Civil Work

Dismantling, Flammed Granite Slab and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as directed by the departmental officers.

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed excepting rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling M. sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling quarry stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Providing two legged scaffolding using 15mm dia casurina probs post of 4m over all length (3m height + 0.50) projection + 0.50m into the ground the distance between the two rows being 1.25m and the spacing of post being 2.00m in both the row with two horizontal post with 0.50m over lap on either side sand braces at 2.00m centre to centre including longitudinal and transverse middle braces to setup and providing a platform with countrywood planks of 40mm thick and 1m width etc complete complying with standard specification and as directed by the departmental officers at site of work.

Initial height of 2.50M

Additional height of 1.00M

Supplying and fixing of wall paneling to the existing wall portion using 19mm thick anti termites water proofing plywood of approved quality and colour with grooves and finishing with interior grade of 12mm thick fluted panel etc., complete complete complying with standard specifications.

Supplying and fixing of wall paneling to the existing wall portion using 19mm thick anti termites water proofing plywood of approved quality and colour with grooves and finishing with interior grade of 12mm thick PVC panels etc., complete complete complying with standard specifications.

Supplying and fixing of Soffit panel false ceiling using 2"x1" Aluminium Channel 2'-0" intervals fixing to the existing ceiling portion using 38mm x 6mm screws etc., The rate inclusive of cost of Material, frame work, labour charges for cutting and fixing and finishing neatly etc, complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and fixing of Gyp board false ceiling using 12mm thick Gypboard of approved quality design pattern and drops given by the deptl officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the "GYPBOARD" on the panel provided as per design/pattern given by the deptl officers. And finishing the ceiling surface with same plaster of paris materials etc. complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and fixing of full length mirror with 6 mm thick saint gobian pasted on plywood with help of 1" mirror tape including labour and transportation charges etc complete complying with standard specification

Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specification.

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of wall paneling to the existing wall portion using 19mm thick anti termites water proofing plywood of approved quality and colour with grooves and finishing with unicore exposed laminate sheet of 3mm etc., complete complete complying with standard specifications.

Supplying and fixing of wall paneling to the existing wall portion using aluminium channel 2"x1" at 2' intervals and fixing 19mm thick anti termites water proofing plywood of approved quality and colour with grooves and finishing with charcoal panels of 4mm thick etc., complete complete complying with standard specifications.

Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handleetc., completecomplying with standard specification and as directed by the departmental officers - Double leaf.

Paving the floor with best approved quality fine polished Granite Stone (super fine polished with machine cut edges ) Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface with putty etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of titanium coloured 3D embossed gold letters of size 150mm with necessary bolt and nuts. The rate including cost of materials, labour for fixing and transportation charges etc complete complying with the standard specifications and directed by the departmental charges

UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Cladding with granite tiles of best approved quality fine polished Granite Stone (super fine polished with machine cut edges )Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Supplying and laying of interlocking paver block stone 63mm thick over a base layer incl. cost of materials laying and labour charges etc complete complying with the standard specifications and as directed by the departmental officers

Supplying and fixing of wood polymer composite (WPC) door with solid door frames extruded with size 75mmx50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55 and buld density 750kg/cub.Mt. The frame shall be fixed to the wall using 10x10mm long MS screw throught the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door Shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550kg/cub.Mt moulding the thickness remains 25mm (+/-1mm) etc. complete as per the direction of the departmental officers.(make Qute / Equivalent)

Supply and fixing photo panels of 0.46x0.30m digital vinyl print mounted on a 3mm foam board with matt lamination four sides covered 1" thick imported beading (mounted teak) including recopy, scanning and designing The rate including cost of materials, labour for fixing and transportation charges etc complete complying with the standard specifications and directed by the departmental charges

GST at 18%

Please Enable Macros to View BoQ information