Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.7 L+₹1.8 L (4.57%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹43.1 L+₹4.2 L (10.7%)Rejected-AOC 148 MODEL TOWN PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹46.0 L+₹7.0 L (18.0%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
12 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
ANNUAL COMPREHENSIVE MAINTS AND PERIODICAL SERVICES TO OFFRS MD ACCN AT DHAULADHAR ENCLAVE UNDER GE (N) MAMUN
2022_MES_557771_1
GE(N)/M-32/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹94,000
6 Jan 2023
14 Oct 2022
14 Nov 2022
14 Oct 2022
12 Nov 2022
29 Oct 2022
Amount
Note for Item No 1 to 14 : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double/triple storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item. Nothing extra shall be admisible on this account.
M&L for repair, breaking of loose reinforced concrete, filling with PCC 1:1.5:3 type B0 using 12.5mm graded crushed stone aggregate (after getting the replacement of corroded reinforcement redone or welded to existing reinforcement at places if required) including necessary scaffolding and formwork as in chajjas, sunshades, roof projections, fascias and the like, rubbish off the premises complete all as specified and directed. Note :- Reinforcement steel shall be measured and paid for seperateyl under respecitve item of this schedule.
M&L for TMT steel bars 6-8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or necessary welding if required complete all as specified and directed.
M&L for plastering 15mm thick in two layers - internal layer 10mm thick, external layer 5mm thick mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces in chajjas/parapet walls etc, finished even and smooth with using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.
All as per item 4 above but taking down of existing plaster of any description, rubbish off the premises.
Supply only integral water proofing compound complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete if required, making the edges in true line, shape, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying Two coats of Alkali & fungal resistance, dirt resistance exterior paint (Weather coat) of required shade (Company Depot Tinted) with silicon additives over a coat of primer after preparation of new plastered surfaces complete all as specified and as directed.
All as per item 8 above but on old painted surfaces after Complete removal of existing treatment of any description.
M&L for preparing new plastered surface of walls and appying two coats of cement base paint including curing mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified and directed. Note:- Rate of silicon based water repellant compound are included in the quated rate.
All as per item 10 but applying one coat of cement base paint on old decorated surfaces including preparation of old plastered/unplastered surfaces of walls by scraping down smoke soot, mould moss and effloroscent salts making even and smooth with whitening complete all as specified and as directed.
M&L Preparation of old plastered/unplastered surfaces of walls by scraping down smoke soot, mould moss and effloroscent salts making even and smooth with whitening and applying two coats of cement base paint on old decorated surfaces complete all as specified and as directed.
M&L Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete, the colour of paint (dimension of letter shall be as per sample) complete all as specified and as directed.
M&L Writing Stops, commas, short lines, dashes, huphesn, brackets etc and the colour of paint (dimension of letter shall be as per sample) complete all as specified and as directed.
M&L for plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement including taking down existing cement plaster of any description, rubbish off the premises complete all as specified and directed.
All as per item 15 but 5mm thick in cemet mortar 1:3 as on chajjas, ceilings and the like.
Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/grinder and applying wall care putty to desired even and smooth and levelled surfaces (any thickness), sand papering to obtain surface smooth, and applying two coats of oil bound distemper complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls, applying wall care putty to desired even and smooth and levelled surfaces (any thickness)and applying two coats of oil bound distemper on walls over a coat of primer complete all as specified and directed.
M&L three coats of white wash on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.
All as per item 19 but on ceiling surfaces.
M&L Preparation of old plastered/unplastered surfaces by scraping down smoke soot, mould moss and effloroscent salts, tading oil & greasy spots including filling of cracks and small holes, making even and smooth, whitening complete and applying two coats of white wash complete all as specified and as directed.
All as per item 21 but applying one coat of white wash on ceiling surface.
M&L Preparation of old plastered/unplastered surfaces of walls by making plastered surface smooth using wall care putty to small disturbed surfaces (where required) and applying one coat of oil bound distemper on walls complete all as specified and directed.
M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item 24 but not exc 10 cm width or girth of steel surfaces.
All as per item 24 but on old painted wood & wood based surfaces.
All as per item 26 but not exc 10 cm width or girth of steel surfaces.
Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.
All as per item 28 but exc 1.50 sqm but n. exc 4.0 sqm with shutters.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removal complete complete all as specified and directed.
S&F factory made pressed steel frames made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats and applying two coats of synthentic enamel paint over a shop coat of primer all as specified.
All as per item 32 but size 105x60 mm.
S&F 35mm thick 2nd class hard wood plain framed, panelled (factory made) shutters two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed
S&F 35mm thick 2nd class hard wood glazed and skeleton door shutters, factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles, rails and other parts as per clause 8.20 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed.
M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed.
S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed.
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
All as per item 39 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.
S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips, removal of rubbish complete all as specified and directed.
M&L for 3 mm thick sheet glass ordinary quality, glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.
M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.
S&F as in repair 22mm outer dia MS decorative drapery rod ( As per sample) including suitable finals are made of ABS plastic in matching colours at both ends. The drapery rod shell be projecting 150mm outer side from the clear opening of doors/windows including necessary fittings complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed 10mm thick in CM (1:4), finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.
All as per item 52 but vitified ceramic tiles 9-10 mm thick (squre/rectangular) polished, area of each tile n exc 0.36 sqm.
M&L for vitified ceramic tiles 9-10 mm thick (squre/rectangular) polished, area of each tile n exc 0.36 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement over and including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes including dismantling of existing tiles of any description (but not backing) rubbish off the premises complete all as specified and directed.
All as per item 54 but non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc.
M&L for mirror polished 20mm thick Granite work (As per Sample) in single piece in cooking platforms and the like, set & jointed in neat cement slurry, pointing in epoxy grout to match with shade of granite, including making hole for gas pipe, laid over and including 15mm thick screed bed in CM 1:4 including dismantling of existing stone slab of any description complete all as specified and directed.
M&L green Marble work 15 mm thick (table rubbed and polished) as in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra including providing suitable hole for LPG pipe dismantling of existing stone slab of any description complete all as specified and directed.
M&L Round chamfering, to the edges of marble slabs complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore complete all as specified and directed.
All as per item 60 above but bore of pipe 20mm bore.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
All as per item 62 but 20mm bore tubes.
Refixing of old steel GI tubing 15 mm bore with new fittings, short pieces etc and fixed complete to walls, floor etc complete all as specified and directed.
All as per item 64 but 20mm bore tubes.
M&L cutting chases pinning in brick mass, making good to facing where required, pointing and making good in CM 1:3, cutting n.exc. 10 cm in girth complete all as specified and directed.
S&F in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.
S&F in repairs for Stop valve concealed cast copper alloy (ISI Marked) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.
S&F in repair Bib taps for 15 mm bore dia pipe, cast copper alloy, fancy type, chromium plated screwed down crutch or butterfly handle with brass ferrule complete all as specified and directed.
S & F in repair Vitreous china wash basin, white flat back size 550x400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, 32 mm dia PVC waste pipe including waste coupling 32mm size full thread complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste pipe and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm including 32 mm dia PVC waste pipe, waste coupling complete all as specified and directed.
S&F in repair health faucet, CP hand shower 8mm dia 1m long flexible hook and wall hook complete all as specified and directed.
S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.
Dismantling of water tank of any description i.e RCC/HDPE/Ferrocrete and removal of rubbish, S&F for Rotational moulded polyethlene water storage tanks of capacity 1000 litres two layer (cylindrical vertical with closed top),ISI marked, hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.
All as per item 74 but capacity 500 ltrs
S&F in repair for gun metal gate valves with iron wheel head, screwed both ends, butterfly handle for iron pipe 20mm bore complete all as specified and directed.
S&F in repair CP Shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair low level PVC flushing cistern 10 ltr capacity (handle type) including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
M&L French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new or old works with two or more coats to obtain required finish complete all as specified and directed.
S&F in repair factory made pre laminated 18mm thick lead free 100% solid WPC (wood polymer composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg/Cum bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc as per manufacturer's instruction complete all as specified and directed.
All as per Srl item No 81 but both side plain board without printed.
S&F factory made 5mm thick WPC (wood polymer composit) board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum bent 90° complete all as specified and directed.
S&F 150 mm size stainless steel brignt finish handle (as per sample) fixed with nut and bolts complete all as specified.
S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 600mm long complete all as specified and directed.
S&F stainless steel plain basket of size 17''x20''x6'' (as per sample) complete all as specified and directed.
S&F Stainless steel partition of size 17''x20''x6'' (as per sample) complete all as specified and directed.
S&F Stainless steel cutlery plate type of size 17''x20''x4'' (as per sample) complete all as specified and directed.
S&F Stainless steel cup & soucer of size 17''x20''x4'' (as per sample) complete all as specified and directed.
S&F Stainless steel plate basket of size 17''x20''x6'' (as per sample) complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges, fancy type with concealed pattern fitted to shutters complete all as specified and directed.
S&F Magnetic catcher (as per sample), fixed with nut and bolts complete all as specified.
S&F Stainless steel 100mm hasp and staples, safety type complete all as specified and directed.
M&L for cleaning of water tank by disconnecting water tank from Roof Slab/staging of single/double/triple story bldg, float valve with float arm and outlet pipe from PVC service water tank, emptying stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc, finally washing the internal surfaces with bleaching powder, closing wash outlet, re-fixing water tank, float valve and out let in position, replacemt of old PVC top cover with new with proper hinge type including minor repairs if required and testing of capacity exc 250 liters but not exc 500ltr complete all as specified and directed.
All as per serial item No. 94 but exc 500 liters but not exc 1000ltr
S&F in repair 20 mm dia MS tubular Towel rail, CP, 24" size complete all as specified and directed.
S&F in repairs PVC Bathroom Mirror cabinet (Size 500x400mm) fixed to walls complete all as specified and directed.
S&F anti cocroach grating of stainless steel size 100mm dia ( as per sample ) fixed in repair including making good to existing floor complete all as specified and directed.
Supply and replacement of mirror 5 mm thick of size 355x1220 mm with back plywood 6 mm thick to Table dressing (Ladies) including beading complete all as specified and directed.
S&F in repair 18 mm thick HDHMR ( high density high moisture resistance) board fixed with nails complete all as specified and directed.
S&F in repair shutter with 5mm thick sliding glass, standard aluminium channel having suitable channel for sliding plain glass with and including catcher/ roller etc (all as per sample) area not exc 0.5sqm complete all as specified and directed.
Supply and replacement of wooden drawers of built in dressing table ladies/gents (as per sample) fabricated with 12 mm thick first class teak wood for sides, plywood 6 mm for bottom & back, 18 mm thick HDHMR (high density high moisture resistance) board with glossy matt finish for front with the provision of anodised knobs complete all as specified and directed.
S&F in repair PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr, complete all as specified.
Supply and fix in repair rainwater pipes( any size or pattern) including all fittings for 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, complete all as specified and directed.
S&F in repair for stack clamps made out with flat Iron of size 25mmx4mm thick, including bolt & nuts and securing ends to wall for 100/110mm bore pipes completed as specified and directed.
Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and rubbish off the premises complete all as specified and directed.
M&L Cement concrete in sunken portion filling in mass concrete Type E2 1:5:10 (using 40mm graded stone aggregate) complete all as specified and directed .
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed. Note:- WPC shall be measured and paid separately.
M&L for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sqm per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
M&L for repair to old steel window not exc 1 sqm including replacement of unserviceable/damaged hinges, all handle and necessary welding to shutter and chowkhat for making window in serviceable condition including two coats of synthetic enamel paint complete all as specified
M&L 35 mm thick PVC factory made wire gauge door shutter and including of wire cloth ( steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm(double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.
All as per item 113 but Frames/Chowkhat of size 45x70mm, single rebate
S&F 35 mm thick factory made UV 3D printer flush door wood free consisting 5 mm thick solid pannel PVC sheet on both side (both side multicolour UV 3D printed) and consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm x 19mm for stiles as well as top, bottom and lock rail , The inside panel shall be consist 18/19 mm thick rigid solid PVC board complete all as specified and directed.
S&F in repair MS helical door spring 150mm size fixed to steel frame complete all as specified and directed.
S & F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed.
S&F in repair Bib taps long body for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.
S & F in repairs for pillar tap 15 mm bore, cast copper alloy, chromium plated, screwed down, high pressure screwed for iron pipe complete all as specified and directed.
S&F in repair chromium plated brass central hole single lever WHB Mixture 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.
S&F in repairs wall mixer for 15mm bore pipe, cast copper alloy chromium plated fixed complete all as specified and directed.
S&F in repair 3-in-1 wall mixture with CP telephonic shower and CP over head shower for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.
S&F in repairs Sink mixer for 15mm bore pipe, cast copper alloy chromium plated fixed complete all as specified and directed.
S&F in repair sheet glass assembly consisting of chrominium plated bracket, guard railing 24" long (as per sample) complete all as specified and directed.
S&F in repair glass corner shelf quarter round (225 mm dia) with CP Brass Bracket, complete all as specified and directed.
S&F in repairs CP soap niche fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as spd & directed.
S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete complete all as specified and directed.
S&F Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover (As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
S & F one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74 cm) white including making connections to trap, and to flush pipe including plastic seat and cover (As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed. Make : Hindware cat part No. 92082 and equivalent to Somany & Cera
S&F vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including CI 'P' or 'S' trap provision of lean concrete bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.
S&F in repair toilet paper holder with flash recessed type of stainless steel complete all as specified and directed.
S&F cover for plastic water closet seat closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair rubber lining fitted strip 100mm wide for door cill (as per sample) completed all as directed.
S & F 250 mm dia CP brass Towel Ring fixed with SS screws and rowel plug complete all as specified and directed.
Dismantling brick tile or terracing tiles single layer on roof complete all as spd and directed.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate ) padding as levelling course/padding using water proofing compound laid over existing roof , suface finished rough to recieve cement mortar including necessary formwork including demolition of existing concrete, with bedding layer of mortar of any description, removal of debris out off the premises complete all as specified and as directed. Note: WPC shall be measured and paid seperately.
M&L for 40 mm thick tiles (fly ash) bedded and pointed in cement mortar 1:6, 15 mm thick mixed with water proofing compound complete all as specified and directed.
All as per Srl item No 138 above but except brick tile using serviceable brick tile retrived from dismantling of brick tiles above complete all as specified and directed. Note: Cost for transportation and carriage for old serviceable bricks from one block to another block shall be included in the quoted rate.
M&L for demolition of existing concrete of any description and removal of debris out off the premises and providing PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) padding as levelling course/padding using water proofing compound laid over existing roof, suface finished rough to recieve cement mortar including necessary formwork including complete all as specified and as directed. Note: WPC shall be measured and paid seperately.
M&L for cement concrete (1:2:4) type -B1( using 20 mm graded crushed stopne aggregate) such as benching, coping, bed blocks,etc rounded chamffered on edges including necessary formwork including demolition of existing benching concrete of any description and removal of debris out off the premises etc complete all as specified and as directed
M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement including raking out joingts, hacking for key, scrubbing down with water etc complete all as specified and directed. Note: WPC shall be measured and paid separately.
APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane/ directed .
All as per item 143 but except "Provide solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm on accessible RCC roof as prescribed by manufacture of membrane on top of membrane".
Deduct: Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 30,045.50 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
dadwal engineers
M/S VIJ CONSTRUCTION CO
RAJBEER ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .