ADDN/ALTN/IMPROVEMENT TO CERTAIN OTM ACCN INCLUDING LIVING IN ACCN FOR AIRMEN AT RAMPURHAT UNDER GE (AF) PANAGARH

Amount

NOTE (Applicable for all Parts/ Items):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

SCHEDULE "A" Part - I (BUILDING / STRUCTURE) (Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as 0.00 under column 5 signifies the fact only)

Construction of 01 Block of Single Living in accn for Airmen (Single Storey) building confirguration with permanent specifications including RCC framed structure, Seismic provision for Zone III, Fly ash brickwork, Mosquito proofing, ATT and APP roof treatment complete all as specified and as shown on drawings.

Construction of 01 Block of Air crew Rest Room (Single Storey) building confirguration with permanent specifications including RCC framed structure, Seismic provision for Zone III, Fly ash brickwork, Mosquito proofing, ATT and APP roof treatment complete all as specified and as shown on drawings.

Construction of 01 Block of Det Cdr Room (Single Storey) building confirguration with permanent specifications including RCC framed structure, Seismic provision for Zone III, Fly ash brickwork, Mosquito proofing, ATT and APP roof treatment complete all as specified and as shown on drawings.

Construction of 01 Block of IC Det Cdr Room (Single Storey) building confirguration with permanent specifications including RCC framed structure, Seismic provision for Zone III, Fly ash brickwork, Mosquito proofing, ATT and APP roof treatment complete all as specified and as shown on drawings.

Construction of 01 Block of Air Crew Room and Ground Crew Room (Single Storey) building confirguration with permanent specifications including RCC framed structure, Seismic provision for Zone III, Fly ash brickwork, Mosquito proofing, ATT and APP roof treatment complete all as specified and as shown on drawings.

Construction of Fire shed/Point complete all as specified and as shown on drawings.

Construction of Garbage Bin complete all as specified and as shown on drawings.

SCHEDULE 'A' PART- II ( SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- III (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- V (PATH WORKS/CULVERT) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- VI ( AREA DRAINAGE) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- VII (SEWAGE DISPOSAL ) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- IX (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- X (FENCING) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- XI (ADDN/ALTN/IMPROVEMENT TO BLDGS (B/R PORTION)) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- XII (ADDN/ALTN/IMPROVEMENT TO BLDGS (E/M PORTION)) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART -XIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES.

S&F 15mm bore fancy type chromium plated angle cock , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for Powder coated aluminium decogrill mesh of size 75mm X75 mm x 6mm thick fixed to aluminium frame complete all as specified and as directed by Engineer-in-Charge.

S & F ' in repairs' Vitreous China wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F 'in repairs' grating round 100mm size of stainless steel fixed to floor complete all as specified and directed.

S&F 15mm bore , fancy type chromium plated bib tap two way, cast copper alloy with capstan head long body and cup, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F ' in repair ' 125mm size chromium plated shower roses with 450mm long brass chromium plated shower arm , with or without swivel joints, any size, including fixing to steel pipe or union, complete, all as specified and as directed.

S&F grating round 75mm size of stainless steel fixed to floor complete all as specified and directed.

M & L for aluminium snap grid frame work for false ceiling of suitable size panel with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete as per manufacturer's instructions including fixing of nut, bolt and clamps with the help of drilling machine complete all as specified and as directed

M&L for 8mm tthick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid fixed or laid /inserted to aluminium framework with screws if required all as per manufacturer's instructions complete all as specified and directed.

S & F 100mm size, Butt hinges, stainless steel butt hinge with mild steel hinge pin, complete all as specified and directed.

S&F ' in repair' 20mm dia powder coated aluminium curtain rod, decorative type complete all as specified and as directed.

S&F powder coated aluminium decorative type brackets with ends/stops etc including other accessories for fixing arrangements of 20 mm dia curtain rod to wall ,complete all as specified and as directed.

S & F LED light fitting 1 x 9/10 watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F ultra slim LED batten 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F bracket made out of galvanised tube 40mm dia bore light grade , 1.50 mtr long and fittings required with MS clamps, nuts and bolts complete all as specified and directed.

S&F 'in repairs' MCB 240 Volts, 50 Hz, SPN, 6-32 Amps, 10 kA with 'C' curve and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F 'in repairs' MCB 240 Volts, 50 Hz, SP, 6-32 Amps, 10 kA with 'C' curve and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F 'in repairs' MCB 240 Volts, 50 Hz, TPN, 63 Amps, 10 kA with 'C' curve , 415 volts and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F epoxy powder coated sheet metal enclosure for DBs double door (When MCBs to be used) SPN 240 Volts, 4 way with mounting fixed with bus bar, DIN Channel, neutal link and incoming contact complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs double door (When MCBs to be used) SPN 240 Volts, 8 way with mounting fixed with bus bar, DIN Channel, neutal link and incoming contact complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs double door (When MCBs to be used) TPN 415 Volts, 4 way with mounting fixed with bus bar, DIN Channel, neutal link and incoming contact complete all as specified and directed.

S&F exhaust fan metallic steel body, single phase, 230 volts, 50 Hzs of size 250mm sweep, 1200 RPM, heavy duty type with suitable metallic louver, blades, frame and flexible three core copper conductor cable of suitable size for connecting with ceiling rose complete including making of hole in wall and making good to the disturbed surface complete all as specified and as directed.

S & F LED street light fitting 25 Watt, 230 V, AC outdoor type, IP-66, with high pressure die cast aluminum hosing and heat resistant toughned glass complete with in-built driver inside the housing, lamp bracket with impact and corrosion resistant complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and GI earth wire of dia 4.00mm as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI earth wire of dia 4.00mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforced with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing light grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) PCC pit (with pit cover) shall be provided at least 500mm away and not on the earth pit itself and cost of additional height of watering pipe, bends, elbow etc shall deemed to be included in the unit rate. (c) Excavation/earthwork is deemed to be included in the quoted rate.]

S & F LED lamp 10 watt fixed to holder complete all as specified and directed.

S & F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.

S & F LED lights fitting, 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED security light fitting of capacity 35 watt with integral reflector made of aluminium alloy LM6 with LED driver, lamp, surge protector and all accessories pre wired including connection with three core PVC insulated, sheathed copper conductor cable of suitable size complete with GI bracket 1.5 meter long bend to shape of dia 40mm GI medium grade pipe with MS clamp /nut & bolts/washers etc complete all as specified and directed.

S&F Energy efficient five star rated ceiling fan 230 volts, single phase AC, 1200 mm sweep, Brushless Direct Current(BLDC) without remote type with accessories like holding down rod,hanging clamps, blades, fan hook including writing MES number (as per standard practice) including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete in all respect all as specified and directed. (Note : Fan regulator shall be provided with BLDC fan as per OEM recommendation)

S&F Energy efficient five star rated ceiling fan 230 volts, single phase AC, 1400 mm sweep, Brushless Direct Current(BLDC) without remote type with accessories like holding down rod,hanging clamps, blades, fan hook including writing MES number (as per standard practice) including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete in all respect all as specified and directed. (Note : Fan regulator shall be provided with BLDC fan as per OEM recommendation)

S&F exhaust fan metallic steel body, single phase, 230 volts, 50 Hzs of size 300mm sweep, 900/950 RPM, heavy duty type with suitable metallic louver, blades, frame and flexible three core copper conductor cable of suitable size for connecting with ceiling rose complete including making of hole in wall and making good to the disturbed surface complete all as specified and as directed.

S&F concealed distribution box, double door, vertical type, TPN, 415V, 4 way or 16 modules, IP 43 suitable for MCB of 100 Amps, 4P, 10 kA as incomer and MCB SP/TP as out going complete with suitable bus bar, neutral link, earth link complete all as specified and directed. Note : (i) MCCB/MCBs shall be measured and paid separately (ii) Blank space shall be covered with blank plates and cost for the same shall be deemed to be included in the quoted rate.

S&F concealed distribution box, double door, SPN, 230V, 12 way, IP 42 with 200 Amps rated bus bar, neutral link, earth link complete all as specified and directed.

S&F concealed distribution box, double door, SPN, 230V, 8 way, IP 42 with 200 Amps rated bus bar, neutral link, earth link complete all as specified and directed.

S&F electric water heater storage type steel body with stainless steel inner tank and heating element upto 1.5/2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, including PVC connection pipe for hot/ cold water to existing water lines,necessary fixing arrangement by using 50 X 5 mm MS plate and writing MES No and paste the instruction sheet of Do’s and DO NOT complete all as specified and as directed.

S&F MCB 230 Volts, 50 Hz, SPN, 40 Amps, 10 kA with 'C' curve complete all as specified and directed.

S&F MCB 230 Volts, 50 Hz, SP, 6-32 Amps, 10 kA with 'C' curve complete all as specified and directed.

S&F MCB 415 Volts, 4 Pole ,63 Amp , 50 Hz, 10 kA with 'C' curve complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No-3 SSR Part -1 2009 connected to earthing test point including earth wire protection pipe of dia 15 mm (light grade), excavation and earth work, disposal of surplus spoil, provn of RCC cover 50 mm thick, reinforced with 8mm dia TMT bars @100 mm /C/C both ways with one handle for lifting made out of 10 mm dia TMT bar embedded in precast RCC (1:2:4) type B1, cover slab of size 54 cm x 54 cm x 5 cm and PCC (1:3:6) type C-1 concrete pit, funnel with watering pipe 20 mm bore (medium grade) testing on completion complete all as specified and directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) PCC pit (with pit cover) shall be provided at least 500mm away and not on the earth pit itself and cost of additional height of watering pipe, bends, elbow etc shall deemed to be included in the unit rate. (c) Excavation/earthwork is deemed to be included in the quoted rate.]

SEWAGE DISPOSAL Construction of Septic tank for 25 Users complete all as specified and directed by Engineer -in-Charge.

Construction of soakage well for 25 users, 1.80 mtr dia with effective depth as shown on drawings complete all as specified and directed by Engineer -in-Charge.

M & L for constrution of valves pit chamber of size (900 mm x 900 mm x 900 mm, internal ) using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick , 23 cm thick wall in CM (1:4), 10 mm thick rendering all around the brick work with 1:4 cement motar ,PCC (1:2:4) type B-1 coping with 20 mm graded agregate for grouting MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement MS frame out of 50 x 50x 6 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer finishing coat including necessary excavation in any type of soil, returing filling in and removal of surplus soil to adistance not exceeding 50 mtrs all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine without damaging the existing road , getting out and disposal of excavated soil to a distance not exc 50 mtr from the site of work complete all as specified and directed.

Supply, laying in trenches fly ash bricks locally available of 230 x 115 x 75mm for cable protection complete all as specified and directed.

M&L Steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 Metre long) including two coats of sky blue enamel paint upto 1.5m from PCC foundation and aluminium paint over rest portion of pole over and including a coat of red oxide primer complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 32mm x 6mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 32mm x 6mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforced with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 15mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. [Note : (a) The unit rate includes for protection pipe and earth lead upto 7.5 m. Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured and paid seperately. (b) PCC pit (with pit cover) shall be provided at least 500mm away and not on the earth pit itself and cost of additional height of watering pipe, bends, elbow etc shall deemed to be included in the unit rate. (c) Excavation/earthwork is deemed to be included in the quoted rate.]

Design, Fabrication, Testing and Commissioning of cubical type LT panel board outdoor type fabricated made out of 3.15mm thick CRCA sheet from CPRI approved manufacturer. The panel shall be front and back operated mounted pedestal of MS angle iron frame using 50 x 50 x 5mm thick. The panel board and each cubical shall have canopy/hood on top. The pedestal shall be embedded in PCC 1:3:6 type C-1 using 20mm graded aggregate 45 cm below ground level and 30 cm above ground level. The panel shall be sufficient cable alley for cable entry and exit. The panel shall be LT aluminium bus bar duly coated with PVC sleeve with colour codding of 200 Amps of suitable size as per IS mounted on porcelain/Mica/resin cast insulator. The panel shall be dust and vermin proof as per IP 65. The spacing between bus bar shall be as per IS. The panel shall be powder coated with seven tank processor. The panel board shall be designed to enclose the following accessories : - (Location - Near Single storied Building) Incoming : (a) Onload Changeover 100 A, 4 pole, Rating -01 No (b) MCCB 100 Amp, 4 Pole, 18 kA -01 No

(ITEM NO 13.49….. Contd.../) Outgoing : (a) MCCB 63 Amp, 4 pole, 18 kA- 01 No (b) MCCB 32 Amp, 4 pole, 10 kA- 01 No (c)Phase Indicator lamp (RYB) LED type - 01 set (d) Digital multi functional meters for measurement current, voltage and frequency including CTs of suitable rating and class -01 No Note :- (a)Quoted rate is inclusive of necessary internal wiring/pre setting of meters, CTs, indication lamps etc and rigid bus bar connections from bus bar to MCCB terminals connection Bus to MCCB/MCB connections. (b) Contractor shall submit general arrangement drawings and details for approval before fabrication of Panel Board

Design, Fabrication, Testing and Commissioning of cubical type LT panel board outdoor type fabricated made out of 3.15mm thick CRCA sheet from CPRI approved manufacturer. The panel shall be front and back operated mounted pedestal of MS angle iron frame using 50 x 50 x 5mm thick. The panel board and each cubical shall have canopy/hood on top. The pedestal shall be embedded in PCC 1:3:6 type C-1 using 20mm graded aggregate 45 cm below ground level and 30 cm above ground level. The panel shall be sufficient cable alley for cable entry and exit. The panel shall be LT aluminium bus bar duly coated with PVC sleeve with colour codding of 200 Amps of suitable size as per IS mounted on porcelain/Mica/resin cast insulator. The panel shall be dust and vermin proof as per IP 65. The spacing between bus bar shall be as per IS. The panel shall be powder coated with seven tank processor. The panel board shall be designed to enclose the following accessories : - (Location - Near Main Feeder Pillar box) Incoming : (a) MCCB 125 Amp, 4 Pole, 25 kA -01 No

(ITEM NO 13.51….. Contd.../) Outgoing : (a) MCCB 100 Amp, 4 pole, 18 kA- 03 Nos (02 outgoing + 01 Outgoing) (b)Phase Indicator lamp (RYB) LED type - 01 set (c) Digital multi functional meters for measurement current, voltage and frequency including CTs of suitable rating and class -01 No Note :- (a)Quoted rate is inclusive of necessary internal wiring/pre setting of meters, CTs, indication lamps etc and rigid bus bar connections from bus bar to MCCB terminals connection Bus to MCCB/MCB connections. (b) Contractor shall submit general arrangement drawings and details for approval before fabrication of Panel Board

M&L in replacement street light bracket 1.5 meter length suitable for LT pole, made out of GI pipe of light grade 32 mm dia size, proper shaped, bent, threaded and drilling holes for wire entry, including MS clamps (02 Nos) of suitable size in proper shape and size complete all as specified and as directed.

S & F LED street light fitting 45 Watt, 230 V, AC outdoor type, IP-66, with high pressure die cast aluminum hosing and heat resistant toughned glass complete with in-built driver inside the housing, lamp bracket with impact and corrosion resistant complete all as specified and as directed.

M&L for Cable Junction Box out door type made of polycarbonate with IP 66 protection (Halogen free and weather proof) for outdoor installations of size 260 x 210 x 116mm including MCB SP 6A, 10 kA 'C' Curvemounted DIN rail gland for cable, FI clamp of size 20 x 3mm , nuts , bolts, washers, provisions of connectors for connections of cables etc complete including taking down of old one all as specified and as directed.

S & F PVC insulated and PVC round sheathed, copper conductor (Flexible) industrial cable 2.5 sqmm, single core copper conductor 2 run and 2.5 sqmm earthing cable in and including through GI tube of light grade of 15mm bore dia for connection for street light on pole /wall from over head conductor/junction box/DB including termination clip etc including taking down of old one complete all as specified and as directed.

Provision of Steel gate of size 5.50 mtr width and 3 mtr height fixed with RCC Pillar of size 600 x 600mm including excavation, returning filling in , removal of surplus soil, PCC plastering,painting/finishes etc all as per drg No AF/TD/244/15 sheet No 1/3 to 3/3 dated 22.07 2015 complete all as specified and as directd by Engineer-in Charge.

Sch 'A' Part-XIV (SCHEDULE OF CREDIT) Note :- Amount of Rs 73,780.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

M/S KUMAR AVINASH

Ganguly Construction