COMMUNITY COMPOSIT PIT AT PANCHAYAT HALQA BEHIBAGH

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

P/L of stone soling dully hand packed hand rammed incl. filling the interstices with stone chippings, all carriages complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size):

6 mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand)

Centering and shuttering including strutting, propping etc. and removal of form for,Suspended floors, roofs, landings, balconies and access platforms.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and Fixing pre-coated galvanized iron high rib profile sheets of TATA/JINDAL (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Providing and Fixing hard drawn steel wire fabric mesh 25 mm x 25 mm size fixed and firmly anchored to steel frame

Carriage of material from Source upto site of Work by Mechanical Transport