Annual repair of residential building of PWD B and R Colony Rohtak for the year 2024-25.

Amount

Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (HSR 30.9)

Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 (HSR 10.8)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (HSR 10.63.2) Size of Tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)

12 mm cement plaster of mix : (HSR 11.8.2)

Cement pointing 1:2 on lining (HSR 14.23.1) In bed.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (HSR 30.28.1) One or more coats on old work

Distempering with 1st quality acrylic distemper (ready made) having voe content less than 50 gm per litre. of approved manufacturer and of required shade and colour complete. as per manufacture r's specification. (HSR 30.34.1) Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade: (HSR 30.37.1) Two coats Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (HSR 12.9.8)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (HSR 12.7.2.1) 35 mm thik Shutters

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : (HSR 12.32.1.1.2) Kiln seasoned and chemically treated Hollock wood

Renewing glass panes, with wooden fillets wherever necessary: (HSR 30.55.1) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sgm)

Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (HSR9.59.2) 110 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (HSR 22.22.1) White vitreous chinaware Orissa pattern W.C. pan of size each 1144 2767 3911 580x440 mm with integral type foot rests

Providing and fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: (HSR 22.32.1)

Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (HSR 22.25.2) One urinal basin with manually operated 5 litres PVC cistern and each manually operated stop cock/ angle valve

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (HSR 22.221.2) Size 550 mm x 400 mm x 815 mm

Providing and fixing kitchen sink including making all connections excluding cost of fittings. (HSR 22.13.1) White glazed fire clay sink of size 600x450x250 mm

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: (HSR 22.102.2) 150 mm diameter

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (HSR 22.104.1) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (HSR 22.107.1) 15 mm nominal bore

Providing and fixing Unplasticised PVC connection pipe with brass unions: (HSR 22.101.2.1) 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (HSR 22.124.1) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (HSR 22.182) 500 Ltr. Capacity.

1000 Ltr. Capacity.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (HSR 22.88) 15 mm internal diameter of pipeline. (HSR 22.88.1)

20mm internal diameter of pipeline. (HSR 22.88.2)

25mm internal diameter of pipeline. (HSR 22.88.3)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (HSR 22.94) 15 mm dia nominal bore (HSR 22.94.1)

20mm internal diameter of pipeline. (HSR 22.94.2)

25mm internal diameter of pipeline. (HSR 22.94.3)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (HSR 22.108.1) 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR 22.38)

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). (HSR 22.8.1) One way

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (HSR 22.14.2.1) 32 mm dia

Providing and fixing required Stainless Steel Fitting of press fit design of rade AISI 304 conforming to JWWA G116 standard with V-profile or M profileand with 0-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. (HSR 22.135.1)

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profileand with 0-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. (HSR 22.132.1) For 15.88 mm outer dia pipe

The Bansal Coop L&C Society Ltd.

The Netaji Co-op L& C Society Ltd, Rohtak

The Khatu Shyam Coop labour and construction society Ltd.