RAPAIRS TO VARIOUS TYPE OF JOINERY, COLLAPSIBLE GATES, ROLLING SHUTTERS, HANGAR DOORS, EPU FLOORING IN TECH AREA AT AF STN PUNE

Amount

Taking down and refixing in same opening of chowkats or frames not exc 1.5 sqm each complete all as specified and directed.

Taking down and refixing in same opening of chowkats or frames exc 1.5 sqm n exc 4 sqm each complete all as specified and directed.

Resecuring or easing & adjusting with out taking down of shutters of any description n exc 1 sqm each complete all as specified and directed.

Resecuring or easing & adjusting with out taking down of shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed

Taking down and refixing of shutters of any description n exc 1 sqm each in same opening complete all as specified and directed.

Taking down and refixing of shutters of any description exc 1 sqm and n exc 2 sqm each in same opening complete all as specified and directed.

Taking down chowkhat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as specified and directed.

Ditto all as per Ser Item No. 7.00 above but exc 1.5 sqm and n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

Plain fillets exc 13 Sq cm but n.exc 25 Sqcm, square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed in repairs complete all as specified and directed.

S&F 40 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S & F glazed and skeleton shutters, open rabated and prepared to receive glass gauge etc second class hard wood 35mm thick for door shutter complete all as specified and directed.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall complete all as specified and directed.

S&F Steel window with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in bed blocks, bed blocks of hold fasts, coping and chamfered angles and throating etc. complete all as specified and directed.

S & F MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;hold fast ,railings; framework of water tanks and similar work conform complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 125mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 200 mm long complete all as specified and directed.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed lenght of bolt 300mm.

S&F 100 mm Mild Steel butt hinges with galvanisad mild steel hinge pin ,anodised and fixed ,type B-21 complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint on wood and wood base surface of any description not otherwise described, over 10 cm width or girth over a coat of pink primer incl preparation of surfaces complete all as specified and directed.

Taking down aluminium door shutter and make good by doing necessary repair and refixing the same complete all as specified and directed.

Aluminum anodized door shutter with frame of size 62.5x37mmx1.5mm thick with one or more rebate consisting of 5mm thick tinted glass pane, aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, , aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old Chowkhat with shutter complete all as specified and directed.

Aluminum anodized door shutter without frame aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, one or more rebate consisting of 5mm thick tinted glass pane, aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old wooden frame with shutter complete all as specified and directed.

S&F aluminum powder coated partition using ‘Jindal’ aluminum SP/DP section with 5mm thick tinted glass with PVC rubber bidding/12mm thick prelaminated particle board fixed with glazing clips etc/ both complete all as specified and directed.SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407 including removal of old existing partitions of any description

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws complete all as specified and directed.

Fixing only aluminium section any colour as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning and fixed in position with stainless steel screws complete all as specified and directed.

S&F in repairs aluminium Mortise lock vertical type, size 100 mm mild steel 4 levers complete all as specified and directed.

S&F in repairs aluminium (extrunded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised with hasp drawn steel spring, 140 mm over all length of cover plate in floor complete all as specified and directed.

S&F aluminium pivot set complete fixed in position in aluminium doors in repairs complete all as specified and directed.

S&F aluminium star lock for aluminium windows complete all as specified and directed.

S&F double action floor spring Hdraulically regulated made up of minimum 1.25mm thick aluminium alloy alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Ditto all as per Ser Item No. 40.00 above but removing and refixing with oiling and greasing and necessary repair and fixing complete all as specified and directed.

M&L for 18/19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber/aluminium frame work as in partitions etc complete all as specified and directed.

S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed including necessary preparation including removal of old wall lining of any description

M& L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

S& F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete including taking down old gate complete all as specified and directed.

Taking down and Refixing only Collapsible steel gates of any type (obtained from Ser Item No. 45.00 above) after making good & serviceable condition i.e. oiling, greasing & laths jointing complete all as specified and directed.

Taking down necessary parts of rolling shutters of any description area exc 4 sqm but n.exc 20 sqm each from brick/stone walls including top cover complete all as specified and directed.

Fixing only rolling shutters of any type (obtained from Ser Item No 47.00 above) after making good & serviceable condition i.e. oiling, greasing & laths jointing complete all as specified and directed. (Note Supply and fixing of any fittings or accessories required to replace shall be measured and paid separately).

S&F steel rolling shutters, without ball bearing manual type including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete with thickness of laths 1.25 mm complete all as specified and directed including removal of old existing rolling shutters of any description

S&F steel rolling shutters, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete with thickness of laths 1.25 mm complete all as specified and directed including removal of old existing rolling shutters of any description

S&F in repairs bevel gear box and crank hadle complete all as specified and directed.

S&F in repairs steel tension spring for rolling shutters complete all as specified and directed.

S&F in repairs ball bearing for rolling shutters complete all as specified and directed.

Supply and fixing in replacement of waste pipe for WHB/Sink complete all as specified and directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description complete all as specified and directed.

M&L for pre-cast cement concrete block masonry Type C-I 1:3:6 (20 mm graded aggregate) with solid block, exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

Rendering 15mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed.

Preparing on newly plastered surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick PCC type B-2 (1:2:4) using 40mm graded agg as in flooring finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded agg as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

S&F for 15 mm bore in repair bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule and fixed complete all as specified and directed.

S & F in repair stop valves fancy type chromium plated screwed down high pressureff, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore and fixed complete all as specified and directed.

S&F PVC flushing cistern, 10 Litres capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs complete all as specified and directed.

S&F in replacement 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof of any height,wall etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or frames of truss other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors, velly gutters etc confirming to grade Fe-410-O or Fe-310-O complete all as specified and directed including taking down old mild steel structures of any description.

Ditto all as per Ser Item No. 66.00 above but fabrication and erection only complete all as specified and directed.

M&L prepartion of new steel surface of any description over 10 cm in width or girth, not other wise described with two coat synthetic enamel (ordinary tint) enamel paint over one coat of red oxide zinc chromate on steel surfaces complete all as specified and directed.

Dismantling floor hearth wall tile incl cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles Dark shade 10mm thick (square/rectangular ) polished ,area of each tiles exceeding 0.36 sqm but not exceeding 0.42sqm in floors ,in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for pre-cast concrete machine pressed rubber moulded glossy finished interlocking paver Block of 60mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete including with using grey cement and pigment any shape and size conforming to IS-15658-2006 complete all as specified and directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F aluminium snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium complete all as specified and directed.

M & L for 5 mm thick EPU floor coating system including surface preparation by clearing from dust, muck, moisture & all foreign material and cleaned by mechanical scrubber/ grinder, chemical treatment for oil if required followed by application of primer which shall be a two component, solvent free, epoxy polyamido amine system having a volumetric ratio of mixing of 1 : 1 to yield a thickness of 100 microns then providing and applying the screed layer with Cipoxy 15 of minimum thickness of 2800 microns. The self levelling screed shall consist of a low viscous epoxy-amine cured system and graded aggregates (Special Silica). The epoxy system shall have a volumetric ratio of mixing of resin in 2: 1 ratio. The aggregates shall be added on the rate of 1: 3 or 1: 3.5 over that, copper tape, then conductive coat of Aquoxy ESD to be applied to a volumetric ratio of 3:1 to a thickness of 100 microns and finally Epoxy Polyurethane top coat which is a pre-weighed pack ready to mix and use which will consists of resin, hardner, EPI (Colour concentrate) formulated aggregates and carbon fibre. All these 5 parts to be added to agitate the mixture by an electrically driven motor and lay the mixture to the thickness of 2000 microns complete all as specified and directed and as per manufacturer’s instruction including removal of old unserviceable EPU flooring of any description. Note: (a) Rate included for necessary joint cutting and filling with polyurethane compound. (b) Rate included for necessary ground marking with yellow white and orange colour marking system

Smruti Construction

Parmanand Enterprises