Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC HOUSE NO 99 3RD FLOOR SK JAIN BUILDING KALIBARI ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹46.8 L+₹28,530 (0.61%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹48.1 L+₹1.6 L (3.37%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹48.5 L+₹1.9 L (4.11%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹63.2 L+₹16.6 L (35.7%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
PROVN OF SECURITY LIGHTS WITH POLES AT WATER PT HIGH MAST LIGHT AT RAJBARI WATERPOINT 10 AC AT BLDG NO P484 3 CZW 05 SPLIT AC FOR EW CP BLDG NO T46 15 EW BN WATER SUPPLY POINT FOR CT SCAN FACILITY IN 165 MH STANDBY 25HP PUMP WITH MOTOR AND STARTER
2022_MES_551486_2
8490/C/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹92,000
4 Feb 2023
28 Oct 2022
18 Nov 2022
28 Oct 2022
16 Nov 2022
11 Nov 2022
28 Oct 2022 - 10 Nov 2022
Amount
S&F installation and testing and commissioning of Split type inverter Air conditioner of capacity 1.5 ton rating 5 star with cordless remote operated on 230 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric suply, testing on full load complete all as specified and directed. Make : Voltas/Blue star/Godrej/LG as approved by GE
Supply and fIxing Voltage stablizer for automatic operation single phase indoor type and designed for input variation between 90-300 volts with digital disply out put voltage stabliser at 230 Volts with energy of± 2.5 % and of capacity 4 KVA
M&L for sub main wiring with two runs of 4.00 Sq mm and one run of 4.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4.00 Sq mm + one run of 4.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 16 Sqmm 4 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
M&L for MCB Distribution board double door type TPN 4 way with 200 amps rated bus bar, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 63 Amp current carrying capacity in the DB complete with connection testing and commissioning.
Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit Breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Excavation in trenches n exc 1.5 mtr wide and n exc 1.5m in depth for foundation etc or for shafts, wells cess pits, manwholes, pier holes, laying of water supply pipe line/cabels etc n exc 10 Sqm on plan and getting out as in soft/loose soil complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and depth exc. 1.50 m but n.exc 3.00 m for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed..
Removing excavated material (soil) n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.
Sand cushioning to the full width of trenches for protection of cables including punning down complete all as specified. Note :- Thickness of sand cushioning shall be measure after punning down.
Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.
Cutting existing steel tubing for alterations or additions of size 40 or 50 mm Dia Bore
M&L for cutting cast iron pipes in position for insertion of tees, branches or replacing damaged length etc of size upto 150 mm bore. Note- (i) Fittings measured and paid seprately under relevent items
Cutting cast iron/DI pipe in position for insertion of new tees,branches, etc.incl welding work of size 200mm Dia Bore
Supply and laying in trenches steel water tubes medium grade galvanised with all fittings in wall / trench complete all as specified & directed of following sizes:- Note : GI fittings such as union, Tees , bends, nipples, sockets, elbows etc or welding work as required at site will be included in the rate quoted by the contractor.
20 mm dia
25 mm dia
40 mm dia
50 mm dia
Supply anf fixing of gun metal gate valve Gun-metal, globe valve ,with iron wheel ead, screwed both ends for iron pipe and fixed complete incl taking down old U/s gate valves as specified & directed of following sizes:-
20 mm dia
25 mm dia
50 mm dia
Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed of size 20 mm dia. Make : Leader/Gem/Jaquar
Material and labour for 6 Mtr length of road cutting/ digging with 1 mtr depth and 0.6 mtr width for laying of 20 to 50 mm dia DI pipe including required thickness of sand cushioning and re-filling of excavated soil and finished the top disturbed surface with 100mm thick PCC 1:3:6 type C2 (using 40 mm aggregate) or with shalipatch as per existing complete all as specified and as directed.
S&F, in replacement, rotational moulded polythene water storage tank triple /multilayer (Cylindrical vertical with closed top), incliding float valve and connected accesories and fixed in position all as specified in SSR Part-I of the capacities 1000 Ltrs capacity.
S&F rotational moulded polythene water storage tank triple /multilayer (Cylindrical vertical with closed top), incliding float valve and connected accesories and fixed in position all as specified in SSR pt-I of 500 Ltrs capacity.
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe suitable for the f sizes 25mm dia.
Supply, installing, commissioning and testing of Centrifugal Pump of capacity(25HP) 40 LPS, total head 30 mtr , 1450 RPM horizontal foot mounted end suction, vertical off Centre line Discharge ,single stage centrifugal split casing type with cast Iron closed impeller, stainless steel shaft (EN-8) for Raw water and incl Induction Motor 25 HP, 3 phase, 415Volts, 50HZ suitable for pumping set , having IP 55 protection,confirming to IS 325 with MS channel fabricated base frame ,CI flexible coupling with rubber disc with all connected accessories for installation complete all as specified & as directed by Engr-in-charge. (Make of Pump : BAREJA Model 500NC-2 (1340) Make of Prime mover (Motor) Kirlosker/Crompton Greaves).
M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 20-40, contactors size 50 complete with all connections for capacity 25 HP, cat part No IHPASDWE complete all as directed. (Make: L&T / Seimens / Havells
S & F PVC insulated multi stranded single core cable with copper conductor 1100 Volts grade conforming to IS: 694 / 1990 for 25 sqmm all as specified and directed. Make : Richa/Havells/RR Kabel.
M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 50-75, contactors size 50 complete with all connections for capacity 60 HP, cat part No IHPASDWE complete all as directed. (Make: L&T / Seimens / Havells
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron strip 25×4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking out unserviceable earthing plate and accessories all as specified and as directed. (Note: Earth lead upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.)
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised earthing lead of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking out unserviceable earthing plate and accessories all as specified and as directed. (Note: Earth lead upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.)
Supply and erect Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long), as per IS-2713 including painting with one coat of black bituminous paint through out internally and externally up to ground level and remaining external surfaces of poles shall be painted with two coats of aluminium paint over a coat of red oxide, zinc chrome primer including dismantling the old steel tubular pole, complete all as specified and as directed. (Note: Excavation & earthwork , PCC foundation & coping shall be measured & paid separately) Bansal Poles / Calcutta Poles / Jindal Poles / Kwality Steel-Kolkata / National tubing company/Neozne
M & L for PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in base foundation filling and mass concrete complete all as specified and directed.
M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for providing cement concrete Type B1 1:2:4 ( 20 mm graded aggregate) as in coping of poles including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.
Supply and laying GI tubing 40mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables or fixed to pole complete all as specified and as directed. Make : Jindal/TATA/Prakash Surya
S & F PVC street light junction box of size 300 x200 x105mm with front op-enable shutter and locking arrangement with one 6 Amps MCB and four way terminal fixed on porcelain insultor and fixed to pole with MS flat iron clamp 25 mm x 3mm size with nuts and bolts washers, etc complete all as specified and directed. Make: Sintex/Presto/Bajaj
Supply and fixing weather proof, flat twin core Cable with copper conductor of size 2.5 Sqmm PVC round sheathed (flexible) industrial cable complete all as specified and as directed. Make: Havells/ Polycab/ RR Kabel/ Finolex/ Gloster.
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as per specified and as directed. Make: Crompton/ Bajaj/Wipro.
Supply, erection, testing and commissioning of Galvanised Steel 12.5 Mtr High Mast system with its accessories i.e. Mast head frame, steel wire rope 6mm dia (7/19 Construction), railing cable, double drum winch, galvanised lantern carriage arrangement complete suitable for 9 luminaires symmetrically and lightning final. the mast shaft shall be in two section of bottom dia 340mmx4mm thick and top dia 150mmx3mm thick and base plate 540x540x25mm thick made of hot dip galvanised and suitable for wind velocity as per IS 875 and it shall have an integral power tool installed inside the base compartment for its operation through manual as well as motorised including construction of suitable shallow foundation with 1:2:4 concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 meter depth with all materials and labour. Provision of GI pipe earthing for High mast with 2.5 M long 40 mm bore GI pipe including connection to high mast earth terminal with 32x6 mm GI flats with all materials and labour. Erection of the panel on suitable foundation including all materials and labour and including the following accessories complete all as specified and directed by Engr-in-Charge:- (a) The foundation bolts shall not be less than M-30x850mm long manufactured from special steel along with nuts, washers, anchor plates and templates-1 set of eight. (b) Crompton 120 Watt LED flood light-06 Nos or equivalent approved make of CG/ Surya (c) LED aviation obstruction light-02 Nos (d) Control panel housing suitable size of incomer, digital timer contactor circuit for the automatic control of luminaries, MCB TPN 32 Amp, 440 Volt "C" series, breaking capacity 10 KA, outgoing terminals and control circuit. (e) Travelling cable multistrand copper conductor 2.5 Sqmm (f) Winch integral motor 1.5 HP single speed reversible type suitable for winch gear double drum SWL 750 Kgs. Make of High Mast : Bajaj/Surya/Crompton Supply & installation of Galvanized steel high mast lighting system of 12.5 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 04 nos 50 to 100w LED Lights.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 35 Sqmm 4 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe shall be measured and paid separately under respective item.
Supply, installing, commissioning and testing of Monoblock Pump set of capacity 50 LPS, total head 25 mtr, 1450 RPM horizontal foot mounted end suction, vertical off Centre line Discharge, single stage centrifugal split casing type with cast Iron closed impeller, stainless steel shaft (EN-8) for Raw water and incl Induction Motor 5 HP, 3 phase, 415Volts, 50HZ suitable for suction sweeper set, having IP 55 protection,confirming to IS 325 with MS channel fabricated portable base frame (trolley with wheel), CI flexible coupling with rubber disc with all connected accessories for installation complete all as specified & as directed by Engr-in-charge. (Make of Pump : BAREJA Model 500NC-2 (1340) Make of Prime mover (Motor) Kirlosker/Crompton Greaves).
M&L for DOL starter 3 phase 440 volts 50 HZ with over load relay range 50-75, contactors size 50 complete with all connections for capacity upto 7.5 HP, cat part No IHPASDWE complete all as directed. (Make: L&T / Seimens / Havells)
S&F PVC suction hose 50mm dia bore. Make : Kissan
Supply and fixing Suction sweeper suitable for 5 HP motor with accessories as per sample with complete set
Supply and fixing PVC insulated multi stranded Three core cable with copper conductor 1100 Volts grade conforming to IS: 694 / 1990 for the sizes 10 sqmm.
Supply and fixing of Nylon rope dia 20 mm size.
Supply and fixing Fine mesh net long 20m x 2m size for removing solid particals/dust from swimming pool.
Supply and fixing strong fine mesh netting material allows capture of leaves at the bottom, sturdy hard plastic frame with lightweight design of size 50 x 45 x 5 cm (360grams).
supply and fixing of 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings of dia 50mm.
M/S VIKASH TRADERS
M/S DEEKSHA ENTERPRISES
Rameshwar Prasad
m/s chakraborty enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .