Maintenance of Public Toilet at kakkanji nagar in ward in Ward No.19

Dismantling the existing Floor Tiles With all cost and conveyance of materials, site and labour Charges ect., Complete as per standard specfication.

Dismantling the Existing damaged PCC including all cost and convenyance at materials to site and all labours charges etc., complete.

Conducting Geophysical Investgation for finding ground water table with necessary T & P including all labour charges etc complete as per std specification

Supplying of 140mm dia PVC Special Blue pipes for borwelles outer casing pipe of best quality including all labour charges etc., complete as per SI no 159.A (c) PWD schedule of rate and standard specification

Drilling of 125mm (4 1/2”) nominal dia vertical borewells anywhere in Tamilnadu in all formations, suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, consolidated formation etc and drilling over burden to a dia not less than 200mm including insertion of 165 mm PVC casing pipe, couplings caps and other relevant materials required upto the depth as directed by the Engineer or his representative including grouting of cement 25kg (minimum) up to the depth of over burden are including borewell development flushing of borewell at a pressure 7kg/cm2 (100 lb per square inch) including yield test, crew charges, cost of consumables, transportation charges of casing pipes and all other materials including assembling complete to the satisfaction of the Engineer and as stipulated in the technical specification. The entire works should be carried out as per IS 2800 Part I & II / 1979. Finished dia of borewells shall not be less than 145mm

Labour Charges for inserting 140mm OD PVC casing pipes assmbly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste ect.complete as per schedule item no 14-d(i)of TWAD schedule of rate.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using ground moulded country bricks of size 8 3/4"X4 1/4" X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with best quality enamel paint over New iron work including all cost of material and labour charges etc, complete

Painting two coats with best quality enamel paint over Old iron work including all cost of material and labour charges etc, complete

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed sc.cu conductor of 1100 V grade in suitable PVC rigit pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall covered with phullum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point ( Electronic regulator) ( 5 ponts per coil )SD1

Supply and fixing of 15W LED bulb (Philips/Havells) complete with T.W round blocks on wall or ceiling with flu tube with PVC unsheather copper leads from terminals to the fitting (Item No: 15 j)

Supply and fixing of 18W LED Tube light for T8 fitting (Single Side) with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(Item No: 15 g)

Supply and fixing of 1.5 HP compressor with motor including all accessories and oil etc complete.

Supplying of following pipes and special including cost and conveyance all materials etc. complete

1" HDPE hose

3/4" HDPE hose

1" GI pipe

1" GI union

1" GI elbow

1" GI tee

1" GI coupling

1" G.I Hex Nipple

1" x 3/4" GI Reducer

1/2" GI pipe

1/2" GI union

1/2" GI elbow

1/2" GI tee

1/2" GI coupling

¾” PVC Pipe

1” PVC pipe

¾” PVC Coupling

¾” PVC TEE

¾” PVC Elbow

¾” PVC BEND

¾” PVC END CAP

1” PVC Coupling

1” PVC TEE

1” PVC Elbow

1” PVC BEND

1” PVC END CAP

½” CP Tab

3/4" G.M. Gate Valve

¾” GI Elbow

1” GI Tank nipple

110mm PVC Pipe

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

1000 Litre PVC Tank

Errection of pipes and specials in to borwell and conneckion 1.50 HP compressor motar etc., complete as per standard specification