Provn of High Mast Light interim location E Med Regt, Bird Park, Heritage, Bldg and certain revenue / minor works under AGE E/M at Faridkot Mil Stn

Amount

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out including taking out old brick or precast cable cover for reuse complete all as specified and directed by Engineer-in-Charge.

All as per srl item No. 01 here-in-before but depth exceeding 1.5m and not exceeding 3.0m

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning of cross sectional area 25 sqmm, 4 core XLPE insulated screened PVC bedded galvanised steel strip wire, armoured electric cable heavy duty multi stranded aluminium conductor PVC sheathed LT cable 1100 volts grade conforming to IS-1554 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. Note :Excavation, earth work, sand cushioning and brick protection required for item shall be measured and paid separately under respective items of BOQ.

Supply, install, commissioning of 16 metre high 20 sided polygon highmast lighting system fabricated out of BS-EN 10025 or equivalent 355 Mpa material in two sections, hot dip galvanised (single dip) internally & externally having uniform coating thickness of 85/ 65 micron for bottom & top section respectively as per BS 729 and with one longitudinal weld and having no circumferential weld suitable for wind velocity of 180 Km/hr as per IS -875 (Part-3) duly provided with accessories like head frame, steel wire rope 6mm dia (7/19 construction with central core SS) trailing cable double drum winch, galvanised lantern carriage arrangement suitable for 09 luminaires symmetrically and end finial. The mast shall have an integral power tool installed inside the base compartment for its operation as per manufacturers design/ details complete all as specified and directed by Engineer-in-Charge. Make : CG Cat No. HM-1116 A or eqivelant in Philips/Bajaj/Wipro of 16 M height suitable for design condition specified above. Highmast light includes the following :- (i) Supply, and fixing of foundation bolts manufactured from special steel alongwith nuts, washers, anchor plates and templates etc as required as manufacturers recommendations suitable for design life not less than 25 years. (ii) Erection and commissioning of high mast with the help of suitable equipments and wiring of luminaries with all copper conductor, cable of suitable size & providing flexible steel conduit pipe ¾” for protection of cable (iii) Drawing, design and casting of suitable shallow foundation with RCC M-25 mix concrete for high mast considering the safe bearing capacity of soil as 10 tonne/ Sqm at 2.50 metre depth duly approved by GE - 01 Job each (iv) Casting of suitable foundation with RCC M-25 mix concrete for panel as per manufacturers recommendations. (v) Supply and fix LED flood light fitting luminarie 160 W with LED lamp, secondary optics made in pressure die cast housing and heat sink in aluminium extursion type with IP65 protection class Make Bajaj or equivelant in Crompton Greaves/Philips/Surya - 09 Nos each. (vi) Supply and fix integral aviation obstruction light comprising of aluminium housing with polycarbonite enclosures - LED type - 02 Nos Each Make : Bajaj Cat No. BGAV302 LED or equivelant in Crompton Greaves, Philips & GE (vii) Supply and installaton of control panel (KIOSK) (out door, double door) with auto control timer switch unit with digitial time switch of capacity 63 Amps tripple pole & neutral (TP&N) MCB incomer housing suitable for circuit for operation of mast including suitable control circuit for power tool motor complete as per manufacturer recommendations- 01 Jobs Each. (viii) All necessary Excxavation and earthwork in any type of soil including returning, filling and removal of surplus soil to distance not exceeding 50 metre completed all as specified and directed by Engineer-in-Charge. (ix) Contractor shall submit Manufacturer defect guarantee certificate for a period not less than 05 years.

Supply and fix in replacement GI pipe 40mm bore light grade with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps, nuts, bolts and washers complete all as specified and directred by Engineer-in-Charge.

Supply, fixing and testing LED street light fitting of 45 Watt including LED lamps complete with body robust, corrosion, resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP-65 protection as per IS-10322-1982 (Part-I) with latest amendments and input voltage range 140-300V, AC, frequency 50-60 Hz, PF should be more than 0.9 with total harmonic distoration THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fittings should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC. Driver should also have double phase protection, no load, open circuit and short circuit protection. LED light fittings should be suitable for ambient temperature from - 10 degree centrigrade to 50 degree centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/ toughened glass to ensure minimum IP 65 degree protection cover should not degrade due to heating and ageing. The efficient of LED luminaries system shall be more than 85 lumens per watt and must be certified by LM-79 test report complete all as specified and directed by Engineer-in-Charge. Make: Crompton/ Bajaj/ Polycab /Havells/Halonix/Philips Note :- (a) Bidder shall submit rest report of LED street light fitting from accredied test laboratory for LM-79 and LM-80 (b) Bidder has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following cases : - (i) Manufacturing defects, (ii) Failure due to mechanical and electrical impact, (iii) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/ luminairies. (c) All LED lights luminaries must meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/ Section 13 (d) scope of work shall include supply and fixing street light fittings on swan neck swaged tubular poles which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. Note: Every light fitting will be warranty 5 years after completion of CA and replacement/defects as applicable should be complied/rectified within 7 days .

S&F 4 sqmm twin core , 1100 volts grade heavy duty cable, PVC insulated aluminium multistranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed for making connections of street light fittings with overhead lines/UG Cablecomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of street light bracket with clamps, nuts, bolts, washers suitable for LED street light fittings on PCC poles made out of 40mm bore GI light grade pipe, length exc 1 mtr but not exc 1.5 mtr and bent to shape complete all as specified and directed by Engineer-in-Charge.

Supply, fixing and stretching in replacement aluminium conductor steel, reinforced (ACSR) conductor of any size fixed on HT/LT poles fixed on insulators and binding with and including binding wire 14 SWG complete all as specified and directed by Engineer-in-Charge.

S & F pre-stressed cement concrete pole, 9 metre long of cross section 102mm x 172mm at top and 102mm x 279mm at bottom, class 10, complying with requirements of IS-1678-1978 errecting truly in vertical position including painting of poles in alternate strip of 30cm wide each (5 Nos.) in black and white colour upto 1.5 metre height from top of PCC pedestal/coping of poles and numbering of poles with synthetic enamel paint Black in 80mm high letters over 150mm x 230mm yellow base made from synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note :- PCC for foundation, cross arms and earth work shall be measured and paid for separately.

M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for poles, stays & mass concrete including necessary form work and fair finishing complete all as specified and directed by Engineer-in-charge

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of poles etc including weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed by Engineer-in-charge

Supply, fixing and testing LED flood light fitting of 70Watt including LED lamps complete with body robust, corrosion, resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP-65 protection as per IS-10322-1982 (Part-I) with latest amendments and input voltage range 140-300V, AC, frequency 50-60 Hz, PF should be more than 0.9 with total harmonic distoration THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fittings should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC. Driver should also have double phase protection, no load, open circuit and short circuit protection. LED flood light fittings should be suitable for ambient temperature from - 10 degree centrigrade to 50 degree centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/ toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficieny of LED luminaries system shall be more than 85 lumens per watt and must be certified by LM-79 test report complete all as specified and directed by Engineer-in-Charge. Note: (a) Bidder shall submit test report of LED street light fitting from Govt approved accredited test laboratory for LM-79 and LM-80. (b) Bidder has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following cases : - (i) Manufacturing defects, (ii) Failure due to mechanical and electrical impact, (iii) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/ luminairies. (c) All LED light luminaire must meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/ Section 13 (d) scope of work shall include needful T & P and required accessories etc as per manufacturers recommendation complete including making connection, testing etc complete. Note: Every light fitting will be warranty 5 years after completion of CA and replacement/defects as applicable should be complied/rectified within 7 days .

Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core drawing through concealed conduit terminated with steel pressed sunken terminal boxes and 1.5 sqmm PVC stranded copper conductor insulated unseathed stranded (Green colour) connected to common earth point dolly for One light point/ call bell point/fan point to be controlled by one number one way PT switch complete all as specified and directed by Engineer in Charge.

S&F switch piano type single pole one way 5 Amp,230 VAC supply complete all as specified and directed by Engineer in Charge.

M&L for MS clamp fabricated from MS flat of size 50mmx5mm including nuts, bolts, washers, bending cold or hot drilling holes for bolts in any shape or size for holding GI pipe with pole and wall complete all as specified and directed by Engineer in Charge.

M/S RAJESH KUMAR and CO.

DEEPAK ENTERPRISES

M/s Balvinder Singh Engineer and Contractors

Raman Electric Trading Co

GILL ENTERPRISES

V R TRADERS

M/S R P SINGH AND COMPANY