SPECIAL REPAIRS TO MT GARAGE P-55, P-60 AT INS UTKROSH AND CERTAIN SANCTIONED WORKS UNDER GE MINNIEBAY, PORT BLAIR

Amount

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed..

M&L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering to concrete or block masonry surfaces or surfaces on fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under respective item.

Supply only integral water proofing compound [ISI marked] of approved make.

Prepartion of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over and including alkali resistant primer etc complete all as specified and as directed.

M&L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for applying two or more coats of cement based Wall Care Putty on old/new plastered surfaces of walls ,including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M&L for preparing newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed.

M&L for Complete removal of existing treatment of any description on walls and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described exceeding 10 cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of ceiling boards any description not other wise described over 10 cm width or girth and applying one coat of plastic emulsion paint complete all as specified and directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Refixing in the same opening of shutters of any description exc 1 and n.exc 2 Sqm each complete all as specified and as directed.

S&F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain (Rudraksh) colour PVC sheet reinforced with MS square tube as per specification & drawing, shown as SSR Part II complete all as specified and as directed.

S&F for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain (Rudraksh) printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900)and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F of second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F of aluminium 'XPM' of size 3.00x1.5mm x 22 gauge and fixed with aluminium wire staples or wooden beads complete all as specified and as directed.

S&F 100 mm size, medium weight Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21including fixtures complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S&F Floor Door Stopper of size 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.

S&F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed

S&F in repairs 100 mm size, Butt hinges, Extruded Aluminium alloy with galvanised mild steel hinge pin, anodised, Type B-21, including fixtures complete all as specified and as directed.

S&F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs anodised aluminium 'XPM' 3.00x1.5mmx22 gauge size for mosquito proofing and fixed with aluminium wire staples with existing or new wooden beads complete all as specified and as directed.

Dismantling boarding including partition, any description, fixed in any position with screws complete all as specified and as directed.

S&F for 19mm thick Plywood, Grade BWP, Type BB, fixed with screws to Wooden Frames complete all as specified and as directed.

S&F for 0.90 mm Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

S&F in repair Second class hard-wood clean sawn in scantlings framed and fixed complete all as specified and as directed.

S&F Butt hinges 100mm size, extruded brass, with mild steel hinge pin, bright polished and fixed.

S&F 100 mm size extruded brass handles, fabricated type polished and fixed complete.

S&F aluminium fanlight pivot/catcher with plate size 20mmx 50 mm and suitable for shutter of 25mm thickness and fixed.

S&F in repairs curtain rod aluminium , 25 mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 as in bed plates, kerbs, hold fast concrete etc complete all as specified and as directed.

S&F Anodised Aluminium frames for doors, partitions, Windows and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton doors, windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium anodised XPM of size 3.00x1.5mmx22 gauge, sheet glass, aluminium grill and particle board fixed to aluminium frame all as specified and as directed. NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges etc. (ii) 5mm thick sheet glass, aluminium grill, particle board and aluminium XPM shall be measured and paid separately if necessary as supply and fix rates under respective items. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

S&F of 5mm Plain sheet glass complete all as specified and as directed.

S&F of 5mm figured glass complete all as specified and as directed.

S&F aluminium anodised grill DG (102) (10mm in width) of DECO grill wt not less than 3.26Kg/Sqm, any make as specified and directed

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M&L for Non Skid Ceramic tiles, Coloured of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Non Skid Ceramic tiles, Coloured of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed Ceramic Tiles, Coloured of size 450X 300X 7 to 8mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed..

M&L for Chequered Cement Concrete Tiles 300 mm X 300mm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors / vertical surfaces / risers / bullnosed treads with gray cement including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in sub-base of flooring, hardstanding/plinth protection etc surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repairs Vitreous China Squatting Pan "Orissa pattern" size 580mm x 440mm white with integral foot rest etc. (excluding cistern and flush pipe) including S or P Trap & Provision of concrete bedding and making good to floor all as specified and as directed.

S & F in repairs Vitreous china wash down water closet [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs 10 Liters capacity, PVC valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S&F in repairs Vitreous china ware wash hand basin, white, flat back of size 550mm X 400mm including Pillar Tap, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure and brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe etc complete all as specified and as directed.

S&F in repairs 75mm dia out let, PVC (SWR) multi-floor trap with square grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

S&F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down take pipes complete all as specified and as directed.

S&F in repairs 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Taking up or down old/ chocked water tubings 15mm bore with fittings from trenches/ walls and stacking at site including cleaning for refixing in new or old position or credit to contractor all as directed.

Taking up or down old/chocked water tubings 20mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor all as directed.

Taking up or down old/chocked water tubings 25 or 32 mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor all as directed.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

M&L Cutting chases, pinning in, in existing stone concrete blocks, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc. and making good, cutting n.exc 10cm girth complete all as specified and as directed.

S&F in repairs, 15 mm bore Stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe or for unions.

S&F in repairs to Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed. Make: Cat No. 5053N of Jaquar or equivalent make mentioned in PS.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S&F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for embedded in PCC/ brick work complete all as specified and as directed.

S&F for Mild steel Rolled section/ Tubular MS pipes as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe.410-W, Gde-E-250 quality-A complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof covering, etc. including ridge complete.

S&F 0.50mm thick Pre-Painted Galvatume Aluminium Zinc Coating GI based Corrugated steel sheet of any colour having tensile strength of 550 MPA yield strength in any profile & pattern in Roof covering fixed with self tapping screws complete all as manufactures instructions and as directed by Engineer- in -Charge. Note : Overlap shall be as specified by manufacturer.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covring/cladding to wall, ridges, hips, valley gutter, drip and straight flashing fixed with self tapping screws of size 50/75mm and aluminium washer of suitable size complete all as per manufacturers instructions and as directed. Note : Overlap shall be as specified by manufacturer.

S&F Aluminium flat, wind ties of any size fixed with self tapping screws of width 40/50mm and 6mm thick with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S&F for Aluminium snap grid frame work of 605 X 605 mm panel size for false ceiling with Aluminium "T" section of size 38 X 25 X 1.50 mm thick for Main Runners, 25 X 25 X 1.5 mm thick for Cross Runners and Angle of size 25 X 25 X 1.50 mm thick along the Walls suspended with and including 4 mm dia, Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position, supply 4 mm thick non asbestos fiber cement "E" Board and fixed with aluminum staples on snap grid as per manufacturer's specifications incl preparation of new surface of ceiling boards and applying two coats of oil bound distemper over a coat of primer of approved make including taking down existing false ceiling with frame work of any type complete all as required at site and as directed.

S&F Rolled sections of Fe-290 (gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for rolled section of Fe-290 (gde E-165) for roof trusses (framed), trussed and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pirces, cleats etc complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per previous item i.e. item 88 but applying two coats.

M&L preparation of old wall surface applying one coat of oil bound distemper on old wall surfaces complete all as specified and as directed. Note: Rate Quoted inclusive of scaffolding at any height.

M&L for preparation of old wall surfaces and applying two coats of oil bound distemper on walls all as specified and directed. Note: Rate Quoted inclusive of scaffolding at any height.

M&L for preparation of old plastered wall surfaces and applying one coat of acrylic wheather coat emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed. Note: Rate Quoted inclusive of scaffolding at any height.

Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar,1:6 complete Type C1, 1:3:6 (20mm graded aggregate) straight or curved on plan exceeding 6 m mean radius complete all as specified & dirceted.

S&F Mild steel screw bolts with neck diameter in 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 10cm and n exc 15cm long complete all specified and as directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted or welded Fe 290 (gde E-165) complete all as specified and as directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 (Gde E-165) complete all as specified and as directed.

Refixing old sheets after taking down all as per item no 80 above.

M&L water proofing treatment of external walls by applying two coats of elastomeric acrylic coating material after cleaning the surface thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturer’s specifications and directions of Consultant/Architect. Make : DR Fixit or equivalent. Note: Rate Quoted inclusive of scaffolding at any height.

Demolition of unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] complete all as specified and as directed.

M&L for cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in floors finished fair and even all as speciifed and directed.

M&L for PCC Type C-2 1:3:6 using 40 mm graded aggregate in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/sqcm in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed. Note: Design mix in this regard shall be got approved by GE.

Forming Contraction (Dummy) joints 30mm deep and 8mm wide, filled with and including sealing compound of grade-B complete all as specified and as directed.

Taking down carefully old Copper point wiring complete for one light/ fan/ socket out let point and removing material from site incl fiitings/ fixtures and making good the disturbed surfaces complete all as specified and as directed.

M & L point wiring with 1.5 Sq.mm (nominal area) pvc unsheathed multi strandard copper conductor pvc insulated 1100 volt FRLS grade multistranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface,in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:- (a) One light /fan point controlled by one switch

(b) One 5 Amps plug point independent board controlled by one switch

(c) One three pin switch socket 5 Amps plug point on same board

All as per item No 108 herein before but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independant board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed.

S&F socket outlet 2/3 pin 5 Amps 240 volts flush type complete all as directed.

S&F socket outlet 3 pin 5/15 Amps 240 volts flush type complete all as directed.

S&F switches 6 Amps 240 volts flush type complete all as directed.

S&F switches 15 Amps 240 volts flush type complete all as directed.

S&F ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark.

M&L in repair for sub main wiring of two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn into and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly size on :- (a) 2.5 Sqmm (2 single run of 2.5 Sqmm for phase and neutral and one run of 4 Sqmm as earth wire)

S&F in replacement sheet enclosure with category of protection double door type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts 4 way,all as specified and directed. Note: Sheet metal enclosure for MCB distribution board shall be fixed in the wall such that front cover shall be seen flush with the wall surface.

S&F MCB triple pole and neutral 63 Amps working on 415 volts 50 Hz AC supply,10 KA C series including taking out old one.

M&L MCB single pole 6 to 40 Amps working on 240 volts 50 Hz AC supply,10 KA C series .

S&F in replacement of LED tube light fitting, 1x20 w, 230v Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed. Make: Cat Pat No. BN308C LED 20S -6500 L 60 PSU WH of Phillips or equivalent makes mentioned in PS.

S&F in security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting all as specified and as directed Make: Philips cat part no BRP022 LED 20 CW MR S1 PSU GR or Havells cat part No LHETAXU7UN6W024 or CG cat part No LSTN-30-CDL.

Suppy & laying in repairs and testing cable XLPE insulated, screened, PVC bedded, aluminium conductor, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25Sqmm 4 core, laid in duct/ fixed on wall/ trenches complete all as specified and as directed.

Excavation in soft and loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed by Engineer-in-Charge

Returning filling soft & loose/hard & dense soil including spreading leveling, watering and well ramming in layers n exc 25 cms all as specified and directed by Engineer-in-Charge..

Removal of excavated material n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point all as specified and directed by Engineer-in-Charge.

Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polethylene including couplers, bends, cap etc. with smooth internal and profiled external surface for non pressure under ground cable complete all as secified.

M&L as in repair for earth continuity conductor or main earthing lead of 25x3mm galvanised iron (made of porcelain insulators) fixed at a distance 300 mm with screws etc for roof conductor and down conductor above ground on wall/ roof or buried in ground or inter connected etc complete all as specified and as directed.

M&L as in repair for earth continuity conductor or main earthing lead of 20x3mm Copper Strip (made of porcelain insulators) fixed at a distance 300 mm with screws etc for roof conductor and down conductor above ground on wall/roof or buried in ground or inter connected to GRID System any position including taking down old unserviceableone etc complete all as directed.

Earthing complete with Copper earth plate electrode 60cm x60cm x3.15mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Copper earth lead 25 x 3mm , by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 40mm bore light grade from earthing test point or main controling switch as directed including providing funnel with 20mm bore GI pipe light grade, wire mesh,charcoal or coke andcommon salt in alternative layer of 15 Cm (compactedd thickness) all round the earth electrode,concrete earth pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 50mm thick cover of RCC (1:2:4) (re-inforced with 8mm dia TMT bar @15 cm C/C bothways and MS bar handle made of 10mm dia bar) including necessary earth work in excavation,returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of MES Schedule Part-I including earthing pit cover etc. complete all as directed.

Earthing complete with GI earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the GI earth strip 32 x 6mm , by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 40mm bore light grade from earthing test point or main controling switch as directed including providing funnel with 20mm bore GI pipe light grade, wire mesh,charcoal or coke andcommon salt in alternative layer of 15 Cm (compactedd thickness) all round the earth electrode,concrete earth pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 50mm thick cover of RCC (1:2:4) (re-inforced with 8mm dia TMT bar @15 cm C/C bothways and MS bar handle made of 10mm dia bar) including necessary earth work in excavation,returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of MES Schedule Part-I including earthing pit cover etc. complete all as directed.

Supply and fixing of Copper air terminal rod 15mm dia and 1000mm long Copper lightning arrester including poviding with accessories to fixed at the existing position top of the roof level etc. all as directed.

S&F in repairs of GI Tubing 40mm dia light grade laid in trenches for protection of earthing strip all as specified and directed.

M&L for cement concrete in foundetion type C-2 1:3:6 using 40mm graded stone aggregate.

M&L 10mm thick cement plastering in cement mortar 1:6 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Kamal Electrical

V CHINNA DURAI

bansal construction

AR CONSTRUCTIONS

RAINBOW INTERNATIONAL

M/s Pintu Furniture

RS ENGINEERING WORK