SPECIAL REPAIRS TO MT VEHICLE SERVICING RAMP AND PROVN OF CERTAIN MINOR WORKS (MW No. 06, 07, 09, 11 AND 12) AT 58 SU AF STATION CHIMNEY HILLS

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in soft/ loose soil all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in hard/ dense soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soils all as specified and as directed.

Removing of excavated materials exceeding 250m but not exceeding 500m and dipositing where directed in soils complete all as specified and directed.

Removing excavated material exceeding. 1.50 KM but not exceeding 5.0 KM and depositing where directed in soils complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Taking down shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in other opening complete all as specified and as directed.

Taking down chowkats or frame area exceeding 1.5 sqm but not exceeding 4.0 sqm each including taking out hold fasts and PCC hold fast block complete all as specified and directed.

Raking out joints / pointing to squared rubble masonry, coursed or uncoursed stone masonry built in cement or cement lime mortar complete all as specified and as directed

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and as directed

Material and labour for hard core of broken stone or boulder (granite/basalt/trap) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and Labour for cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Material and Labour for cement concrete 1:3:6, Type C-0 (using 12.50 mm graded stone aggregate) as in filling to pressed steel door frame complete all as specified.

Material and labour for cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregates as in coping, bed plates, benchings, etc., including use and waste of form work, finished the surface fair and even complete all as specified and directed.

Material and Labour for precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed

Material and Labour for precast cement concrete block masonry type C-1, 1:3:6 (20 mm graded stone aggregate) with solid block, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3 kg of cement per sqm complete to receive new floor tiles, etc, complete all as specified and as directed.

Material and Labour for 18-20 mm thick granite stone slab (of any colour table rubbed and polished) as in steps, window-cills, cooking platforms, urinal partitions and the like, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone slab including grinding, polishing, rounding the exposed edges and necessary moulding, laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed.

Supply and fix 35mm thick second class hard wood, glazed and skeleton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc., edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ gauze complete sizes of members of shutters all as specified in SSR Part I, Section 8 clause 8.24(b) and as directed.

Supply and fix 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fixed to chowkats all as specified and directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed, all as specified and directed

Supply and fix 150 mm long extruded aluminium alloy handles, cast type, anodised all as specified and directed

Supply and fix 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed

Supply and fix stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Supply and fixing mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and untersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 all as specified and as directed

Supply and fixing mild steel framed work as in door or gates of angles or other section, with gusset plates, rails, braces etc., complete drilling, sheeting or other covering, doors prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410-W (Gde-E- 250) quality - A complete all as specified and directed

Supply and fixing mild steel framed work such as large gates, grills, gratings, etc, with end of bars shoudered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed blusters; walk ways; railings; framework for water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and Labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed

Material and Labour for plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410 -W (Gde E- 250) quality-A complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 10 cm long and not exceeding 15 cm long, diameter of neck 16 mm to 20 mm complete all as specified and as directed.

Supply and fixing pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and as directed.

Supply and fix galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pin (Each line wire to be measured) complete all as specified and as directed

Material and Labour for cement concrete 1:3:6, type C2, (using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, laid in panels, including necessary form work complete all as specified and directed.

Material and Labour for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) in floor as in sub base complete all as specified and directed.

Material and labour for 40mm thick, cement concrete 1:2:4, type B1, using 20 mm graded crushed stone aggregate, as in flooring complete all as specified and directed.

Material and Labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed

Material and Labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing liquid as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only item here in after

Material and labour for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces mixed with water proofing liquid as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only item here in after

Supply only liquid water proofing compound all as specified and as directed.

Material and Labour for glazed ceramic tiles of size 300 x 200 x 7mm thick on vertical surfaces as in dado/skirting set, jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including a backing coat of rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed of any length with rubber rings joints 110mm dia laid in floors complete all as specified and directed

Supply and fix in repairs PVC (SWR) 110mm bore, junction single (single T) Equal or unequal complete all as specified and directed.

Material and Labour for 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed

Material and Labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C2 for 150 mm dia pipes complete all as specified and as directed

Material and Labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel in cement concrete 1:2:4, type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed

Material and Labour for preparation of newly plastered or un plastered surfaces of walls and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface including two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

Material and Labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

SREE VARU ELECTRICALS

Vishwas Enterprises

Varsha Enterprises

Auromirra Enterprises

Vinayaka Enterprises

SAI CONSTRUCTIONS