Augmentation of outdoor sports facility in PTAA complex and surface improvement of Junior College football ground at Anushaktinagar, Mumbai.

ABSTRACT SHEET

PART I - CIVIL WORKS

Description of Work / Item(s)

PART I - CIVIL WORKS

Depth not exceeding 1.50m from ground level.

Depth exceeding 1.5m & upto 3 m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeding 1.5m & upto 3 m from ground level

Earth work in surface excavation not exceeding 30 cm in depth including disposal of excavated earth with in PTAA, disposed soil to be levelled and neatly dressed complete all as directed

Providing and fixing Hydraulically pressed factory made Kerb stones from approved manufacturers M/s.Super Tiles or Other equivalent , made up of Cement Concrete of grade not less than M:30, andhaving size 500 x 325 x 125 mm, of approved design, fixing with ready mix CM 1:3, jointing and pointing in ready mix CM 1:3 etc. including 2500 mm wide and 75 mm thick PCC 1:2:4 and painting with approved shade & colour synthetic enamel paint coat over a coat of primer etc.,complete as per specification and as directed by EIC.

Proving & shaping & fixing of Malkhamb pole made out of First class Seasoned and without knots teak wood, free-standing upright pole, about eight to ten inches planted into the ground. size 2.6 metres (8.5 ft) in height with a circumference of 55 centimetres (22 in) at the base and gradually tapers to a circumference of 35 centimetres (14 in) at the top/ as per standards, Castor oil polish/ as per standard and fixing in ground as per requirement by embedding in concrete block of P.C.C. 1:2:4 and fixing in position, including two coats of bituminous paint to the surfaces in contact with masonry/concrete etc. complete all as directed by the Engineer-in-Charge.

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete all as per specifications, drawings & as directed by the Engineer in Charge. Note: Nominal reinforcement if provided shall be measured & paid under relevant item.

PCC of Mix 1:2:4

Reinforced Cement Concrete of grade M-30 in foundation, plinth & superstructure for all type of Structural/ RCC elements conforming to IS 456-2000 , IS 3370 (latest) and IS 13290-2002 using 20 mm. maximum size down graded stone aggregate including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing etc. complete as per specifications and drawings for the following etc. complete as directed by Engineer -in-Charge.

For all type of structural / RCC elements with all geometrical shapes.

Reinforcement for RCC work including supplying steel bars of various diameters as required at site of work including loading, unloading, transporting, decoiling,straightening, cutting, bending placing in position and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. Note:- Cost of binding wire shall be borne by the contractor & shall not be measured for payment.

Thermo Mechanically Treated bars of grade Fe-500

Providing, erecting, fixing in position striking /removing and cleaning steel / timber shuttering & cantering for form work in foundation , plinth or tie beams,lift pits, cable trenches, electrical pits etc. atall locations for all geometrical shapes inplain,curved surfaces of structural / RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. complete as per specifications drawings and as directed by the Engineer-in-charge.

Providing random rubble masonry with rough dressed hard stone below plinth in foundation, plinth, retaining wall, tree guards, sitting etc. in cement mortar 1:6 including through stone, header stone, bond stone, quoins etc. well packed including filling the interstices with smaller stone chips, striking, raking out joints & finishing the joints, including scaffolding, curing etc. all complete as per specifications, drawings and as directed by the Engineer in Charge.

Brick masonry work in foundation ,brick sitting, bench, stool (curved or any geometrical shape) ,plinth, cable pits,trench, steps, storm water drain, footpath etc. at all locations using well burnt bricks from approved lot,of class designation 3.5 (classification as per IS1077-1992 and min. average compression strength not less than 3.5 N/mm2 ) in C.M 1: 6 to correct line, level and plumb including raking out joints / simultaneous flush pointing with cement mortar 1:4, curing etc.complete asper specifications, drawings and as directed by Engineer in charge.

Sand faced external/ internal cement plaster as specified below in Ready MIx Mortar 1:4 at all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line,level and plumb, curing including making grooves, vatas, plaster fluting (plaster in steps) etc. where ever required complete as per specification and drawings and as directed by the Engineer in Charge.

20 mm thick in two coats for brick/concrete surfaces (external / internal) (backcoat and finishing coat of 10 mm. thick each)with water proofing agent @ 2% by weight of cement.

12 mm thick in single coat smooth plaster finish for independent concrete/brick surfaces

15 mm thick plaster

Making and finishing in matching plaster finish grooves of various sizes as per drawing , in plaster, at all locations to proper line, leveland plumb all as per specifications , drawing & as directed by EIC

Making various moulds / bands (projections from plaster) of sizes upto 100 mm wide and 20/25mm thick in curve/square shapes around circular/rectangular columns in C.M. 1:3 as specified below, in proper line, level, shape and design as shown in the drawings and as directed by the Engineer-in-Charge. Note : The cost of GI wire mesh used here will be paid under relevent item seperately.

Site clearing work for proposed area by clearing the area of deep wild vegetation/jungle/forestations etc. by completely uprooting and cutting all wild plants, trees etc. having girth of upto 150 mm, trimming the stems/trunk and any other overhanging branches found obstructive, uprooting all wild grass, wild hedges, thorny bushes/plants. Identifying trees having girth more than 150 mm. Collecting all cut and cleared vegetation from the area of work and disposing off within 1.0 Km radius. stacking the serviceable materials , clearing and cleaning all side brims of fallen or washed away wild vegetation / tree leaves/grass/rubbish etc. as per conditions as per prevailing at site of work including cost of all labour, tools and plants, sickles, lift and lead charges, manual loading/unloading, passive levelling the rough ground ares all generally as per work specifications for jungle/wild vegetation clearance etc. complete and directed by Engineer-In-Charge

Supplying and spreading IRC metal of size 63-45 mm graded metal at the site of work all as per specifications and as directed by the Engineer-in-Charge. (Stacked stone will be measured for payment)

Proof rolling with 8/10 tonne power roller over sub-base of the road to achieve proper consolidation including watering etc. completeas per specifications, drawings and as directed by the Engineer-in-Charge.

Providing & laying machine cut & machine mirror polished kotah stone on sitting steps in single piece, facia, tree guard top,flooring,steps, riser etc including necessary cement morta bedding / backing, close jointed & grouted with matching cement slurry and finished to line, level, curing etc. as required, including cutting of stone slab, wastage, making cutouts,wherever required etc. complete all as per specifications, drawings and as directed by the Engineer in charge.a) On sitting steps, tree guard ,steps etc of required length ,shape and 25mm thick laid over & including 20mm. thick cement mortar 1:4 ( I cement : 4coarse sand) bedding. b) In Facia,Riser,skirting, including 20 mm thick or sizes as per working drawing laid over and including 12mm thick cement mortar 1:3 ( I cement : 3coarse sand) backing including providing grooves if necessary chasing the brick masonry etc.complete.

Providing and making stamp concrete of approved pattern, shade, shape & design with stamping tools with cleaning the surface with water jet complete all as per specification, drawing & as directed by EIC (Note : Cost of under layer concrete mix shall be paid seperately.)

Supplying and laying water bound macadam(WBM) sub-base with 90-45mm size stone aggregate, stones screeding of 12.5mm max.size in layers as specified below, each layerof 150mm thick laid loose and consolidated to115mm thickness including breaking stone if required, screening, sorting, spreading to regular line, level, template and supplying and blinding with stone dust, watering, consolidating each layer properly with 8 to 10tonnes power roller including cost of all materials, labour, finishing to proper gradient,camber etc. complete as per specifications &as directed by the Engineer-in-Charge.

Providing and laying hot mixed hot laid layers of 50 mm average consolidated thickness premixed bituminous macadam over WBM surface using approved graded I.R.C metal 32 mm down, min.3.7 %bitumen( or as designed by contractor for better results, No additional payment for extra bitumen) of grade 60/70 including removing loose material from existing surface with wire brushing, brooming and mechanical spreading, machine laying, bituminous course to correct line and grade, slope etc. complete compacting thoroughly with 10/12 tonne power roller including applying a tack coat of bitumen 60/70 grade @ 7.5 kg/ 10 sqm as per specifications all as directed by the Engineer-in-charge.

Providing and laying hot mixed hot laid premixed bituminous seal coat of 15 mm consolidated thickness over asphalt macadam surfaces min. 7% bitumen ( or as designed by contractor for better results, No additional payment for extra bitumen) of grade 60/70 including machine mixing, laying by mechanical spreading machine and compacting thoroughly by 10/12 tonne power roller etc. to correct level and line, grade, slope including applying a tack coat of bitumen 60/70 grade @ 7.5 Kg./ 10Sq.M. etc. complete all as per specifications and as directed by the EIC.

Providing Exterior Grade outdoor type all season ITF classified UV stable Five layered Synthetic Acrylic PU standard system floor for Skating Rink as per ITF approved manufacturers specifications including marking of court lines with Hi-line paint including Surface preparation etc. complete all as directed by the Engineer-in-charge (ITF approved Five layer cushioning system should be submitted to department before start of work for approval of competent authority)

Providing Exterior Grade outdoor type all season ITF classified UV stable Eight layered Synthetic Acrylic System for outdoor Basket ball court as per ITF approved manufacturers specifications including marking of court lines with Hi-line paint including Surface preparation etc. complete all as directed by the Engineer-in-charge (ITF approved Eight layer cushioning system should be submitted to department before start of work for approval of competent authority)

Supplying, fabricating, fixing in position G.I.chainlink fencing of 50mm x 50mm and 4mmdia. wire with chain link net fixed to iron anglesframe of size 40x40x6mm and MS flat frame asshown in drawings (M.S. works shall be paidunder relevant item ) including cost of hooks,bolts, nuts, washers required if any andpainting chain link and MS frame work with twocoats of synthetic enamel paint over a coat ofapproved anticorrosive primer, etc.completegenerally as per specifications and drawings.Note: PCC, MS angle, flats, shall be paid under relavent item.

Structural steel work in frames, covers, using angles, tees, flats, bars , chequered plates,inserts fabricated out of mild steel bars, ISMC,ISMB, ,angles, pipes , plates and diaphram plates for expansion joints etc. of all shapes, sizes including supplying, cutting,fabricating, welding, erecting, making holes/chases wherever required and fixing/embedding in position in concrete/brick workwith necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding including painting two coatsof anticorrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour onall exposed surfaces over a coat of approved steel primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.

Providing brick work 115mm thick in partition walls, dwarf walls, parapets, under platforms,curtain walls, fins,external boxing etc. at allfloors and locations as per drawing using wellburnt bricks from approved lots of class designation 3.5 (classification as per IS1077-1992 and min. average compressive strength not less than 3.50 N/mm2) in C.M 1:4to correct line, level & plumb including scaffolding, raking out joints, curing etc.complete as per specifications drawings & asdirected by the Engineer in charge.

i)with 115mm.wide and 80mm. thick RCC(1:2:4) stiffeners at every one metre height including formwork but excluding the cost of steel reinforcement, which shall be paid under relevant item. ii)Without RCC stiffeners for support walls,nitches etc.

Painting plastered / concrete surfaces with two coats of exterior grade acrylic emulsion paint of approved colour and shade over a coat ofapproved cement primer including all as per manufacturer'srecommendations and as per the approvedsample including providing necessaryscaffolding,cleaning the surface with water toremove all coating, dust, filling up cracks &crevices with approved putty, curing thesurface etc. complete as per specifications and as directed by Engineer in Charge

Painting over the existing/old structural steel frame, cover ,fencing etc. with two coats of synthetic enamel paint in black/gold/other approved colour of approved make over a coat of approved steel primer etc complete as per specification, drawings and as directed by EIC

Providing and applying synthetic plaster finish paint "Renovo/Durashield/RUF & TUF of Sherwin Williams[BJN Paints]/ Chemtex or approved equivalent paint over plastered surface by applying one coat of approved coat of ASP as per manufacturers specification by trowel and applying Two coats finish of approved colour and shade on specified locations internal /external surface in plane, curved / any geometric shape as recommended by approved manufacturer, to perfect line, level, plumb including finishing with sharp edge at corners, nitches etc.all as per manufacturer's recommendations and specification or as directed by EIC, including all labour materials, scaffolding, double height staging, if required & surface preparation etc. all complete at all heights, leads, location and lifts as specified in drawing and as directed by the EIC. Note:- Finished surface area shall be measured for payment.

Synthetic plaster of approved single colour, shade & texture

Brick patttern/wooden texture design/multidesign or any approved design over exposed plaster surface

Providing & applying textured finish paint of M/s Asian paint/Burger/nerolac/heritage or approved equivalnt over MS structural work/steel pipes/Concrete Surfaces finished with stucco spray finish in Grey colour/Granite stone/wooden trunk finish Texture plaster finish or any other approved finish applied over putty over a coat of anticorrosion paint including all labour materials, scaffolding, double height staging, if required & surface preparation etc. all complete at all heights, leads, location and lifts etc complete as per specification, drawing & as directed by EIC

Designing,fabricating (Laser Cutting), Erecting & fixing Metal Art work / Pictograms of approved design made out of 5 mm thick M.S sheet of requied size fixed over MS gate. The entire assembly is painted with black matt finish/Gold paint or approved finish over a coat of anti corrosive paint of zinc chromate primer.The rate shall include one coat of zinc rich primer after properly cleaning the steel surface with wire brush and mild acid solution followed by washing with water and drying the surface completely. The rate shall be also inclusive of suppying, cutting, welding gas cutting wastages and staging for erecting etc complete as per specfication, drawings & as directed by EIC

Providing & fixing stainless steel pipe hand rail in circular / Square / Rectangular/ any other approved shape & size for support & safety of skate learners, at Staircase, lobby, at all floors & levels conforming to 310 Grade of steel,of Schedule 10-S, All as per pattern &design shown in drawing including necessary S.S bend,tees, welding / nut-bolt necessary anchoring polishing and fixing in concrete/brick wall with S.S lugs, making pockets,concreting, making good the surfaces etc. as per specifications drawings and as directed by the E-I-C.

Providing and laying stone pitching 230mm thick using spotless stones includingpreparation of surfaces, cutting, levelingand dressing the undulations, setting thestones to proper slopes etc. including grouting the joints in stone pitching with CM 1:3 and pointing the surface with same mortar, fixing weep holes(to be paid separately under relevant item), placing projected stones for foot hold whereve required etc. completeall as per specifications, drawings and asdirected by EIC.

Designing, providing, applying Artistic paint work using approved acrylic paints of approved picture in various sizes over the existing walls including all as per manufacturer's recommendations and as per the approved sample including providing necessary scaffolding,cleaning the surface with water to remove all coating, dust, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications , drawings and as directed by Engineer in Charge

Supplying, staking and spreading good quality red garden soil of approved lot free from stones, pebbles, etc. required for plants, lawn etc. at the site including all leads, mechanical trasportation etc. completed as directed by Engineer-in-charge Note :- Measurement will be as per truck body dimensions without any deduction of any voids.

Providing and fixing Basket Ball pole + Ring + Basket Ball Board as per Basket Ball Federation of India BFI. Made of heavy iron 6 inch diameter with 5 mm WT middle support of 60 mm diameter 4 mm WT/ as required. Ring: Supply & fixing of basketball Ring made of heavy Iron MS bar (solid).Basketball Board: Supply & fixing of basketball boards acrylic made without any water Mark/ scratch , water proof/weather proof. Standard size 180x 105cm, 20mm Thick, covered with angle iron all around 35 mm x 4 mm with computerized lining of paint and tapered / chrome plated Nut bolts are used to fix the angle iron support. All M.S. members to be epoxy paint of approved colour/ as per standard complete all as per specifications and as directed by the Engineer-in-charge.

Removable / Fixed Volley Ball pole with suitable fixing arrangement on ground and net with tying arrangement complete as per Volley Ball Federation India complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-inCharge:

Providing and laying in position Grossy reflective finish precast hydraulically pressed Heavy Duty smooth finish concrete designer tiles of 30 mm thick of M/s. Super Tiles or M/S Basant beton of requird size, pattern & colour(s) in flooring, ramps/ footpath laying of tiles overand including 20 mm thick cement mortarbedding of 1:4 mix, close jointed,grouting/double grouting of joints with matching cement slurry, finished to level, slope& plumb as required, curing including cuttingof tiles as required, wastage etc. includingfinishing top with two coats of lacquer finishetc. complete all as per specifications, drawingsand as directed by the Engineer in Charge.

Providing and fixing 60 mm thick (min) factory made Grossy reflective finished interlocking paver blocks (grade of cement concrete M- 35) of approved colour, shade, size & shape including supplying & laying stone dust evenly spread over the sub base of required thick including consolidation of sub base, properly vibrating with the surface vibrater, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface and including removing existing Shahabad stone / paver block and storing serviceable material and disposing off debris and unserviceable materials outside colony etc complete all as per specifications and as directed by the Engineer in charge.

Providing and fixing 80 mm thick factory made Grossy reflective finished interlocking paver blocks of approved make, colour, shape laid in pattern manufactured with cement concrete grade not less than M-40, including supplying & laying 50 mm thick stone dust evenly spread over the sub base including preparation & consolidation of sub base, and vibrating the paver block surface with surface vibrator, finished in line, level and filling the joints with fine sand and removal of excess sand, cleaning the surface complete all as per specifications and as directed by the EIC.

Supplying, fabricating and fixing in position at all floors Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivet joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufactures for following types with extruded sections of Jindal / Hindal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.

Providing & fixing ordinary plain / frosted / Bajara sheet glass/ for MS openable/louvers or aluminium sliding windows , glass doors, vision panels etc of approved make of following thickness in various sizes as required at site, using first class glass oil putty of approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading, EPDM gasket etc with necessary screws, nails etc (as required). at all floors & locations including cutting the glass to required size, removing the existing broken / damaged glass panes from windows / doors / partitions etc. along with its old oil putty/gasket /beading etc. carefully and disposing off the un-serviceable material with in colony including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-Charge.

5 mm thick plain glass with EPDM gasket for Aluminium windows.

Providing and fixing precoated with high durable polyester paint G.I CRCA 0.5 mm (min) thick steel sheets manufactured by M/s. Essar/ Jindal steel sheets make in SR-25 module of Stucco fixing over RCC roof on M S frame at all floor and locations,including bending at required angle, including necessary ridges and gable ends, valley and over lapping shall be 200 mm, fixing the sheet with self tapping SS Screws fixed with machine with bituminous washers/ GI bolt of 8 mm dia. The base metal shall be CRCA Steel having minimum yield strength of 240 MPa and minimum UTS of 280 MPa, Galvanized to 120 gsm zinc coating mass (total both sides) as per I S: 277 or conforming to AS: 3566 Class 3 of rust shield/ corroshield make including grouting over RCC slab/ columns/ Cast- in- situ PCC blocks in line level and level, at all levels including necessary scaffolding etc.

Relaying of top surface of junior collage football ground, Long jump court, High Jump court, Mallakhamb court, Kabbadi court & vollyball court by following following procedure including all materials, sand, red earth, clay, power roller etc. completed all as per specifications, requirements and as directed by the Engineer-in-charge (Excavated area will be measured for payment) 1) Excavation of earth in required area and depth. 2) Mechanical Screening of excavated earth as per requirements 3) Mixing of Screened earth with approved River sand & Red soil in the ratio of 2:1:1 4) Spreading and laying of mixture in layers 5) Rolling of area with power roller, watering, consolidation to obtain 90% proctor density etc 7) Disposal & levelling of surplus earth within Anushaktinagar

Removing & refaxing of existing gate including cutting, fabricating, welding, erecting, making holes/chases wherever required and fixing/embedding in position in concrete/brick work with necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding complete as per specifications, drawings and as directed by the Engineer in charge.

Levelling and dressing by using JCB to level the surfaces including dry plants, stone, earth, etc. complete all as directed by Engineer-in-charge.

Mirror polishing for existing kotah stone flooring and skirting at all floors & locations using polishing machine to give figh gloss finish, including disposal of debries outsdie colony etc. complete all as per specification and as dredcted by the EIC

Providing, laying and fixing in position thikness mentioned below , machine cut and mechine polished (mirror polish) granite stone of approved colour /shade in flooring /skirting/cladding/ treads/risers cills etc. at all locations including necessary mortar bedding /backing close jointed and grouted with matching cement slurry and finished to line, level, etc, as required including cutting of stone slabs, wastage, making cutouts, required pattern in plain ,curved or any geometric shape and design wherever required all as per specifications , drawings and as directed by the Engineer in charge. i) 25mmthk. granite stone of approved colour including 20mm thick cement mortar bedding of mix 1:4 (1cement : 4sand) including grey cement slurry at 4.4kg / Sqm over bedding and matching slurry with cement at 2.2kg/sqm for grounting the joints.

Shifting of existing porta cabin to desired location within Anushaktinagar using Hydra & Truck

Moulding and fixing of GRC columns as per approved drawing, complete all as directed (Outer dimension of columns will be measured for payment)

Painting of surfaces with two coats of premium quality acrylic emulsion paint of approved make & shade over two coats of approved primer consist of thoroughly scrapping, applying a coat of approved cement primer, filling upthe cracks with approved crack filling compound, applying approved stucco putty to entire surface to fill up crevices, mild depression etc. including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris within colony etc. complete all as directed by the Engineer-in-Charge.

Removing of existing dislocated/settled CC interlocking paver blocks from footpath, stacking the same, Re-laying those cement concrete interlocking paver blocks in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Painting of two finish coats of exterior grade water based all weather paint of approved colour & pattern after washing the foopath with water jet pump to removed all girt, greese, dust etc complete all as per manufacturer specificaions & as directed by the Engineer-in-Charge.

Supplying, staking and spreading good quality river sand of approved lot free from stones, pebbles, etc. required for filling / spreadng at the site including all leads, mechanical trasportation etc. completed as directed by Engineer-in-charge Note :- Measurement will be as per truck body dimensions without any deduction of any voids.

Providing and laying Heavy duty outdoor/exteriro grade Vitrified tiles of approx size of 400 mm X 400 mm of first quality of M/S H&R JHONSON (INDIA) Ltd or M/s Kajaria or other equivalent approved make of approved colour, shade, pattern and of 12mm thickness or as per manufacture's specifications, fixed over 20 mm thick backing using ready mix cement mortar 1:3, close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage and final cleaning of surfaces as required, curing etc. complete all as per specification, relevent IS code & as directed by the EIC.

Painting of trees bottom trunk surface around the Girth by white wash & geru paint in 2 coats by adding fevicol for 1 meter height (0.6 M height with geru & above 0.4 m height white wash) for tree trunk surface, with best quality of white wash & geru powder mixing with chlopriphos @3 ml/lit & copper sulphate @4gm/lit including the cost of labour, material & tools etc. complete all as per specification, & as directed by the EIC.

Reliable Enterprises

Reliable Enterprises