8137 SPECIAL REPAIRS TO LH 13 OF INTERNAL MEDICINE AT AFMC PUNE SPECIAL REPAIRS TO ROOF AT SINGLE LIVING NURSING CADETS ACCN BLOCK A AND BLOCK B AND PROVN OF HARDSTANDING FOR OPEN PARKING AREA NEAR CADET INSTITUTE BOYS HOSTEL AT AFMC UNDER GE CENTRAL

Amount

Demolition of RCC Roofs, floors (other than ground floors), cylinderical / circular water tank and similar suspended work and removal of debris outside of MoD land all as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of debris outside of MoD land.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and removing from site complete all as directed.

Dismantling of floor, hearth or wall tiling of any description incl cement mortar bedding (but not backing),removing unserviceable tiles and rubbish off the premises complete all as directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing from site complete all as directed.

All as per item No 5 here-in-before but exc 1.5 and n exc 4.0 sqm each.

Taking up or down carefully 15mm dia steel tubing and connection including cleaning for refixing or removal from site complete all as directed.

All as per item No 7 here-in-before but 20mm dia.

Surface excavation n.exc (not exeeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Removing of excavated soil n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M & L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with soild blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

S & F solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS square tube and fixing in opening all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F aluminium anodised handles, fabricated type of size 150 mm complete all as specified and directed.

S & F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm complete all as specified and directed.

S & F Aluminium ( die cast ) body Door closer hydraluically regulated designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and weight between 36to 60 kg and fixed complete all as specified and directed.

S & F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock, handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom panel (both side laminated) using following sections as given in 'JINDAL' catlogue all as directed by Engr-in-Charge. (a) Rectangular tube 14005 (b) Vertical rail 19501 (c) Top rail 19503 (d) Middle rail 20060 (e) Bottom rail 19511

S & F aluminum powder coated three track slinding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue. (a) Bottom rail . 20620 (b) Top & Vertical rail. 20621 (c) Handle. 20606 (d) Inter lock 20724 (e) Top & bottom & sides 20844

S&F ventilators / louvers using 5 mm thick x 10 cm wide frosted glass strips inside & stainless steel wire cloth 0.36 mm dia and 1.18 mm width of aperture from outside using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as specified & as directed :- (a) SP- 20048, (b) Glazing clips - 19352

Removing existing old bitumnous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab all as spd and directed.

M & L water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge(a) M & L for 10 mm thick plaster screed bed layer in CM 1:3 on concrete surfaces mixed with and including WPC @ 3% by weight of cement. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminous primer @ 0.40 litres per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.5 Kg/Sqm and 4 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge, Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engr-in-charge.

M & L for gypsum ceiling board for ceiling prepainted, finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners and making niches for fans/light including providing two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for coloured, (Digital) vitrified tiles 600 x 600 x 9 to 10 mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for non skid coloured ceramic tiles (of any colour) flooring 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete over and including 10mm thick rendering in CM (1:3) and triangular filleting on top in cement mortar 1:4 complete all as specified and directed.

M & L for machine pressed precast concrete interlocking glossy finish paver block and any shape and size confirming to ISI5658-2006 of 60 mm thickness, M-35 grade chemically coloured over and including 25mm thick sand cushioning complete all as specified and directed.

M & L for Rendering 15mm thick in CM (1:4) on fair faces of PCC block walling, surface finished with sponge finish complete all as specified and directed.

M & L 15 mm thick Rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as spd and directed.

M & L preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for applying 2mm thick wall care putty over newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

S & F steel tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

15mm dia bore

20mm dia bore

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in CM 1:4 for concealed water tubing etc complete all as specified and directed.

Disconnecting existing PVC tanks upto 500 lit capacity, setting aside (or lowering if required) for cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed.

All as per item No 38 here-in-before but 1000 litre capacity.

All as per item No 38 here-in-before but 2000 litre capacity.

M & L PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 41 here-in-before but 75 mm dia.

M & L PVC (SWR)110 mm dia bends any radius complete all as specified and directed.

All as per item No 43 here-in-before but 75mm dia.

M & L PVC (SWR) branch piece, double (double Y) equal or unequal 110mm dia complete all as specified and directed.

M & L 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

M & L for 150mm dia (internal dia of pipe) salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M & L for concrete bed in plain cement concrete (1:3:6) type C2 to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and complete all as specified and directed.

S & F in repairs tested two way bib tap of cast copper alloys chromium plated, fancy type, with wall flange screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and directed. (Make : jaquar cat No, CON-047KN or equivalent model from the specified make given in PS).

S & F in repairs 15mm dia stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. Make : Jaquar Cat No. CON-053KN or equivalent model from the specified make given in PS.

S & F in repair, 15mm dia angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed down high pressure with crutch or buterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. (Make : Jaquar Cat No, CON-053KN) or equivalent model from the specified make given in PS.

S & F in repairs pillars taps CP 15mm dia , cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and flynuts complete all as specified and directed. (Make : Jaquar Cat No. CON-021KN) or equivalent model from the specified make given in PS.

S & F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured , including fixing bolts etc including PVC seat cover white flat bottom including MS, CP or aluminium anodised hinging devices including PVC low level flushing cistern 10 ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repairs oval shaped coloured vitreous china WHB table top Colonia snow white, fancy type of overall size 595 x 380 mm, cat No 7751 of cera or equivalent model of specified make given here-in-after including 32 mm dia CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges etc cutting nitches etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished complete all as specified and directed.

S & F in repairs vitrious china white wall hung urinal of size 340 x 320 x 650 mm , including, PVC waste pipe etc all accessories , Product Code: URS-WHT-13263 of Jaquar with sensotronic sensor flushing valve for urinal of Product code : SNR-CHR-51097 of jaquar or equivalent model from the specified make ginen in PS complete all as specified and directed.

S & F in repairs towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms complete all as specified and directed.

S & F Health faucet conforming to CAT No. ALD-573 of make "Jaquar" or of equivalent model from the specified make given in PS complete all as specified and directed.

S & F in repairs PVC connection 45cm long 15mm dia, with 2 Nos CP brass check nuts all as specified and directed.

S & F Toilet paper holder, Stainless steel, box type fix to wall with cromium plated brass screw complete all as specified and directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated sheathed 1100 Volts, ISI-694 marked drawn through Casing & Capping on wall /roof/ floor along with suitable fittings, with modular type sunken boxes of 1.6 mm thick of suitable size for mounting Modular switches sockets including making good disturbed surfaces to match with existing finishes including provn for housing switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor and connecting to the common earth dolly including taking down old existing wiring with all fittings and fixtures complete all as specified and directed for the following :

One light point controlled by one, one way switch.

One three pin 5 Amps socket outlet point controlled by one No one way switch on same board.

One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

All as per Item No. 61 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked drawn through duly casing & caping for 3 pin, 15 Amp socket outlet/metal enclosure, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly all as specified.

S & F Modular Switch, single pole, one way 6 Amp one module all as specified.

S & F Modular Switch, single pole, one way 16 Amp one module all as specified.

S & F Modular sockets, 6 amp 2/3 pin combined two module all as specified.

S & F Modular sockets, 6/16 amp 2/3 pin combined two module all as specified.

Supply and fixing in replacement the following accessories -:

White cover plate with frame, 2 module complete all as specified.

White cover plate with frame, 3 module complete all as specified.

White cover plate with frame, 4 module complete all as specified.

White cover plate with frame, 6 module complete all as specified.

White cover plate with frame, 8 module complete all as specified.

Supply and fix LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant model from the specified make given in the PS here-in-after.

S & F LED light fittings 2'x2', 34 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed. Make :- HAVELLS Cat part No. PLUTONEO2X2PLR34WLED857S 34W or equivalent model from the specified make given in the PS here-in-after.

S & F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 A , 240 Volts including taking down old existing one complete all as specified and directed.

S & F DB 4 way TPN double door, recessed mounted/ wall mounted, MCB as incomer is 3 pole and neutral of 63 A rated capacity and 16KA breaking capacity including taking down old existing DB with MCB's complete all as specified and directed.

All as per item No 71 here-in-before but SPN 8 way with 200 amp rated bus bar.

S & F MCB Four Pole rated capacity 63 amps, 430/440 V breaking capacity 10 KA ,C- curve complete all as specified.

All as per item No 73 here-in-before but double pole 32 amp 240 volts.

All as per item No 73 here-in-before but single pole 6 to 32 amp 240 volts.

M & L for Sub main wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid 20 mm PVC casing caping ISI marked and its accessories fixed in wall / roof / floor including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connection from DB to DB/ main board including taking dwon old existing sub main wiring complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 20 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 15 mm dia medium grade and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion complete all as specified and directed.

L.T Associate

TULSAYA CONSTRUCTION