Disconnecting, carrying and reinstallation of 30 KVA voltage corrector device and repairing of panel with others allied work at P.H. no. I and P.H. no. II of Gokhna W/S Scheme under EMSD-I, P.H.E. Dte Dist.-24Pgs(N).

Amount

PART A Disconnection of all electrical connection of the 30 KVA (Make - ECS) damaged voltage stabilizer from Barberia w/s scheme towards reinstallation the same at Gokhna pwss(p/h - II) as direction of EIC.

Withdrawing the above Voltage Stabilizer from its base and mending the floor at Barberia by following proper electrical precaution as per direction of EIC.

Carrying the Voltage Stabilizer by engaging suitable vehicle and manual labour including loading and unloading at both the ends as per direction of EIC.

Inspection & checking the defective voltage stablizers and other electrical installation at site by engaging skilled electrician as per direction of EIC.

Dismantiling the voltage stabilizers part by part for detecting the fault as per direction.

Supply, delivery and storage of the following spares for the following voltage corrector device :

TP, MCB (50 Amp), make- ABB/ other approved make

Variac carbon , 35 amp

Digital Ammeter, make - Rishabh/other approved make

Control card, make - approved make

Transformer oil (Insulating oil) as per IS :335-2018 (Savita/Transol)

Reassembling the voltage stabilizer part by part with supplied Materials as in sl no 6.1 to 6.5 including supply necessary wire, hardware and wiring materials and recharging deficit transformer oil as per direction.

PART B Disconnection of all electrical connection of the (12.5 - 20)HP starter panel (Make - ECS) from Chandipur(p/h - II) w/s scheme towards reinstallation the same at Gokhna pwss(p/h - II) as direction of EIC.

Withdrawing the above starter panel from its base and mending the floor at Barberia by following proper electrical precaution as per direction of EIC.

Carrying the Voltage Stabilizer by engaging suitable vehicle and manual labour including loading and unloading at both the ends as per direction of EIC.

Supply, delivery of the following spares for the following starter panel :

Motor Protection relay, MPR300 (Protection type : Overload, Phase failure, phase unbalance, locked rotor, current unbalance, earth fault protection) for the starter panel as per direction of EIC. Make - L&T/other approved make

Supply ,delivery at site of voltage monitoring relay (Phase failure, Unbalance voltage, Phase sequence, Over voltage & Under Voltage protection with digital display). (Make-Siemens/any other approved make)

Supply ,delivery at site of 32A power Contactor, AC-3 duty, 230V AC. (Make- ABB /any other approved make)

Supply and delivery of 25 sq mm, 3.5 Core 1.1 KV AI, Ar cable conforming to IS-7098 (part-1) 1988 with upto date amendment. (Make- Approved make)

Drawing and connection of cable as in item no 12.0 on wall and connection complete with all equipment as per direction.

Making joints of the above cable by supplying compression type gland thimble, socket etc as per direction of EIC.

Connecting the above supplied changeover switch, bus-bar and Main Switch body to earth busbar including S & F by 25 mm x 6mm Galv. [Hot Dip] steel strip on wall/floor with Gl saddles as required and connection to equipments incl drilling holes. with bolts, nuts, washers etc.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staples buried inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm G.I bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction.

Installation and commissioning of the existing Chlorinator in new position with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone, chips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be fed from PLC panel of pumping machinery]

Supply and delivery of 100A, TPN, 415V main switch in sheet steel enclose with neutral link rewireable porcelain fuse unit (Make-Havells/other approved vendor list.)

Supply and fitting fixing of 20 watt LED tube light set. (Make-CG/Philips/Similar type of approved make)

Supply and fitting fixing of 12 watt LED Bulb. (Make-CG/Philips/Similar type of approved make)

Repairing of internal electrification of P/House by 2 X 1.5 sq.mm. PVC cu. wire through suitable size casing with earthing attachment with supplying of switch as per approved make and brand.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply ,delivery at site of Digital Clock Timer as per direction of EIC. (for Gokhna pwss, P/H - I) (Make- GIC /any other approved make)

Supply ,delivery at site of 32A power Contactor, AC-3 duty, 230V AC. (for Gokhna pwss, P/H - I) (Make- ABB /any other approved make)

Installation of the above materials, repaired Voltage Stabilizer on constructed foundation & repaired panel on suitable position after dismantaling the old existing damaged materials and by supplying all required materials and testing, commissioning the same as per direction of EIC.

Add: GST @ 18%

Add: LWC @ 1%

SMILE (BID ID -6835438)

ANJAN ENTERPRISE (BID ID -6835426)