Improvement and Green Space Development of Park, Childers play material and out door GYM Equpment at VGP Pone Nagar OHT Park

Amount

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and clamping of 4x 16 Sq.mm PVC LTUG armoured cable including all the cost and conveyance of materials and labour charges etc complete As per SD 221

Supply and fixing of following HDPE Hose 32mm including cost and conveyance of all materials and all other labour charges etc. complete.

Supply Delivery and Fixing of 30w LED fitting including fibre connection junction box interial wiring works on each pole including cost of light fitting foundation works Complete

Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete

Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Duck Meri Go round using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete

Supply and delivery of FRB Solid waste bin 1 m hight Animal and Bird Models including cost and conveyance and all handling labour charges etc complete

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

T. MUNUSWAMY