REPAIR REPLACEMENT OF WOODEN AND STEEL FURNITURE AT BHUBANESWAR, PARADIP AND GOPALPUR AREAS

Amount

Repairs to " Metal Chairs With / With out arms non revolving and nontilting type equivalent to DRG No: FD-75 (M) and Chair CB Steel with/With out Arms (Drg No:- FD-75M) and replacement of components as shown in drawing complete all as specified and directed by Eng-in-Charge:-

Material & Labour for replacement of unserviceable seat / back seat of chairs of size (W- 535 X D- 560 mm) with new seats made of Ist class hard wood and including caning on wooden frame of size (40 X 20 mm) in Godrej pattern with 2 mm wide plastic cane and 4mm for boarder mm including applying two coats of French polish on exposed surfaces and fixing with 04 nos of nots and bolts complete all as specified and directed by Engr-in-charge.

Material and Labour for replacement of new 50 X 25 X 3 mm Flat iron plate including necessary welding and fixing to the steel frame below the front and back rail of seat complete all as specified and directed by Eng-in-Charge.

M&L for replacement of unserviceable hand rest of chair CB with arms / Metal Chairs with arms non revolving and non adjustable with new handle of size 430 x 55 x 25 mm long made of 1st class teak wood duly polished with two coats of french polish complete all as specified and directed by Engr-in-charge.

M&L for replacement of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge.

M&L for replacement of unserviceable 80 mm GI nuts and bolts as per drawing.

S&F for replacement of unserviceable PVC/rubber stopper for 20 mm dia ms tube.

Repairs to "Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 ) and replacement of components as shown in drawing complete all as specified and directed by Engin-Charge:-

Material & labour for replacement of old unserviceable top of OSD Exterior Grade one side Teak wood finish other side balancing White of size (1200 X 600) with new 18mm pre-laminated paritcale board top including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-.

All as per Item No. 2.01 above but of a single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge.

All as per item serial no 2.01 but new Mild Steel Lock of 06 lever.(Godrej Pattern)

All as per item Sl No 2.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 25 Sq mm Leg) with 0.5 mm thick 25 Sqmm metal plate inside the shoe/ leg cap.

Repairs to "Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 ) and replacement of components as shown in drawing complete all as specified and directed by Engin-Charge:-

Material & labour for replacement of old unserviceable top of OSD Exterior Grade one side Teak wood finish other side balancing White of size (1500X900) with new 18mm pre-laminated paritcale board top including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-.

All as per Item No. 3.01 above but of a single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge.

All as per item serial no 3.01 but new Mild Steel Lock of 06 lever.(Godrej Pattern)

All as per item Sl No 3.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 25 Sq mm Leg) with 0.5 mm thick 25 Sqmm metal plate inside the shoe/ leg cap.

Repairs to " Almirah Steel Large with shelves (Drg No FD-1031)" & replacement of following components as shown on drg complete all as specified and directed Eng-in-Charge :-

Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of a coat of red oxide primer as per drawing.

All as per Item No. 4.01 above but 5mm long welding to damaged/decayed steel frame with arc welding as per std workmanship.

All as per Item No. 4.01 above but two way locking system with MS rod (with out Lock) .

All as per Item No. 4.01 above but of 150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge.

All as per item serial No 4.01 but new Stainless Steel Lock of 06 lever (Godrej Pattern)

Repairs to " Almirah Steel Small with shelves (Drg No FD-1032) " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of one coat of red oxide primer as per drawing.

All as per Item No. 5.01 above but 5cm long welding to damaged/decayed steel frame with arc welding as per std workmanship.

All as per Item No.5.01 above but two way locking system with MS rod (with out Lock) .

All as per Item No. 5.01 above but of 150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge.

All as per item serial No 5.01 but new Stainless Steel Lock of 06 lever (Godrej Pattern)

Repairs to " Locker Steel ( Drg No : CWE(P)V/SK/18) " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of one coat of red oxide primer as per drawing.

All as per Item No. 6.01 above but 5cm long welding to damaged / decayed steel frame with arc welding as per std workmanship.

S&F 100 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge.

S&F new Hasp and stapple chromium plated 75 X 40 X 3 mm

Repairs to " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17) & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable top of size (400 X 700) with new 18mm pre-laminated paritcale board top of OSD Exterior Grade oneside Teak wood finish other side balancing White including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-.

S&F Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 20 Sq mm Leg) with 0.5 mm thick 25 Sqmm metal plate inside the shoe/ leg cap (for 20 Sq mm Leg round type) ,complete all as specified and directed by Engin-Charge:-.

Repairs to " Chair Varandha Steel (Drg No : FD/MAP-II/06) " & replacement of following components as shown on drg complete all as specified and directed :-

Removing US PVC Back & seat (As per draing ) with 4MM TH. (RIBS ON BACK SIDE) (weight not less than 1.5 Kgs Each), M&L for refixing the new seat as per drawing as specified and directed by Engr-in-Charge.

All as per item Sl No 8.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/ Milad) Nylon PVC Shoes (for 20 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge

Repairs to " Chair Varandha Steel (Drg No : FD-359) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable plastic newar / Plastic cane of varandah Chair with plastic cane of 4 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per mat pattern & complete all as specified and as directed.

All as per item Sl No 9.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/ Milad) Nylon PVC Shoes (for 20 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge

Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable 12 mm BWR ply of size (850 X 1974)mm including necessary fittings.

S&F Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) Nylon PVC Shoes (for 38 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

Repairs to " Charpoy with hard top (FD: ED/MAP-II/01 " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable 12 mm BWR ply of size (838 X 1916)mm including necessary fittings.

S&F Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) (for 32 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

S & Fix 80 mm GI nuts and bolts for Charpy with hard top & Bed hard Steel in replacement of US, complete all as specified and directed by Eng-in-Charg.

Repairs to " Chair writing steel (FD: ED/E6/MAP/12 " & replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable Hand rest as per drawing with necessary fittings

S&F Rubber stopper for 25 X 10 mm cantilever type MS tube.

Repairs to " Chair Computer (FD: ED/E6/MAP/12) " and revolving chairs (TP) (Equivalent to Chair Computer )& replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for replacement of old unserviceable Hand rest as per drawing with necessary fittings

S&F Hydraulic System

S&F Bottom base with wheels.

Repairs to " Table Computer (Drg No FD-382) " & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 561X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak wood decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

All as per Item No.14.01 but US parts of computer table made of 18 mmth particle board .

S&F telescopic channel with necessary screws per drawing

All as per Item No.14.01 but Spining base (Legs) of computer table with necessary fittings .

Repairs to " Table bed side (Drg No FD/E6/MAP/15 (R) " & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable parts of the furniture of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade with 1mm th PVC beading, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable fancy handel with new SS handel inner locking type with washer.

All as per Item No.15.01 above but 06 mm BWR back ply of size (400 X 420) mm

S&F Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) (for 18 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

Repairs to " Table Steel 900 X 600 (Drg No FD-1007, FD-1008) " & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 600 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak wood decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of broken / damaged part of steel furniture made of 24 Sq mm pipe and S&F new 24 Sqmm pipe having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge.

M&L for replacement of broken / damaged part of steel furniture made of 25 mm dia MS tube and S&F new 25 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge.

Repairs to " Table Centre Drawing No FD- 274" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of Leg of size (30 X 60 x 400 mm) made of 1st Class seasoned teak wood,

All as per 19.02 above but long rail of size (20X 50 X 850) mm

All as per 19.02 above but short rail of size (20X 50 X 400) mm.

All as per 19.02 above but side/center stiffener of size (20 X 50 X 400) mm

Repairs to "Chair Dining Officers (Drg No : FD/MAP-II/04)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new front leg (35 X 50X 400) with 1st class seasoned teak wood all as specified and directed by Eng-in-charge

All as per Item No.20.01 above but rear leg of size 50 X 35 X 960 mm

All as per Item No 20.01above but side rail 35 X 65 X 450 mm

All as per Item No. 20.01 above but front rail of size 25 X 65 X 450 mm

All as per Item No.20.01 above but rear rail of size 25 X 90 X 450 mm

All as per Item No.20.01 above but back rest rail of size 45 X 25 X 450 mm

All as per Item No. 20.01 above but stiffener 20 X 25 X 450 mm

S & F for replacement of old unserviceable 75 mm thick 40 Density cushion of size 450 X 450 mm along with the fabric costing not less than Rs 270/- per meter along with re fixing with the plywood at bottom as per drawing all as specified and as directed by Eng-ic-charge.

Repairs to "Chair Dining OR (Drg No : FD-279 /228)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new front leg (55 X 30 X 500) with 1st class seasoned teak wood all as specified and directed by Eng-in-charge

All as per Item No.21.01 above but rear leg of size 55 X 30 X 890 mm

All as per Item No 21.01above but side rail 35 X 65 X 430 mm

All as per Item No. 21.01 above but front rail of size 35 X 65 X 440 mm

All as per Item No.21.01 above but rear rail of size 35 X 65 X 405 mm

All as per Item No.21.01 above but back rest of size 45 X 35 X 405 mm

All as per Item No. 21.01 above but stiffener 20 X 25 X 430 mm

S & F for replacement of old unserviceable plastic cane of Dining Chair of any type with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern & complete all as specified and as directed.

Repairs to " Table dining 6 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 1500 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of leg of Size 90 X 45 X 750 mm of 1st class seasoned teak wood.

All as per Item No 22.02 but long rail of size 90 X 45 X 1500 mm.

All as per Item No.22.02 above but short rail of size 90 X 45 X 900 mm.

All as per Item No.22.02 above but S&F new Stiffner of size 90 X 25 X 900 mm.

Repairs to " Table dining 4 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 1200 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of leg of Size 90 X 45 X 750 mm of 1st class seasoned teak wood.

All as per Item No 23.02 but long rail of size 90 X 45 X 100 mm.

All as per Item No.23.02 above but short rail of size 90 X 45 X 900 mm.

All as per Item No.23.02 above but S&F new Stiffner of size 90 X 25 X 900 mm.

Repairs to " Table Peg (Drg No FD-384) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 450 X 300 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of leg of 1st class seasoned teak wood of Size 30 X 50 X 380 mm.

All as per Item No. 24.02 but long rail of seasoned teak wood of size 20X40X450 mm.

All as per Item No. 24.02 but new short rail / Bottom rail of seasoned teak wood of size 20X40X380 mm.

Repairs to " Teapoy (Drg No FD-382) " & replacement of following components as shown on drg complete all as specified and directed by Eng-in-Charge :-

S & F for replacement of old unserviceable with new Top ( 450 X 600 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

M&L for replacement of leg of 1st class seasoned teak wood of Size 30x60x540 mm.

All as per Item No. 25.02 but long rail of size 20X50x600 mm.

All as per Item No.25.02 but short rail of size 20X50X450 mm.

All as per Item No. 25.02 above but bottom rail of seasoned teak wood of size 20X50X450 mm.

Repairs to " Table bed side (Drg No FD-76" & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable with new side of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 510 X 230 mm with 4mm teakwood beading 510 mm long, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable with new top/middle self / bottom of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 450 X 230 with 4mm teakwood beading 450 mm long, complete all as specified and directed by Eng-in-Charge.

All as per Item No.26.01 above but 06 mm BWR back ply of size (510 X 450) mm

Repairs to "Table writing (Drg No : FD-275)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 1145X 600 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

All as per Item No.27.01 above but teak ood leg of size 55 X 35 X 760 mm

All as per Item No 27.01above but Short/side/middle rail 25 X 50 X 600 mm

All as per Item No. 27.01 above but long rail of size 25 X 50 X 1145 mm

All as per Item No 27.01above but bottom rail 25 X 50 X 600 mm

All as per Item No.27.01 above but Stiffner (Foot rest) rail of size 50 X 25 X 1145 mm

S&F for replacement of old unserviceable parts of the furniture of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable parts of the furniture of 6 mm thick BwR Plyood, complete all as specified and directed by Eng-in-Charge.

Repairs to " Mirror with Shelf (Drg No FD-52 )" & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable mirror with new side of 5 mm thick mirror of size 355 X 455 mm, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable teak wood frame (Left / Right) with new frame of Size 25 X 19 X 475 mm, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable teak wood frame (Top/Bottom) with new frame of Size 25 X 19 X 375 mm, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable teak wood biding (Left/Right) with new biding of Size 12 X 12 X 475 mm, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable teak wood biding (TOP/ bottom) with new biding of Size 12 X 12 X 375 mm, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable shelf with biding with new shelf of Size 600 X 230 mm of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak wood decorative face and another side balancing white including 19 X 4 mm thick polished teakwood beading all roung, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable back plyood with new back plyood of Size 475 X 375 mm of 6 mm thick BwR Plyood along with key plate, complete all as specified and directed by Eng-in-Charge.

S&F for replacement of old unserviceable MS Bracket with new MS Bracket of Size 50 X 125 mm of 5 mm with necessary brass screws , complete all as specified and directed by Eng-in-Charge.

Repairs to " Teapoy Varandah FD-383)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 450 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed by Eng-in-Charge.

All as per item Sl No 29.01 but Rubber Shoes/Leg cap (of Make Saifix/ Susan/ FloraGreen/Milad) (for 20 Sq mm Leg) with 0.5 mm thick metal plate inside the shoe/ leg cap, complete all as specified and directed by Eng-in-Charge

Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge

Removing of broken / damaged part of steel furniture made of 25 X 3 Flat Iron of rectangular shape as 800 X 250 mm and S&F new as size and shape mentioned, as applicable to furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Eng-in-Charge

Repairs to " Chair Easy (Drg No FD-229)" & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable with new Front leg (55 X 23 X 543 mm)made of 1st class seasoned teakwood, as per drg or as per existing shape and size complete all as specified and directed:-

All as per Item No.30.01 above but rear leg 55 X 25 X 490 mm

All as per Item No.30.01 above but seat side rail of size 70 X 40 X 575 mm

All as per Item No.30.01 above but seat front side rail of size 55 X25X510 mm

All as per item No 30.01 above but Seat Back Side rail of size 55 X 25 X 510 mm

All as per Item No 30.01 above but back rest side rail of size 25 X 75X 450 mm including supports of size 20 X 15 X 450 mm

All as per Item No 30.01 above but back rest lower / upper rail of size 55 X 40 X 510 mm

All as per Item No 30.01 above but back rest side rail 50 X 25 X 510 mm

All as per item No 30.01 above but arm of size 610 X65 X 25 mm

S & F for replacement of old unserviceable plastic cane of seat/back of Chair Easy of any type plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and as directed.

Repairs to " Chair Writing (Drg No FD-280)" & replacement of following components as shown on drg complete all as specified and directed :-

Removing of old damaged front leg, S&F new front leg (30 X 55 X685) mm of 1st class seasoned teak wood including Polishing all as per drg and directed.

All as per Item No 31.01 but rear leg (30 X 55 X890) mm

All as per Item No 31.01but back rest rails ( 50 X 35 X 470) mm

All as per Item No 31.01 but seat side rail ( 30 X 65 X 470) mm

All as per Item No 31.01 but seat front rail (30 X 65 X 535) mm

All as per Item No 31.01but seat back rail (30 X 65 X 470) mm

All as per Item No 31.01but stiffener (25 X 20 X 470) mm

All as per Item No 31.01 but hand rest ( 25 X 60 X 470) mm

S & F for replacement of old unserviceable plastic cane of seat of Chair Writing of any type plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and as directed.

Supply , fixing & setting of 100 mm thick (40 density) foam cusion for each seat of Sofa set (FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed by Eng-in-Charge.

Supply , fixing & setting of cover of tapestry cloth (Cloth costing min Rs 300/ meter) of approved quality and providing zip excluding one side including white colour astra covering below cover for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed by Eng-in-Charge.

M&L for replacement of 6 mm BWR ply to subject furniture as per drawing complete all as specifice and directed by Eng-in-Charge.

M&L for replacement of 4mm ply BWR grade to subject furniture as per drawing complete all as specifice and directed by Eng-in-Charge.

S&F for replacement of old unserviceable with new Copper Oxidised Steel or Stainless Steel Pegs (Minimum 120 mm high & 75 mm wide) as per drawing to subject furniture as per drg complete all as specified and directed by Eng-in-Charge.

Material & labour for fixing of 4 mm th teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed by Eng-in-charge.

Material & labour for replacement of "Nylon Buffers " of Wooden furniture (Chair Dining offr, Chair Easy, Teapoy, Table Centre, Table Peg, Table dining, Table card etc ) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " Fancy MS Knobs powder coated " to be fixed from inner side with secres & washer of subjected wooden furniture (Table Writing, Dressing Table etc) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 75 mm fancy SS handels " to be fixed from inner side with secres & washer to subjected furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 100 mm long poder coated MS handel" to be fixed from inner side vith secres & washer to subjected furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed by Eng-in-charge.

Material & labour for fixing of " 70 X 70 X 40 mm wooden corner with 04 Nos of screws" to various wooden furniture, complete all as specified and directed by Eng-in-charge.

M&L for replacement of 18 mm thick prelaminated particle board exterior grade one side teak wood finish other side balancing white to subject furniture as per drawing complete all as specifice and directed by Eng-in-Charge.

M&L for removing old paint and dart from following steel furniture and apply one coat of spray painting of synthetic enamel paint over a coat of red oxide primer as per drg complete all as specified and directed :-

All as described at sl No 44 above for " Metal Chairs With / With out arms non revolving and nontilting type equivalent to DRG No: FD-75 (M) and Chair CB Steel with/With out Arms (Drg No:- FD-75M)

All as described at sl No 44 above for "Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) & Table Office clerk steel (FD-1004 )

All as described at sl No 44 above for "Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) & Table Office Officer Steel (FD-1002 )

All as described at sl No 44 above for " Almirah Steel Large with shelves (Drg No FD-1031)"

All as described at sl No 44 above for " Almirah Steel Small with shelves (Drg No FD-1032) "

All as described at sl No 44 above for " Locker Steel ( Drg No : CWE(P)V/SK/18) "

All as described at sl No 44 above for " Table Computer (Drg No FD-382) "

All as described at sl No 44 above for " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)"

All as described at sl No 44 above for " Chair Varandha (Drg No : FD/MAP-II/06) " & " Chair Varandha (Drg No : FD-359) "

All as described at sl No 44 above for " Teapoy Varandha Steel (Drg No : FD-383)"

All as described at sl No 44 above for " Metal Shelving Racks of Size 1875 X 900 X 500 mm"

All as described at sl No 44 above for " Metal Steel Shelving cabinets ithout Locker of size 1855 X 910 X 480 mm" equialent to Almirah Large Steel

All as described at sl No 44 above for " Metal Steel Shelving cabinets /O Locker of size 1155 X 760 X 480 mm" equialent to Almirah small Steel

All as described at sl No 44 above for "Table bed side steel (Drg No FD/E6/MAP/15 (R)"

All as described at sl No 44 above for "Rack Towel Steel "

All as described at sl No 44 above for " Step 02 tier "

All as described at sl No 44 above for " Screen Movable"

All as described at sl No 44 above for " Side rack with Tray "

All as described at sl No 44 above for " Stool Steel 2 feet high FD-81 "

All as described at sl No 44 above for " Table with drawer 600 X 900 FD-1008 "

All as described at sl No 44 above for " Table without drawer 600 X 900 FD-1007 "

All as described at sl No 44 above for " Table SS Top 4 Ft X 2 Ft"

All as described at sl No 44 above for " Almirah Large Steel 1/2 S 1/2 H "

All as described at Sl No 44 above for " RacK Shoe FD/E6/MAP/02/R "

All as described at sl No 44 above for " Rack Closed Type 04tier (910 X 380 X 1830 mm HFD-2069) "

All as described at sl No 44 above for " Rack Pegion Hole FD-1037 "

All as described at sl No 44 above for " Book Case Steel FD-1028 "

M & L for French polishing to wooden furniture after removing the dirt and dust and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed by Engr-in-Charge

All as described as per Item No. 45.00 hear-in above for " Table Centre Drawing No FD- 274"

All as described as per Item No. 45.00 hear-in above for "Chair Dining Officers (Drg No : FD/MAP-II/04)"

All as described as per Item No. 45.00 hear-in above for "Chair Dining OR (Drg No : FD-279 /228)"

All as described as per Item No. 45.00 hear-in above for " Table dining 6 person (Drg No FD/ MAP-II/03)"

All as described as per Item No. 45.00 hear-in above for " Table dining 4 person (Drg No FD/ MAP-II/03)"

All as described as per Item No. 45.00 hear-in above for " Table Peg (Drg No FD-384) "

All as described as per Item No. 45.00 hear-in above for " Teapoy (Drg No FD-382) "

All as described as per Item No. 45.00 hear-in above for "Table writing (Drg No : FD-275)"

All as described as per Item No. 45.00 hear-in above for " Mirror with Shelf (Drg No FD-52 )"

All as described as per Item No. 45.00 hear-in above for " Chair Easy (Drg No FD-229)"

All as described as per Item No. 45.00 hear-in above for " Chair Writing (Drg No FD-280)"

All as described as per Item No. 45.00 hear-in above for " Sofa Five Seater FD- 281 & FD / MAP-II/02"

All as described as per Item No. 45.00 hear-in above for " Sofa Four Seater FD- 281 & FD / MAP-II/02"

All as described as per Item No. 45.00 hear-in above for " Sofa Single Seater FD- 281 & FD / MAP-II/02"

M/S T.N.CONSTRUCTION

ARIN AND COMPANY

PREMIER HOOD HOUSE