Dnit for Const. 1 No. RCC Sump well 6 x41 x4, Rising Main Pumping Manhinery for sump at Satnali feeder and all other work contingent therto. Revised Estimate for providing raw water attangment for 5 No. water works i.e. of village Chandeni, Jawa, Bi

Amount

NS Item

Supply & erection of Horizontal spindle split casing type puming sets of minium four star rating duties directly coupled to AC squrrel cage induction type motor with 1440 RPM, 3 Phase, 50 HZ and accessories as descries in Schedule No. II complet in all rspect with priming arrangement with complete base frame. Sump well pump set 2300 LMP 75 Mtrs. head with squirrel cage induction motor 1440 RPM 3 Phase 50 Hz of suitble rating 75.00 HP.

4500 LMP 4 Mtrs. head with squirrel cage induction motor 1440 RPM 3 Phase 50 Hz of suitble rating 70.00 HP.

Supply and fixing following C/I D/F pipe and specials bell mouth including cost of joiniting materials laying jointing in position as per specification given in schdule No. II for pumping machinery CI, D/F pipes (A) 200 mm i/d.

B) 300 mm i/d

Supply, erection, testing and commissionig of wall mounted eletrical panel board, fabricated from 16 SWG CRCP sheet duly stouted with suitable angle iron frame work and completely powder coated of approxinate size 1200x900 mm and 400 mm deep having following items (suitable for 100 BHP motor). 1) For sump well (100 BHP) for 4500 LPM x40 Mtr head. a) Main switch 63 Amp 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB). b) volt meter 100x100 mm range 0 tp 500 volt 1 No. (E/LAPPA/L&T) c) Amp meter 100 x100 range 0 to 100 Amp 2 Nos. (AE.KAPPA. L&T) d) CT 100/3 Nos. (AE/KAppa.L&T) e) VSS & ASS 1 No. each of approved make f) SPP 2 No. approved make g) Motor starter, Star delta 1 No. for 4500x470 mm (Motor L&T simens. ABB) each of approved make h) capacity LVAR as per site requirement I) indicating lamp- one set Chane over switch caacity 2 No.

Supply, erection, testing and commissionig of wall mounted eletrical panel board, fabricated from 16 SWG CRCP sheet duly stouted with suitable angle iron frame work and completely powder coated of approxinate size 1200x900 mm and 400 mm deep having following items (suitable for 100 BHP motor). 1) For sump well (100 BHP) for 4500 LPM x40 Mtr head. a) Main switch 63 Amp 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB). b) volt meter 100x100 mm range 0 tp 500 volt 1 No. (E/LAPPA/L&T) c) Amp meter 100 x100 range 0 to 100 Amp 2 Nos. (AE.KAPPA. L&T) d) CT 100/3 Nos. (AE/KAppa.L&T) e) VSS & ASS 1 No. each of approved make f) SPP 2 No. approved make g) Motor starter, Star delta 1 No. for 4500x470 mm (Motor L&T simens. ABB) each of approved make h) capacity LVAR as per site requirement I) indicating lamp- one set Chane over switch caacity 2 No.

Supply, erection, testing 7 commissioning of 320 KVA laying noise control axothe ustic encloure radiator cooled, 3 phase, 4100 wire, 50 cycle 415+(-) 1% volt AC altemator coupled directly throught a set of flexibel coupling on a common MS dfebricated base frame with diesel Engine The rating should be at 1500 RPM. a) Diesel Engine b) Altermator c) Base plate d) battery 24 V. e) 1x 120 sq mm 3.0 core XLPE Aluminum=20 mm f) Tools AMF Panal a) Motorized change over switch 250 Amp. 4 P with fuse base & HRC links 250 Amp. b) Under voltage/over voltage relay-2 No. -415 VAC c) Engine start relay 24 VDC 1 No. d) Eloectronic Timber 24 VDC 1 No. e) Electronic Timber 24 VDC 2 No. f) Auxciliary relay 220 VAC 2 No. g) Auxiliary relay 220 VAC 3 No. h) Metering sett 415 VAC -1 set (Amp meter, volt meter, ASS, VSS, Phase indicators, control Fuse, Frequency meter, CT's) i) Metering sert 24 VDC (Amp. meter, volt meter) j) Over load protection for DC-1 No. k) battery charger 24 V DC (Blueron make) l) Copper bus bar of suitable size m) K W H meter 96 sq mm size. n) Starting fuse button & Key switch (on / off) o) Engine protection unit with Audiovisual alarm and shut down for low labricating oil pressure & high coolant trmperature. p) Indicaning lamp for low lubricating oil pressure high collant temperature, set runninng, load on, DC control on. Note:- Control panel shall have the provision to

Supply erection testing of ISI marked copper wire 10 sq mm 3 core for 2 Nos. motors with under ground system in PVC and flexible pipes complete all respect with accessories like thimble etc.

Supply erection testing of light fittings including wire in the pump chamber with materail upto 10 points including switch button plug PVC conduit pipe & copper wire etc as per reputed specification . High Pressure.

Bidder Name

Amount

RAJ KUMAR CONT(GSTN-NA)

OM PARKASH CONT(GSTN-NA)

RAJ KUMAR CONT

RAJ KUMAR CONT