REPAIR AND MAINT OF INTERNAL ROADS INCLUDING ROAD FURNITURE UNDER AGE B/R AT GE (U) MEERUT CANTT

Repair to pot holes any depth not exc. 1 sqm each incl sweeping free from dust and mud or water, scoring sunken surfaces in roads etc. cutting around edges to at least 25mm in depth and making good by applying tack coat of paving bitumen 5 kg per 10 sqm surface area , putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10 sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified & directed.

Material and labour for preparing of existing black top surface by brooming or brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dust etc and Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.

Material and labour Bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.00% binder content of paving bitumen (VG-30 Gde) by weight of total mix,mixed in hot mix plant and laid by using self propelled mechanical paver , rolled and compacted with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and directed. Note :- The minus price adjustment for less quantity of bitumen shall be made @ Rs. 50.00/Kg complete all as specified and directed.

Repairs to existing damaged/broken bituminous road surfaces in patches using bituminous macadam including brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG 10 (80/120 grade) @ 5 Kg per 10Sqm of road surface and laying premixed bituminous macadam using binder (Bitumen VG-10 grade 80/120 ) contents @ 4 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface etc, complete all as specified and directed

M&L for preparation biruminous surfaces of road and marking 2.5 mm thick cenrtre lines, stop lines, dashes, arrows etc. and the like n exc 10 cm wide on roads pavements with hot applied thermostatic road marking paint of approved colour confirming to BS 3262-1989 with special applicators machine all as per manufacturers instructions complete all as specified and directed

S & F in repair Solar stud with 3 LEDs of red/yellow colour on each side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of size 125x125mm with built in stem of suitable length with LEDs, solar-cells, battery & light sensor duly covered with tough unbreakable polycarbonate transparent sheet on top. Equiped with solar system workable for 2-3 days (night) after full charge of 8-10 hours, fixed on road surface by cutting hole and grouting with epoxy all as per manufacture's instruction, etc complete all as specified and directed.

S & F in repair MS dual rectangular delineator having dimension of 100x1100x20mm approx weight 2-3 kg ,3M dimamond grade type XI DG3 reflective sheet of high intensity reflector (white/black) . All steel parts powder coated to make all weather resistant, including excavation in any strata and embeded in PCC 1:3:6 type C-2 of size 30cm x 30cm x 20cm, etc complete all as specifeid and directed.

Supply and fixing cat eye reflective type of plastic body size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F Convex Mirror 800mm dia is used at any kind of blind turns,its used of roads and parking where it is not possible to see the other side of the road because of the blind turn Unbreakable Convex Mirror Very Durable complete all as specified and directed fixed with PCC 1:3:6 incl excavation of post hole size 60x60x90 CM complete all as specified and directed.

S & F in repair Solar road delineator with 6 LEDs of red/yellow colour housed in plastic body with LEDs, solar-cells, battery and light sensor well protected in polycarbonate sheet; device protected with powder coated wire mesh cage, equipped with solar system mounted over 47mm dia steel tube powder coated of length 1000mm having sheet foot for firm grip to ground. Delineator to have addational reflective bands. Equiped with solar system workable for 2-3 days (nights) after full charge of 8-10 hours, including excavation in any strata and embeding in PCC 1:3:6 type C-2 of size 30cm x 30cm x 20cm, etc complete all as specifeid and directed.