REPAIR REPLACEMENT OF PERIMETER STREET SECURITY LIGHT HIGH MAST LIGHT LT CABLE TIMER INCL SOLAR LED LIGHT AND ALLIED WORK AT MALLAH PUMP HOUSE SEWAR FORT AND PARADE GROUND AND COMPREHENSIVE MAINTENANCE OF STREET LIGHT TIMER SWITCH EARTHING AND CONNEC

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and getting out for laying of cable etc. complete all as specified.

Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting pointcomplete all as specified.

M&L Protection to cable with one layer of bricks laid flat abutting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ burnt-clay bricks, complete all as specified.

M&L Un washed dry river sand as cushioning of under ground cable and punned after laying complete all as specified. Note: Only punned thickness will be measured

Taking out old un-servicable/ faulty PVC armoured LT under ground cable of any size any core complete all as specified.

S&F or laying cross linked poly-ethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables ( heavy duty) with aluminium conductor, 1100 volts grade of following cross-sectional area laid in trenches/through pipe in road crossings/ paths /drains /ducts /floors /along poles/walls/ceilings/ equipments etc including commissioning and testing complete all as specified. (Note: :- (i) Necessary excavation and earth work, brick protection, sand cushioning and cover and GI pipe shall be measured and paid for separately.)

(a) 16 Sqmm X 4 Core

(b) 10 Sqmm X 2 Core

(c) 10 Sqmm X 4 Core

(d) 25 Sqmm X 4 Core

(e) 35 Sqmm X 3.5 Core

(f) 95 Sqmm X 3.5 Core

(g) 120 Sqmm X 3.5 Core

(h) 240 Sqmm X 3.5 Core

Taking down non functional/ unserviceable /energy inefficient street /security light fittings of capacity upto 250W existing and re-fixing after minor repair to existing / directed location complete all as specified. Note: Material shall be measured and paid searately under respective items.

Supply only LED surge protector 10 KV multiple type 2 surge arrestors with thermal monitaring device and connector,dual visual fault indicator for the discharge path of the supply voltage and control the phase complete all as specified.

Supply only LED drivers rated voltage 12/24 volt maximum out put power 40 W typical efficincy 93% complete all as specified.

Supply only LED drivers rated voltage 12/24 volt maximum out put power 70 W typical efficincy 93% complete all as specified.

Supply only LED drivers rated voltage 12/24 volt maximum out put power 90 W typical efficincy 93% complete all as specified.

Supply only LED drivers rated voltage 12/24 volt max out put power 150 W typical efficincy 93% complete all as specified.

S & F street light GI bracket of 0.9 mtr long made out of 32 mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of flat iron 32 x 4mm including nuts bolts & washers for fixing on wall complete necessary fixing arrangements on pole including taking out old unserviceable bracket complete all as specified.

S & F in replacement 4 sqmm solid conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular from junction box to fitting complete all as specified.

S&F in repair of automatic Infrared Sensor used in NATURE SWITCH for automatic switching of street lights. Nature switch operation switch operation should be based on Natural light Lux level. Required illuminance level for Switching ON is<= 30 lux and for switching OFF>=10 lux. The sensor should also have part night operation facility of min 4 hours to max 12 hours complete all as specified. Make :Nature switch:Kakatiya Energy system/Bajaj/Healer

Supply, install, test and commissioning factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 205 x 255 x 112 mm depth with cable entry size of 10-25 sqmm with terminal incl Aluminium bus bar of 63amp-04 Nos and MCB SP 6amp-01 No complete all as specified of make sintex/hensel/Fibox

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 30/35 watts (Surge protection of the light should be 10 KV ) with suitable drivers etc , fixing to wall / pole complete all as specified. Make:- Crompton / Philips/Havells/Halonix.

All as per item No 18 here-in-before but 45 watt LED fittings complete all as specified.

All as per item No 18 here-in-before but 60 watt LED fittings complete all as specified.

All as per item No 18 here-in-before but 90 watt LED fittings complete all as specified.

All as per item No 18 here-in-before but LED flood light fittings 120 watts complete all as specified.

All as per item No 18 here-in-before but LED flood light fittings 200 watts complete all as specified.

Supply and fixing in replacement MPPT charge controller of Lithium base Energy efficient integrated Solar street light complete all as specified.

Supply and fixing in replacement Metal core PCB of Lithium base Energy efficient integrated Solar street light complete all as specified.

Supply and fixing in replacement Green/Red indicator switch of Lithium base Energy efficient integrated Solar street light complete all as specified.

Supply and fixing in replacement battery rating 12.8V/42Ah-BIS standard of Lithium base Energy efficient integrated Solar street light complete all as specified.

M&L for painting on steel pole initially scraping deteorated paint by emery paper and complete removal of rusted suface, painted with one coat of red oxide zinc chrome primer on exposed prepared surface and providing 03 Nos of 30 cm wide circular bands with black and yellow paint starting from bottom level at a gap of 30 cm in between 2 bands and numbering of pole with yellow paint over black painted background at the height og 02 meter from the bottom of pole with 02 cm larger Bold letter of height 2 inch wide complete all as specified.

Supply and fix MCB’s tripple pole & neutral 63 Amps, 415 volts with ‘C’ curve, fixed complete including taking down complete all as specified.

Supply and fix MCB’s single pole 6-32 Amps, 230 volts with ‘C’ curve, fixed complete including taking down complete all as specified.

Supply and fix in replacement of IP65 rated LED Bollard with soft 360 deg light distribution with base plate and necessary foundation and connected electric connections and PCC work complete and IP 65/66 complete all as specified Make : crompton / Phillips / Bajaj

S&F 20 mm dia Unplasticised PVC pipes of pressure rating 10 Kgf/cm2 fixed on pole with MS clamps made out 25 x 3 mm thick MS flat with the size of pole , nut, bolt etc complete all as specified.

Supply jointing connecting in repair and testing, straight through joint, epoxy based complete with jointing material and all standard accessories suitable for XLPE insulated armoured aluminium conductor cable, LT 1100 Volts, aluminium conductor of 10/16/25 Sqmm suitable for 4 core complete all as specified.

S & F PVC insulated stranded copper conductor cable of size 1.5 sqmm x 3 core from Juction box to street light complete all as specified.

M&L for Cutting, trimming and prunning of trees, branches of any girth all around existing LT over head lines including cleaning the disturbed area beneath the LT overhead lines/LT Poles and removing the creepers/climbers tree branches and debris from site and depositing where complete all as specified.

M&L for Servicing of complete high mast of any make any model, cap, height by greasing of wire rope, winch, motor with complete function, proper connection of light fittings in lantern carrage, cleaning & proper connection of High mast panel complete all as specified.

Supply and fix / draw PVC insulated and sheathed trailing cable copper conductor cable of size 2.5 Sqmm 5 core, EPR PCP round cable 1100 volt grade. Including taking down old any type cables complete all as specified.

Supply and fix in repair LED Type Aviation obstruction light comprising of aluminium housing with polycarbonate enclosure, 302 Nos. LED are provided fixed in position complete all as specified.

S&F in replacement of 2 Pole 18 Amp power contactor, AC 3 rating, fixed in existing panel & connecting complete all as specified. Make: L&T / Legrand /Siemens/ABB

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified.

Repairing of 1 HP capacity electric motor of high mast, AC 3 phase, dismantling the motor cutting and taking out the old winding wires, cleaning the slots, rewinding the motor with appropriate size of super insulated copper conductor winding wire of same gauge, and varnishing complete including replacing the worn out bearing reassembling the motor fixing in same position and testing complete all as specified.

Boring of holes under road, pavement, hard standing for laying of pipe upto 150 mm bore complete all as specified. Note :- GI pipe shall be measured and paid separately in relevant item of BOQ.

S & F or laying galvanised steel tubing Light grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of following size complete all as specified.

(a) 40 mm bore.

(b) 50 mm bore.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate for pedestal of poles/ coping including necessary formwork, fair finishing to exposed surfaces using extra cement including demolition of old PCC complete all as specified.

Excavation in trenches not exc 1.5 M wide but exc 1.5 M and not exc. 3.0m in depth for pipe line/pole, etc in soft / loose soil getting out and levelling of bottom surface to required level Excavation in trenches exc 1.5 M wide but exc 1.5 M in depth for pipe line/pole, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

Dismantling and taking down non functional/ unserviceable street /security light fittings of any type (HPSV/bulk head light/CFL etc)of capacity upto 400W existing complete all as specified.

Supplying, errecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide complete all as specified. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply & fix in replacement 60 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium with following specification IP66 with 10KV surge protection , PF>0.95, THD < 10%, input voltage 220-240V AC, operating voltage (VAC) 100V -300 V, Lum Flux (+-) 10% , CRI -80 Lum efficienacy (+-) 10% CCT -5700K road way,luminaire with high power LED as light source alongwith suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor with PVC Conduit 20mm dia from fittings to the jucntion box and fixing to complete all as specified.

All as per above item No here-in-before but 90 watt LED fittings complete all as specified.

All as per item No above here-in-before but LED flood light fittings 150 watts 230 volt complete and all assy duly prewired and pressure die cast aluminium housing,heat resistant tough glass with frame,IP 66 protection ans better optic for uniform distribution.

S&F in replacement MCCB 04 pole 100 Amp, Thermal maganatic, adjustable type, breaking capacity not less than 25KA,415 volts complete all as specified.

S&F in replacement MCCB 04 pole 160 Amp, Thermal maganatic, adjustable type,breaking capacity not less than 25KA,415 volts complete all as specified.

M & L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required complete all as specified. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy , corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp, inbuilt MPPT charge controller, IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with greater than 150 lumen per watt,5700ANSI, cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs, weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete all as specified.Make: Orient/HAVELLS/Crompton Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.

S&F time switch type Alpharex3 D 21 astro, complete all as specified. Make : Legrand Cat Part No.412654 or equivalent in Siemens/L&T

Supply and fixing in replacement 40 amps TP power contactor, complete all as specified. Make - Legrand Cat Part No-412549 or equivalent in Siemens/L&T)

Supply and fixing in replacement 32 amps TPN MCB, complete all as specified. Make - Legrand/Siemens/Schneider

S&F 2.5 Sqmm 3 core stranded PVC insulated copper conductor FRLS cable for connection of fittings, complete all as specified.

S&F in replacement of driver for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified. Make : Havells/Bajaj/Philips

M&L for finding faults of LT UG cable XLPE, of any size and any length by using computerised / primary current injection method / any other method as directed by the GE and locating fault, cutting and removing the faulty portion of the cable and jointing with suitable cable joint and testing after jointing complete all as specified. Note: Joints shall be paid for separately.

Supply and fixing in repairs high bay LED light fittings with highly efficient LED baylight capacity 100W made of pressure die cast aluminium housing extraded aluminium heat sink & enclosed with toughended glass IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting, including fixing arrangement on truss with MS Clamps made out of 25x5mm flat iron with nuts, bolts etc complete painting with two coats synthetic enamel paint over a coat of red oxide complete dismantling existing unserviceable high bay fittings complete all as specified.

M&L for straight through joint (epoxy) suitable for 3 ½ / 4 core up to 95 Sqmm size underground cable complete all as specified.

M&L for straight through joint (epoxy) suitable for 3 ½ /4 core 120 to 240 Sqmm size underground cable complete all as specified.

Taking down existing LT Panel and refixing the same and provision of PCC platform made out of 1:2:4 type B1 and pedestal of 45 cm height from GL with suitable nut, bolts, washers etc and connected accessories complete all as specified.

Sadhana Enterprises (BID ID -3341743)

Vijay Electricals (BID ID -3341119)

PD GUPTA AND COMPANY (BID ID -3341110)

M/S BAJRANG CONSTRUCTIONS (BID ID -3341830)

DEMROT ELECTRICAL WORKS (BID ID -3350628)