Transportation. installation, necessary fabrication commissioning, and trial run of one no. 800mm width, 1 x 9.7kW, 550V, single drive belt conveyor along 10D for the development of trunk heading of sector-F in R-VIIA seam at 3n4 Incline, J.P. Colly.

Amount

Transportation. installation, necessary fabrication commissioning & trial run of one no. 800mm width, 1x9.7kW, 550V, single drive belt conveyor along 10D for the development of trunk heading of sector-F in R-VIIA seam at 3&4 Incline, J.P.Colly.

Loading, Transportation, unloading of the discharge drum, tail end drum, gear box, motor(9.7kW/550v), base frame, couplings, bearing blocks, fencing etc of 800mm wide pony belt conveyor from 316 mtr of new Incline, MIC to MIC surface via MUV.

Loading, Transportation, unloading of the 800mm width discharge drum, tail end drum, gear box, motor(9.7kW/550V), base frame, couplings, fencing etc from MIC surface to 3/4 Incline Unit, JPC surface with the help of crane and dumper.

Loading, Transportation, unloading of the 800mm width, 1x9.7kW, 550V Drive Head complete including discharge drum, tail end drum, gear box, motor(9.7kW/550V), base frame, couplings, bearing blocks, fencing etc from 3/4 Incline Unit surface to 16XD/71L(R-VIIA) through haulages and then manually transport for 200mtr. to the proposed - 10D belt installation site.

Fabrication fitting of the 800mm width, 1x9.7kW, 550V Drive Head complete including discharge drum, tail end drum, gear box, motor(9.7kW/550V), base frame, couplings, bearing blocks, fencing etc at the proposed -10D belt installation site.

Transportation of girders, strike plate, chute plates, scrappers etc from surface by haulages then manually transport for 200mtr to the proposed -10D belt installation site.

Installation at girders, strike plate, chute plates, scrappers at -10D belt installation site (R-VIIA) with necessary fabrication job.

Transportation of 30mtr. 800mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from surface to 16XD/71L by haulages and then manually transport for 200 mtr to the proposed -10D(R-VIIA) proposed belt installation site.

Loading, transportation and unloading of one breaker, starter, LS unit from surface to 15XD/71L(R-VIIA) with help of haulages then manually transport for 200mtrs to the proposed -10D(R-VIIA) proposed belt installation site and placing them.

Transportation of 250mtr 3.3kV grade 35 sq.mm. PVCDWA cable from surface after loading it on trolley and transport by haulages to 16XD/71L(R-VIIA).

Laying-Hanging of 250 mtr 3.3KV grade 35 sq.mm PVCDWA cable from 16XD/71L (R-VIIA) ACB to -10D (R-VIIA) ACB.

Transportation of 65mtr. 800mm width PVC belting from surface after loading it on trolley and transport by haulages to 16XD/71L(R-VIIA). 200 mtrs manual transportation of 65mtr. 800mm PVC belting from 16XD/71L(R-VIIA) to proposed -10D belt extension site.

Laying, lapping, jointing & tensioning of this 65mtr. 800mm width PVC belting in proposed -10D belt.

Transportation of 200 mtr belt sequence cable from surface to -10D belt starter, then laying placing them from 72L/16XD to 72L/-10D in R-VIIA seam.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from surface to proposed -10D belt installation site (R-VIIA) for 30mtr. belt and laying-placing them from along the proposed -10D belt R-VIIA seam.

Testing, trial run, alignment & commissioning of -10D belt conveyor from beginning of drift to end of drift in R-VIIA seam.

Supply of Materials

Supply of MS Nut+Bolt of 5/8"X2"

Supply of MS Nut+Bolt of 3/4 X 3"

Supply of DA Cylinder.

Supply of oxygen Cylinder

Total impact of GST for the purpose of CTC

RINA ENTERPRISE

BABLU SINHA