Construction of Godown 2000 MT and Machinery Shed 114 SqMtr For B R Dhage Patil Agro Producer Company Ltd AP Chaturi Tq Palam Dist Parbhani

Amount

Warehouse

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, wateri+B5:B12ng including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR OF 2022-23 ITEM NO. 21.01 & PAGE NO.153

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. SSR OF2022-23 ITEM NO. 21.08 & PAGE NO.154

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Bd.A.3 Page No. 259 SSR OF 2022-23 ITEM NO. 21.12 & PAGE NO.154

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely) Bd. F. 3. Page No. 298 and B. 7, Page No. 38 SSR of 202-23 ITEM NO. 25.11 & PAGE No. 178

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal or R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc, complete, (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal or R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finish for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely) SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO. 181

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely) SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO. 184

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Natural Sand / crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate ( Natural Sand / crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Natural Sand / crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO.184

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings 01 as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface it special finish is to be provided and curing etc. complete. (Excluding enforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Natural Sand / crushed sand VSI Grade finely washed etc) SSR OF 2022-23 ITEM NO. 26.25 & PAGE NO. 185

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.185

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197

Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc. complete. SSR OF 2022-23 ITEM NO. 21.36 & PAGE NO.157

Filling in plinth and floors with contractors’ material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.SSR OF 2022-23 ITEM NO. 21.37 & PAGE NO.157

Providing soling using 80 mm size trap metal in 15 cm layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO. 157

Providing second class Burnt Brick masonry with conventional/ IS. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc complete SSR OF 2022-23 ITEM NO. 32.06 & PAGE NO.209

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209

Providing and fixing in position factory made box type steel window with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including providing horizontal mild steel 12mm square bars at 10cm center to center, required F-7B section, section 7-6, section 20mm x 5mm mild steel flat for shutter and F4B section for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and fastening etc. complete finishing with one coat of anti- As directed by Engineer in charge SSR OF 2022-23 ITEM NO. 39.22 & PAGE NO.248

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248- 1979) (Without mechanical gear) SSR OF 2022-23 ITEM NO. 39.24 & PAGE NO.248 Bd.T.55, Page No. 510

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete.SSR OF 2022-23 ITEM NO. 36.03 & PAGE NO.227

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.SSR OF 2022-23 ITEM NO. 36.12 & PAGE NO.227

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.SSR OF 2022-23 ITEM NO. 36.14 & PAGE NO.227

Providing preconstruction alantitermite treatment as perI.S.6313 (Part II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on BASIC RATE AS PER SSR OF 2022-23 ITEM NO. 21.22 & PAGE NO.155

Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long (Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and 10mm thick at bottomembeded in cement concrete SSR OF 2022-23 ITEM NO. 44.18 & PAGE NO.295

Providing and laying in situ cement concrete M30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumen etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO. 33.31 & PAGE NO. 216

Royalty

FOR SAND

FOR OTHER METAL

Testing

BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value

BASIC TEST OF CEMENT Standard Consistency Fineness, Specific Gravity, Setting Time (Initial &. Final), Compressive Strength, Soundness

BRICKS Water Absorption, Compressive Strength, Efflorescence (Set of 5 bricks)

CONCRETE Compressive strength of C.C.Cube (Set of 3 cubes)

MURUM-HARD Sieve Analysis

STEEL BAR TESTING Upto 16 mm (Set of 3 Bars)

Supplying, fabricating, erecting and fixing in position of steel structures at all levations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 -2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases, supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG - HHI 664002) of 35- 50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work).

Supply & Fixing of PPGI sheets of 0.5 mm thick as shown drawing or as directed by engineer in charge with all necessary accessories

Supply & fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long

Providing and fixing lovers(1.5xl.5) in sheeting as per specifications and as directed.

Internal Road

Excavation for roadway in earth, soil of all sorts, sand -gravel or soft murum including dressing section to required grade, camber, and side slopes and conveying the excavated material with all lifts upto lead of 50 m and spreading for embankment or stacking as directed

providing soling using 80 mm size trap metal in 15 cm, layer including filling voids with

Supplying 80 mm trap stone metal at the road side including conveying & stacking etc.

Spreading 40 mm trape stone metal including sectioning as directed etc. complete

Spreading 80 mm trape stone metal including sectioning as directed etc. complete.

Spreading 40 mm trape stone metal including sectioning as directed etc. complete.

Supplying hard murum/ kankar at the road site, including conveying & stacking etc complete.

Spreading hard rnurum/soft murrum/ gravel or kankar for side width complete.

Compacting oversize metal Jayer with H. M. with power roller including artifical watering and necessary.labour etc complete

compacting the hard murum side width including laying in layers on each side with vibratory roller including artificial watering etc.complete

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm, stone me layers 100% crusher broken metal with conical crusher plant

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 132 to 5.6 mm aggregates premixed with bituminous binder 1.56 Kg/Sqm transported to with VTS, laid over a previously prepared surface, finished to the required grade, alignment, and rolling

9 MM SEAL COAT: Providing and laying of Type A 9 mm premix seal coat with HMP of apropr capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade 1.2 kg/Sq.m, preparing existing road surface by mechanical means, spreading chips rolling,

Electrification

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq.mm. copper conductor continuous 5.4S sq. mm. (12 SWG) G.l. earth wire complete erected with glands & lugs, on wall/trusses /nole.or laid n provided trench/nine as per specification no CB-T/CU

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16. sa. Mm complete as per specification no. CW-EXNCTR

Making trench of suitable width and depth in soft soil for laying provided LT cable un to andincluding 16. sa. mm complete as per specification no. CW-EXNCTR

Supplying & erecting mains PVC unarmoured cable 1100 Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. 1. Saddle @ 0.25 m C/C & rigidly grouted in the wall with the help of plated screws

Supplying & erecting weatherpro of powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top Lover necessary connection etc complete with approved make

Providing point wiring for street light with PVC unarmoured cable 1100 Volt grade ISI mark core 1.5 sqmm stranded/solid copper erected on wall with G. 1. Saddle duly painted @ 0,25 in C/C rigidly grouted in the wall with the hein of plated screw including

Supplying & errecting 10-12W, 230V integral type LED Lamp suitable for

Supplying and errecting LED street light fitting suitable for 20 to 25W with PF>0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded Number aluminium complete as per specification No FG-ODF/FLS

Supplying and erecting street light Wall bracket made from 40 mm, dia 'B' class G.l. pipe 12 m in total length complete as per specification no. FG-BKT/WB

Providing earthing with galvanized iron earth plate size 60 x 60 x 0,6 cm complete with a materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm, dia. GI. pipe or 20 mm dia. G.I. Rod complete with all materials as per specification no. EA-EP Providing pipe type earthing with 40mm, dia. G.. Nur pipe or 20 mm dia. G.I. Rod complete with all materials as per specification

Supplying, erecting & marking DPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided istribution board as per specification no. SW-SWR/MCB

Supplying and erecting Gl sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc.

Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush

Supplying & erecting G.l. pipe 'A' class 25 mm dia, erected for enclosing XLPE armoured cable on wail/pole as per specification no. CB-CE

Supplying & erecting G.l. pipe 'A' class 40 mm dia, erected for enclosing XLPE armoured Icable on wall/pole as per specification no. CB-CF

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting 18 quage M.S. Box powder coated (4"x4") 3 way for mains

Point wiring for light bell with 2-1.5 sq mm PVC insulated wire

Supplying shockproof type hand lamp with lamp holder, bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top.

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+18) FRLSH grade copper wire, flush type switch, garthing and required accessories as per

Supplying & erecting 40 mm dia G.l.pipe 2.5 m lenghth for earthplate

Supplying & erecting 4 pole insulator only switch version of MCB of 40 Amp

Supplying & erecting main with 2 x 4.00 Sq mm stranded copper PVC insulated wire with 2 x 1.5 sq.mm copper PVC wire in PVC casing caping on wall/ceiling Supplying and erecting

Supplying & erecting ready to use Retrofit T8 LED 18/20 tube light with polycarbonate body, heat sink, Integrated HF electronic driver complete and campatble to T8/T12 LED

Supplying a-d erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and fixing wiremesh (Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jail cover shall be made from good quality G.l. wire

Supplying and erecting ding dong / electronic musical type call bell with heavy duty com suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmice

Supplying and erecting street light Wall bracket made from 25 mm. dia 'B' class G.l. pipe 12 min total length complete as per specification no. FG-BKT/WB

Supplying and erecting CFL lamps 11 W

Supplying & erecting STEEL TUBULAR SWAGED POLE 139.7X114.3X88.9mm dia.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal or R.C.C. columns as per detailed designs and S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal or R.C.C. beams S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing soling using 80 mm size trap metal in 15 cm, layer including filling voids with crused sand/ grit, ramming, watering etc. complete. Spec. As directed by Engineer in-charge S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Filling in plinth and floors with constractors Material/ brought from outside and approved by Engineer in-charge inlayers of 15 cm to 20cm including watering and complaction etc. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing masonry with conventional/Indian Standard type brick in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing masonry with conventional/Indian Standard type brick in cement mortar 1:6 in superstructre including striking joints, racking out S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing Cement plaster 6 mm thick in single coat in cement mortar 1:4 without neeru finish to consrete or brick, scaffolding complete as per specification and as directed by Engineer-in-charge S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing Cement plaster 20 mm thick in single coat in cement mortar 1:5 without neeru finish to consrete or brick S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Waterproof sand daced cement plaster externally in C.M. 1:4 using approved screened sand in all positions including base coat of 15 mm thick in C.M. 1:4, using Waterproof Compound at 1 kg per cement bag, curing the same for not less than two days and keeping the surface of the base coat and keeping the surface of the base coat rough to receive sand face treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for 14 days scalfoding etc complete.S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing white lime wash in two coats to internal wall of warehouse, scffolding etc. Complete as per specifications S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing Colour wash in two coats to internal wall of warehouse, scffolding etc. Complete as per specifications S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Proving Mild Steel Rolling Shutters as per drawing, scaffilding etc complete as per specifications S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to 15:2062-2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases, supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG- HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer-35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required 21 for the complete work). S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.

Providing and laying in situ cement concrete M 20 with tremix treatment for 100 mm thick for flooring with groove cutting of 4MM wide and 20 MM deep with necessary refilling with bitumen etc complete. S.S.R. OF 22- 2023 (item NO. 33.3 & PAGE NO.216)

Trimix vacuum dewatering and trovelling treatment to concrete laid above item S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Providing and fixing lovers (1.5x1.5) in sheeting as per specifications and as directed. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF-600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long. S.S.R. OF 2023 (NO. 21.06 & PAGE NO.153)

Shed Electrification

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per

Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected

Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid copper

Supplying and erecting integrated LED street light fitting 40 to 50 W IP65 & IK08 class having single piece pressure die-cast

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured

Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing

Supplying & erecting 18 guage M.S. Box powder coated (4"x4") 3 way for mains

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC insulated wire

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel

Supplying erecting and marking four pole isolators only switch version of miniature

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with

Shed Testing

Cement Fineness, Consistancy, Setting Time, Compressive Strength, Specifuc Gravity.

Cement Concrete M-20 Compressive Cube Strength

Mild Steel Utimate Tensile Test, Wt

Srructural steel

Shed Royalty

Murum

Metal

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

ANSARI CONSTRUCTION COMPANY

R G DESHMUKH