providing and lying chain-link fencing work at Tsogstot Diskit of Nubra Forest Range under CAMPA

Amount

Earth work in excavation over area exceeding 30cm in depth as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed.

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. crushed

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm dia etc of all complete job.

Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required complete as per the direction of the in charge

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Steel work in built up tubular round square or rectangular including cutting, hoisting , fixing in position and applying of one priming coat of approved steel primer including welding and bolting with special shaped washers etc including Hot finished welded type tubes. 4” dia NB medium.

Cost and installation of one sign board with sizing (6’.00”x4’.00”) With 4’.00” leg including writing etc

Carriage of construction material by M.T as under:- a)Mechanical carriage of cement and fencing materials from sources to Diskit Nubra ( Avg distance of 115 kms)

(Iron angle470x9.60=4512.00kgs (chain link 188x24= 4512.00kgs )

Carriage of construction material by M.T as under:- Sand/stone agg. 58.22cum from a distance of 10kms.

Aggxima Entrprise