Loading
Loading…
Loading…
Tender Value
₹6.3 L
EMD Value
₹12,550
Closing Date
16 Jul 2026, 11:00 am4d left
Executive Engineer
Jal Shakti Division Solan
SH Drilling by DTH/ ODEX percussion/ Calyx/ RC portable rigs 100 metres deep and its energisation
2026_HPIPH_138490_1
5655-5754 dated 07.07.2026
Open Tender
Civil Works
30 days
Solan
Please refer tender notice
7 documents required · 7 mandatory
₹350
₹12,550
8 Jul 2026
8 Jul 2026
16 Jul 2026
8 Jul 2026
16 Jul 2026
8 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Transportation of suitable truck/ tractor where only road available, DTH & ODEX/ Percussion Calyx/ RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in- Charge. | 1 | Each | 1.25 | ₹1.25 |
| 2Drilling bores of 165mm dia as per IS:2800-1979 using DTH from ground level in the over burden as per directions of Engineer-in-Charge/ Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sand stone, limestone, dolomites, conglomerate, silt, clay or any other type of sedimentary, metamorphic and igneous rock including cost of attachments, consumable stores, bits, water, POL etc. complete in all respect as detailed below:- | |||||
| 2.01 | From 0m to 20m depth | 20 | P/Rmt | 1.25 | ₹25 |
| 3Drilling bores of 152 mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble,gravels, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directions of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | |||||
| 3.01 | Non Trible Area | 100 | Per Rmt | 1.25 | ₹125 |
| 4Supplying and lowering of IS Marked 125 mm dia PVC casing pipe medium class 5mm thick screwed and socketed as per IS 12818-1992 (Part-1) with upto date ammendments including cost of all cuttings, factory threadings, welding, wherever required, in random lengths of 6 mtrs. including transportation charges (For DTH bores) complete in all respect as per direction of Engineer-in-charge. | |||||
| 4.01 | Non Trible Area | 100 | Per Rmt | 1.25 | ₹125 |
| 5Supplying and lowering of IS Marked 125 mm dia N.B. 5mm thick fincut MSERW casing pipes as per IS : 4270-2001 and requirement of ODEX attachement from approved manufacturers complete in all respect as per direction of Engineer-in-charge. | |||||
| 5.01 | Non Trible Area | 100 | Per Rmt | 1.25 | ₹125 |
| 6Prividing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per directions of Engineer-in- Charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
Form_6.pdf
Tender Documents • 0.83 MB
Form_8.pdf
Tender Documents • 1.34 MB
Terms_and_condition_specification.pdf
Tender Documents • 0.43 MB
BOQ_205166.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid