Provision of compound wall near Bldg No P-196 at Mil Stn Dappar Under AGE (I) Dappar

Amount

M&L Brick work with sub class 'B' burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete 1:2:4 type B1 as in coping complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.

M & L for preparing new surface of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed by Engineer-in-Charge.

M & L excavating in trenhes , n exc 1.5m wide and n exc 1.5m in depth ; for foundation , etc. or for shafts , wells , cesspits , manholes , pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out and fair complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

Removing Excavated material not exceeding 500M and n.exc 1.5 Km and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L Cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete and for embedding posts (including caps and bases) complete all as specified and as directed.

M&L Mild steel TMT bar 12mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to, as in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge.

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engr-in-Charge

Formwork to sides and soffits of concrete foundations, footings , bases of columns , raft and raft beams , sides and soffits ( if any) of foundation and plinth beams; and similar work ; vertical or to batter for fair finished flat surface complete all as specified and directed by Engr-in-Charge.

Preparation of newly utreated steel surfaces, of any description, over 10 CM width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M & F mild steel bars Fe-410 10mm dia and over , cut ot length , bent to shape required , including ranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire( annealed) not less than 0.9mm dia or securing clips completely and as directed by Engineer in charge

M/s Guddu Builders

S M BUILDERS

power house batteries