CONSTRUCTION OF ATTACHED TOILET AND A KITCHEN WITHIN VERANDAH IN BHARAT SCOUTS AND GUIDE OFFICE DISTRICT HEAD QUARTERS AT GOVT. MIDDLE SCHOOL JAKH ZONE VIJAYPUR DISTRICT SAMBA

Amount

Engagement of labour for making floor ready for tile work

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :In cement mortar

Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) Crushed . INCLUDING ALL LEAD,LIFT AND CARRIAGE

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed. INCLUDING ALL LEAD,LIFT AND CARRIAGE

Providing and laying of damp proof course of 40 mm thick with cement concrete (1:2:4),mix with 12.50 mm thick crushed stone aggregates. INCLUDING ALL LEAD,LIFT AND CARRIAGE

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) INCLUDING ALL LEAD,LIFT AND CARRIAGE

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. Including all lead, lift and carriage.

Reinforcement for RCC work including straightening cutting,bending,placing in position & binding all complete ( TMT bars).

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level. INCLUDING ALL LEAD,LIFT AND CARRIAGE

Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc.

Centring and Shuttering including strutting, propping etc and removal of form work for : Suspended floors, roofs, landings, balconies and access platform

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (Under 20 cms wide)

6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) INCLUDING ALL LEAD,LIFT AND CARRIAGE

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) INCLUDING ALL LEAD,LIFT AND CARRIAGE

15 mm Cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement:4 fine sand ) ,INCLUDING ALL LEAD,LIFT AND CARRIAGE

Providing and fixing sheet for door shutter including all fittings and complete job.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except burgundy,bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete .

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed. Including all lead, lift and carriage.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade 13.52.1 New work (two or more coats) over and in -eluding priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Providing and laying in position p.v.c drainage pipe including all fittings, complete job 4'' dia

Providing and laying in position p.v.c drainage pipe including all fittings, complete job 3''dia

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore Medium

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes r~spectively.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 litre capacity -White

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps Wash basin

Providing and fixing C.P. brass angle valve for flushing cister &wash basin including labour complete job.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking rangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent aving valid lSI license]. C.P. BRASS FITTINGS

Providing & fixing steel sink for kitchencomplete in all respect as per necessary as site.

Providing & fixing glass mirror complete in all respect as per necessary as site.

Providing & fixing soap case complete in all respect as per necessary as site.

Providing & fixing towel ring complete in all respect as per necessary as site.

Providing and fixing ball valve (brass) of approved quality complete. 15 mm niominal bore

Proving and laying in position flow trap &P-trap inculding all fittings , complete job.(LMR)

Providing & fixing electric points complete in all respect as per necessary as site.

Providing & fixing electric motor pump complete in all respect as per necessary as site.1 hp

Providing & fixing exaust fan complete in all respect as per necessary as site.

Providing and fixing15mm nominal boreCP Brass Bib Cock of approved quality complete job .LMR

Providing and fixing15mm nominal boreCP StopCock consealed of approved quality complete job .LMR

Providing and fixing G.l. inlet connection for flush pipe connecting with WC Pan complete job.LMR

Providing and fixing of PVC waste pipe for sink ,wash basin,etc complete job.LMR

Providing and fixing of PVC connection pipe with brass union with45cm length complete job,.LMR

Making connections of G.l. distribution branch with G.I.main of by providing and fixing of tee including cutting, threading,etc of the pipe complete job25mm to 40mm.

Providing and fixing of G.I. pipe complete with G.l. fittings, excluding trenching and refilling , complete job

Making chase upto 7.5x7.5mm in wall including making good in wall after housing the G.I.pipe complete job.

Providing and fixing aluminium work for doors, windows, ventilatior and partion with extruded built up standard tubular section,Z section and other sections of approved make and ISI 1285, fixed with dash fasteners of required dia and size including necessary filling up the gaps at the junction i.e.0top, bottom and sides with required EPDM rubber I neoprene gasket felt etc. Aluminium section shall be smooth,rust free, straight,mitred and jointed mechanical wherever required including cleat angle, aluminium snap beading for l panelling,C.P.brass stainless steel screws,all complete,For fixed portion . Powder coated aluminium.For fixed portion

For shutters of doors, windows & ventilators including providing and fixing hinges l pivot and making provision and fixing of fittings wherever required including the cost of EPDM rubber gasket required.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layers or graded wood particles board in panelling fixed in alluminium doors, windows shutter and partion frame with C.P. brass stainless steel screw etc complete as per direction of engineer-in-charge. (Pre-laminated particle board with decorative lamination on one side )

Providing and fixing glazing in alluminium doors, windows and ventilatior shutter and fixed partition with rubber and gasket,etc complete as per the direction of engineer in charge . with floating glass panes of 5.0mm thick

Filling the gap in between aluminium frame and adjacent RCC/brick/stone work by providing weather silicon sealent over backer rod of approved quality as per direction of the enginner in charge complete. Upto 5mm depth and 5mm width.

Providing and fixing alluminium handle bar 32mm outter dia,30mm thick and 400mm long with stainless steel screw,etc with complete as per the direction of the enginner in charge

Providing and fixing 1 OOmm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc complete

Providing and fixing aluminium casement windows fastner of required length for aluminium windows with necessary screw etc complete.powder coated

Providing and fixing aluminium round shape handle of outter dia 100mm with SS screw etc complete as per direction by engineer in charge . Powered coating.

Providing and fixing of pvc panel including carriage labour etc complete job (ceiling Panel)

Ravinder Pathania

JAGAN NATH CONTRACTOR