 Rate:<0.2mg/m2/hr(7 Days) • Light reflectance (%) – 35% • Green - Asbestos-free,non-toxic and tasteless gas under extreme temperature

BILL OF QUANTITY - D (AUDIO & STAGE LIGHTING WORK)

SITC of Array Loudspeaker for FOH Left & Right Acoustical specifications, Frequency Response(-3db):LF: 90Hz-4kHz; HF: 900Hz-15kHzMax SPL @1m:LF:131dB/137dB(PEAK); HF:134dB/140dB(PEAK)Dispersion (H x V):LF: 110° x 90°; HF: 90° x 20°, Transducers Compression driver:2 x 3" HFWoofer:2 x 12" LF, Input/Output section, Input Connectors:2 x NL4 @ LF:1+ 2- HF: 3+ 4-Sensitivity (1W @ 1m):LF: 102dB; HF: 110dB, Power section, Total Power:LF: 500W, HF: 100W(RMS); LF: 1000W, HF: 200W(MUSIC); LF: 2000W, HF: 400W(PEAK);Nominal Impedance (Ohm):8Ωired in parallel for IN/THRU use as complete

Supply and fixing of Rigging Hardware/ Bracket: Aluminum array frame for enclosures.

SITC of Subwoofer transducers Low Frequency : Dual 18" Cone transducer, Frequency Range (-10 dB) : 35 Hz - 100 Hz, Amplifier Power Output : 900W Class D continuous, Maximum SPL (@ 1 m) 134dB SPL

SITC of Stage Monitors Transducers :Low Frequency : 12" Cone transducer & High Frequency 1.4 ", Frequency Range (-10 dB) : 45 Hz - 20 kHz, Nominal Coverage Angle : 75° Axisymetric, Amplifier Power Output : Class D 1300W, Maximum SPL (@ 1 m) 130dB SPL, Configuration : Multi-purpose, 2-way powered loudspeaker

SITC of Front Fill Speakers Transducers :Low Frequency : 8" Cone transducer & High Frequency 1.4 ", Frequency Range (-10 dB) : 45 Hz - 20 kHz, Nominal Coverage Angle : 75° Axisymetric, Amplifier Power Output : Class D 1300W, Maximum SPL (@ 1 m) 130dB SPL, Configuration : Multi-purpose, 2-way powered loudspeaker

SITC of Control Room & Green Room Transducers Low Frequency : 4.5" Cone transducer & High Frequency 1 " , Frequency range (-10 dB) : 70 Hz - 20 kHz, Nominal Coverage Angle : 120° Axisymetric Power handling : 50W or more Transfomer tap settings at 100V: 30, 15, 7.5 W and 8Ω bypass Maximum SPL (@ 1 m) 110dB SPL, Configuration : Multi-purpose, 2-way powered loudspeaker

SITC of amplifier Professional Power Amplifier Power(4ohms): 2500W/CH, Power(8ohms): 1500W/CH, Input Sensitivity: 0.775V/1V/32dB Switchable, Frequency Response: 20Hz-20kHz ±2dB, S/N Ratio: >105dB THD (@1kHz): <0.1% @8Ω, 1kHz IMD (@60Hz/7kHz 4:1): <0.5% @8Ω, 60Hz/7kHz 4:1 Damping Factor: >500 @8Ω, 100Hz

SITC of Analog Mixing Console, 32 imput (24 mic/line, 6 line, USB stereo), 16 output, LX7II include frame sizes up to 32 mono inputs and four stereo inputs/returns with four groups, main stereo output and a dedicated mono output for centre clusters. There are direct outputs on the first 16 inputs suitable for multitrack recording, and six auxes for flexibility, effects and foldback

SITC of 12 Analog Inputs (with 48v Phantom Power per Channel), 8 Analog Outputs Configurable Signal Processing, Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus, Clear Front Panel LED Indication Bi-Directional Locate Functionality, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, Soundweb London Interface Kit for Third Party Control System Integration (Documentation), HiQnet Device

SITC of Hand Wireless Microphone, True diversity receiver with metal housing ,External antennas. Automatic frequency management and synchronization via ,remote channel for easy setup Fully tunable over a wide range of UHF frequencies ,Up to 16 compatible channels, Power supply 12 V DC nom. / 300 mA ,AF frequency response 50 to 16,000 Hz (–3 dB)

SITC of Wireless Collar Microphone, Compact Collar microphone for high speech intelligibility and lightweight, bodypack transmitter, True diversity receiver with metal housing External antennas, Automatic frequency management and synchronization,via remote channel for easy setup Fully tunable over a wide range of UHF frequencies , Rackmount kit included Up to 16 compatible channels. Complete set with Receiver, Body Pack Transmitter and collar microphone

SITC of Wired Microphone for General purpose Vocal/Instument with on/off switch

SITC of Microphone Stand Floor/Table Tripod type

Supply and laying of Two core 1.5sqmm speaker wire

Supply and Laying of Two Core shielded Microphone cable

Supply and Laying of Eight Core Microphone Snake Cable

Supply and Fixing of Microphone Connectors Box with 6 Microphone Inputs and 2 Aux

Set of connectors & Patch cables

Supply and Fixing of Equipment rack 30 U with power strip, fan, doors, wheels, drawer for accessoories with lockable facility.

STAGE LIGHTING & STAGE FURNISHING (B)

SITC of 54x3W LED par light complete with 8- channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W RGBW LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle -25° (15°, 45° optional) Function Manual dimming, DMX modes of operation completeetc. as reqd.

SITC of 200W LED Profile light 19 degree with below specifications :- Lamp Power : LED, 200W Power Supply : AC 110-230V, 50Hz Focus : Manual Focus , Beam Angle : 19° , Dimmer : 0-100% linearly adjustable manually focusable, high quality optical system, glass reflector. DMX Control protocol: DMX 512. , CRI : >90 , Dimming : 100 - 0% dimming • Control system : DMX,Auto run and master/slave, Working temp : 30-40 degree Celsius, Protection Rating : IP20 complete etc. as reqd.

SITC of 200W LED PARCAN with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature 3200K Power Rating - IP 20 , Control Manual , DMX, Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz complete etc. as reqd.

SITC of 200W LED Fresnel spot Light with 200mm dia German Lens with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature 3200K ,CRI > 95, spot - Flood Focus adjustment : Mototrised, Beam angle - 10° - 50°Power Rating - IP 20 , Control Manual , DMX0-100% through manual and DMX , Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60Hz complete etc as reqd.

Supply of LED Flasher Bar with power consumption of 100 W or better; Lamp : 18 RGB 10 Watt, Channel : 7 DMX; Control : DMX, Housing CRC sheet metal Holder 2 Nost, 2 mtr 3 core copper wire 3 pin plug top in all respect to approved makes.

Supply of Moving Head/ SHARPY LIGHT 10R, Voltage: 110V~240V/50-60Hz, Ballast: Electronic ballast, Lamp: YODN 280W R10, Color temperature: 8500K, Life Span: 2000H, Colour Wheel: 14 Color + Blank Color Whee

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium or MS material Complete with black powder coating matt black finish.

SITC of Digital Lighting Console with 96 DMX channels, 96 Channels. • 24 Fixtures. 24 Dimmer Control Channels. Time control of scenes: Fade in/out, 12 Faders for Control

Supply and laying of FRLS Copper unarmoured Flexible cable having 3 Core each of 1.5 Sq mm size (In Mtrs)

Supply and laying of FRLS Copper unarmoured Flexible cable having 7 Core each of 1.5 Sq mm size (In Mtrs)

Supply and laying of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal (In Mtrs)

SITC of Set of connectors & Patch cables for entire job

SITC of Main Motorized Curtain made of Velvet curtain (480 to 500 gram in 1 mtrs) cloth with harizontal sliding arrangements complete with fixing railling track, fixing brackets, runner, master runner, 3mm rope wire, 1HP Cropmton motor, drum with groove cutting, pulleys, 2 no air breaker switch (L&T, Siemens, GE make) for reverse & forward, 2 No. air micro switch for auto stop, 2 No push button for open/stop/close position. The curtain should be dropped to half area, when in closed position and minimum overlap at the centre should be 900mm and curtain should be stiched in double gathering cloth. Size (As per site Requirement)

SITC of Rear/Back Motorized Curtain made of glazed cotton cloth with harizontal sliding arrangements complete with fixing railling track, fixing brackets, runner, master runner, 3mm rope wire, 1HP Crompton motor, drum with groove cutting, pulleys, 2 no air breaker switch (L&T, Siemens, GE make) for reverse & forward, 2 No. air micro switch for auto stop, 2 No push button for open/stop/close position. The curtain should be dropped to half area, when in closed position and minimum overlap at the centre should be 900mm and curtain should be stiched in double gathering. Size (As per site requirement)

Providing and fixing of main curtain frill made out of double gathering glazed velvet cloth to be installed above the stage on 28mm dia GI pipe or GI channel.

Providing and fixing of Rear/Back curtain frill made out of double gathering glazed Cotton cloth to be installed above the stage on 28mm dia GI pipe or GI channel.

Providing and fixing of stage wing panel made out of 25 mm x 50 mm of 16 swg MS pipe duly painted in black colour with black glazed casement cloth both side having manual moving facility.

Providing and fixing of Procenium made out from 50x50 mm M.S tube duly painted in black colour & 12 mm ply board, 25mm foam & Velvet/mossi cloth both side fixed on it. Size as per site requirement.

BILL OF QUANTITY - E (AIR CONDITIONING WORK)

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

Fire damper

Actuator

BILL OF QUANTITY - F (ELECTRIC WORK)

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

BILL OF QUANTITY - G (CCTV WORK)

SITC of 2 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.002 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, UL, CE, FCC certified.

SITC of 2 MP IR Fixed Bullet Network Camera -1/2.7″ Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.002 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, UL, CE, FCC certified.

Supply Installation testing and commissioning of 32 Ch Network Video Recorder- Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, atleast one HDMI output with 4K (3840 × 2160), atleast one VGA output with 2K (2560 × 1440) resolution, Support H.265/MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, 1 × eSATA interface, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 10 TB, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, RS-232, RS-485, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. with 30 days backup capacity asrequired.

SITC of professional PC alongwith printer and other accessories as required having minimum i7 processor, 8 GB graphic card 1 Tb SSD as per requirement.

SITC of 42 inch full HD professional LED display for CCTV monitoring.