GE(W)HSR-33/20-21 REPAIR / CLEANING OF SEWAGE LINES AND DRAINS OF ZONE A AT HISAR MIL STN UNDER GE(WEST) HISAR

Amount

Attending day to day complaints for cleaning of Blockage from floor/Nahani trap, soil waste pipe, WC, chocked rain water pipe etc upto and including 1st manhole and removing sludge water/waste upto 500 metre distance and keep the Sewer Line functional complete all as directed by Engr-in-charge.

Note for item No 01 : - (i) The unit rates quoted in above items shall deemed to be included for removing of solids, liquids and sludge etc of any description from manholes (ii) OTM & MD accn of Offrs and JCOs/OR and all other type of accn in Zone 'A' under AGE B&R I at Hisar Military Station (iii) All indls will be reported at complaint cell of AGE B&R I of GE (W) Hisar alongwith a supervisor deputed by contractor to JE (Civ) concerned will take attendance. on daily basis. (iv) In case of any complaint is not attended by contactor withing 24 hours of reporting, then compensation @ Rs. 50.00 (Flat rate) will be deducted and Rs. 20.00 extra in addition to initial penalty of Rs. 50.00 for each further 24 hours delay.

Cleaning of underground sewage line of any type and size up to including 200mm dia including manhole upto 3m depth all in working/ running condition involving removal of blockages of any kind in man holes or sewage lines by means of steel rod/bamboo rod wherever cleaning machine not approachable including desluding descaling and dechoking of line wherever required, flushing the entire stretch with water, making the stretch clean, functional and removal /deposition of sludge inclusive of solids of any type and sludge water to a distance exceeding 1.5km but not exc 5km and covering the entire sludge & solids with local earth complete all as specified and directed. Notes :- In case of any complaint is not attended by the Contractor within 24 Hours of reporting, then recovery @ Rs 50/- per complaint and thereafter Rs 20/- per complaint for every 24 hours further delay shall be imposed on the contractor.

M&L for Cleaning/ clearing of underground sewage line of any type and size upto 200mm dia of pipe including manholes of any depth and cleaning any type of blockage including desilting, descaling and dechocking of sewer lines and manholes hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of min 5000 ltrs and suction tank of capacity of 300 ltr and 260 LMP with min 145 bar, suction flow of 10200 LPM including skilled labour driver and operator supervising Engineer for cleaning of sewage line and also water provided for jetting and removal of sludge/ silt/ liquid/sewage water/mud and sand (works in foul condition) etc and flushing after cleaning including removing all the sludge water/waste materials and removing the same to a distance exceeding 2.0KM but not exc 2.5KM all as directed by Engr-in-Charge.

Note for item No 03 : - (i) Necessary precaution as well as safety measures shall be taken by the contractor without any extra cost for working in the foul condition. (ii) The Contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and / or to other equipment / machinary/ material at the site of work during the execution. (iii) The work shall be executed with all safety measures under the supervision of highly skilled workman/ supervisor using Combined High Pressure Water Jetting cum Suction machine If the contractor fail to bring the machine. (iv) In case of any complaint is not attended by the Contractor within 24 Hours of reporting, then recovery @ Rs 50/- per complaint and thereafter Rs 20/- per complaint for every 24 hours further delay shall be imposed on the contractor.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5m but not exceeding 3m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up /Sewage /drain pipes (SGSW, AC or RCC / PVC) of 150mm/200mm, dia of pipe set in cement mortar complete all as specified and directed.

Supply and fixing 150mm dia (6") PVC pipe of working pressure of 4kg/cm2 single socketed in any length and jointing pipes with adhesive solution laid in trenches or in floors complete all as specified and directed.

Supply and fixing 200mm dia (8") PVC pipe of working pressure of 4kg/cm2 single socketed in any length and jointing pipes with adhesive solution laid in trenches or in floors complete all as specified and directed.

Supply and fixing Reinforced concrete pipes, class NP3, 150mm bore, laid and including jointing of pipe in CM 1:1 complete with collars complete all as specified and directed.

Supply and fixing Reinforced concrete pipes, class NP3, 200mm bore, laid and including jointing of pipe in CM 1:1 with collars complete all as specified and directed.

M&L for Concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for NP3/PVC pipes complete all as specified and directed.

M&L for Concrete bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for NP3/PVC pipes complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 including Demolition of Brick work or stone / boulder masonary built in cement mortar incl all quoins, arches, pillars etc all as specified.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removing rubbish complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Racking out joints/ Pointing to brick work in wall or bricks on edge in floors, surface channels, drains, roofs etc in cement mortar 1: 3 finished even and smooth complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete incl demolition of old cement concrete etc complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:4 including necessary use and waste of formwork and including demolition of existing RCC cover slabs complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars upto 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for cleaning of Drains of any size (Wide) and any depth including removing of all sludge, mud, foreign material, sand, ashes, fibre, silt, grease, night soil, grass, small bushes etc and removing the taken out sludge /material , water/waste upto 500 metre distance complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

virendra constructions