Special repairs to Bldg No P-66 and P-68 at Bhim road under GE (West) Jalandhar Cantt

Amount

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

Roughning old concrete surface/floor by picking, sweeping clean and washing down with water to remove dust or removing any type of existing treatmen etc. complete all as specified.

M&L for applying evenly a coat of bitumen primer at the rate of 0.3 kg per sqm of the surface area complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate)as in roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified and directed.

M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces over bitumen primer @0.30kg/sqm complete all as specified

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate)as in roof kerbs or mud stops, benching rounded or chamfered on edges complete all as specified and directed.

M&L for 40mm thick brick tiles laid in cement mortar 1:6, 15mm thick and joints grouted flush with cement mortar 1:3 mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified

All as per item No. 9 above but except tiles complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

All as per item No. 12 above but area exc 1.5 Sqm and not exc 4 Sqm each.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, as per specification & drawing. complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel with wood free EPS design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face in frame at site as per specification & drawing

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., of size 125x 60 mm complete all as specified and directed.

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock strike plate of size 105 x60mm complete all as specified and directed.

M&L for PCC type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles complete all as specified and directed.

Supply and fix 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 21 here in before but of gauged shutter. Note for item No. 21 & 22 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

Supply and fix mild steel framed work as in doors/cupboard frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-410 all as specified and directed.

M&L for 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified and directed.

M&L for 25mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 40m dia mild steel cup board knobs fixed with nut , screw and washer of brass polished complete all as specified and directed.

M&L for Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified .

S&F continuous piano hinges mild steel bright finish of flap width 40mm complete all as specified and directed.

M & L for preparation of new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

M & L for preparation of old wood and wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including removal of existing finish complete all as specified.

S&F 4mm thick ordinary quality glass sheet and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S & F Figured glass pin head type glazed with oil putty in square n exc 0.5 Sqm in each pane, 4mm thick complete all as specified and directed.

M&L for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1:18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

Supply & fix extruded aluminium alloy handles, cast type, anodised, oval type, 150mm size, all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminum alloy anodised sliding door bolt 300mm long with hasp, staple (bolt tupe and fixing of clips of sheet, fixing bolts etc. complete all as specified and as directed.

S&F floor door stopper 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Demolition of reinforced cement concrete above ground level n.exc 15 cm thick complete all as specified and as directed.

M&L for cement concrete nominal mix type A1-1:1.5:3 (20mm graded aggregate) as in slab supproted on walls, beam and columns in floor, roof, manhole cover etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exc 200mm thick (Horz or sloping) flat rough finished surface of concrete complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken portion complete all as specified and as directed.

M & L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring complete all as specified and as directed.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of cement complete all as specified.

M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and as directed.

S&F 32mm dia GI pipe bevelled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM 1:4, straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and directed.

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: The rate quoted by the contractor shall be included for scaffolding, welded mesh etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)

M& L for machine cut kota stone slab flooring 18-20mm thick over and incl 20mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

All as per item No. 57 above but in skirting incl 10mm thick screed bed in CM 1:3 and taking down cement mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in benching or similar articles complete all as specified and directed.

Roughening old surface of concrete floors by picking, sweeping cleaning and washing down with water to clean the surface and brushing the neat cement slurry with 3 kg per Sqm complete all as specified and directed.

S&F 20mm thick granite(of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in CM (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and cut oval type in one end for WHB including 15 mm thick screed bed CM 1:4 as per directed by EIC.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic colour tiles 7 to 8mm thick joint free edge cut area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry in floor and pointed in colour cement to match the shade including sceed bed or bedding layer of mortar 15 mm thick 1:4 complete all as specified and directed.

S & F light shade vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles area exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed cement mortar 1:6 complete all as specified and as directed

M&L for coloured glazed ceramic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 15mm CM 1:4 complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

Material & labour for 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified & directed.

Material & labour for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Demolition and breaking up drain pipes 100/75 mm dia ( salit glazed ware, AC or rienforced conc ) set in cement Mortar complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes first quality single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S & F PVC (SWR) floor traps 75 mm size, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections inculding cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

S&F steel tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore complete all as specified and directed.

S&F steel tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20mm bore complete all as specified and directed.

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

S&F rotational moulded polythene water storage tanks double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity incl dismantling water tanks and removing to store complete all as specified and directed.

S&F rotational moulded polythene water storage tanks double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity incl dismantling water tanks and removing to store complete all as specified and directed.

Supply & fix ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified (Minimum weight 210 grams)

S&F in repair stop valve cast copper alloy fancy type CP, screwed down high pressure with capstan head, screwed both ends for iron pipes or for union & fixed in 20 mm bore pipe complete all as specified and directed.

S & F Stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore fixed in repair complete all as specified and directed.

S & F Stop cock/angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore complete all as specified and directed.

S&F in repairs brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for iron pipe 15mm bore complete all as specified and directed.

S&F as in repairs pillar mixer, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore complete all as specified and directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets. 10 ltr capacity in repair complete all as specified and directed.

S & F plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aluminised hinging device fixed in repair complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan(pedestal pattern) white (excluding fixing bolts, flushing cistern and floor pipe) complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket complete all as specified and directed.

S&F as in repair brass chromium plated shower rose 125mm complete all as specified and directed.

S&F 4mm thick superior quality straight shelve, made of transparent toughened glass, size 60cm long as per sample approved by GE, complete all as specified and as directed.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed.

S&F towel rack 24 inch CP type with all fittings and fixed to walls complete all as specified and directed.

S&F CP/Brass peg set of six fancy type complete all as specified and directed.

S&F 32mm dia waste pipe for WHB complete all as specified and directed.

S & F in repairs brass chromium plated health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing surface complete all as specified and directed.

Supply in fixing in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plugs, washer and wastes pipe , cast iron cantilever brackets and connecting union over all size 915 x 460 mm with bowl size 410 mmx 330 mmx 160 mm complete all as specified and directed.

S&F in repairs chromium plated grating 100/75 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.

S & F as in repair pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed.

S&F bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and directed.

S&F bib taps chromium plated fancy type, long body, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and directed.

M&L for 25 mm dia mild steel pipe curtain rod, powder coated fixed with & incl MS powder coated hooks/brackets and decorative finials (at both side), curtain rings (Min 5 Nos rings per running mtr of curtain road) shade as approved complete all as specified and as directed.

S&F 4mm thick superior quality shelves (corner), made of transparent acrylic sheet, set of three, size 30x30cm, 25x25cm, 20x20cm complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied

S&F stainless steel soap dish complete all as specified

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing out with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying 2 coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of new surface of wall with birla putty filling on plastered surface and applying two coats of oil emulsion distemper white or printed on walls complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall and applying two coats of cement base paint on one coat of putty filling over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coat of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down U/S submain wiring of two single core PVC cable, PVC insulated 4/6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc as directed by Engr-in-charge.

Taking down main switch/DB of any size and making good distrub surface of wall/floor complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 124 here-in-before but 3 pin socket outlet, 5 Amp on same board complete all as specified and as directed

All as per srl item No 124 here-in-before but for 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed

All as per srl item No 124 here-in-before but two way point controlled by one way switch complete all as specified and as directed

All as per item No. 124 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix socket out let multi purpose 5 Amps 5 pin flush type, 240 V complete all as specified.

Supply and fix switch socket combination multi purpose flush type, 6 pin 15 Amp 230/250 volts, AC with ISI marked multi pin complete all as specified.

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

S & F stepped socketed type electronic fan regulator flush type five steps all as specified and directed

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit length.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 4.00 Sqmm cable and one run of 4.00 earth wire & 20 mm PVC conduit shall be measured as one unit length.

Supply and fix DB SPN 8 way double door for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix distribution board vertical TPN, double door, 4 way 240 volts with sheet metal enclosure 200 amps bus bar suitable for fixing of MCCB complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Supply & fix MCB TPN, 63 Amps 415 volts complete all as specified and directed.

Supply & fix LED light fitting 22W (double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMILINEPLUSBS22WLED865SPCSS or equivalent of group 1 as mentioned in appendix 'B'

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply & fixing in replacement LED street light fitting 25 W including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core incl bracket and fixing complete all as specified and directed by Engr-in-Charge Make: Havells Cat Part No ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent of group 1 as in Appx 'B'

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors or fixed to poles/DB for cable protection complete all as specified and directed.

S&F bell, AC 230 volts single phase complete all as specified and directed.

Supply and fix exhaust Fan 300mm sweep, 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

Supply and fix in replacement decorative wall mounting type with colour ABS housing with polycarbonate range and glass shade with LED retrofit lamp 6500K (White colour) complete city-1 complete all as specified and directed.

AAY KAY ENGINEERS

M/S Kuldip Construction Co.

M/S Vinod Kumar

M/s Nirmal Singh and Co.