SITC of Audio Video system along with Projection System, Stage Lighting and Motorized Curtain System at Keshav Mahavidyalaya, Pitampura, Delhi SH SITC of 19 Rack Mount Antenna, Power Distribution system and Shifting of Light Control).

Supply, Installation, Testing and Commissioning (SITC) of 19" rack mount Antenna and Power Distribution System, designed to distribute RF signal over one pair of diversity antennas and to provide input signal and DC power supply up to four (4) dual receiver units, suitable for RF frequency range of 450–950 MHz, complete with front panel LED indicators for power and signal status, necessary RF connectors, interconnecting cables, mounting accessories, earthing, and all allied works required for proper installation and satisfactory operation, as per CPWD specifications and as directed by Engineer-in-Charge.

Supply & Laying of BNC Cable to connect Antena Distribution System with existing Val Audio Wireless Microphones complete as reqd.

Supply, Installation, Testing and Commissioning of BNC Connectors to connect Antena Distribution System with existing Val Audio Wireless Microphones complete as reqd.

Supply and drawing following sizes of PVC insulated Copper conductor unarmoured multicore cable in the existing wall and brackets from cable termination connector to the fitting i/c providing suitable lugs connetions etc. as reqd. a) 3 core 2.5 Sq.mm

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. a) 100 A,30KA,FPMCCB

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 3 x 2.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as reqd. a) 25 mm

Providing and fixing of PVC Trunking of following sizes complete with flexible cover, joint, endcap, cover , partition clip wherever reqd. on surface of wall/existing mounting etc. as required. a) 105 mm x 50 mm