WELCOME MAINT, PERIODICAL SERVICES, ATT AND CERTAIN B/R MISC WKS AT PB ENCLAVE AND ADJOINING AREA UNDER GE (NORTH) UDHAMPUR

Preparation of old decorated plastered surfaces and applying one coat of white wash on walls, complete all as specified and directed.

Preparation of old decorated plastered surfaces and applying one coat of white wash on ceiling, complete all as specified and directed.

Complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss & efflorecense salts and trading oil & greasy spots and applying two coats of distemper oil emulsion white or tinted over one coat of 1 to 2mm thick wall care putty over a coat of alkali resistant primer, complete all as specified and directed.

Preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and filling nails marks with wall putty incluidng finishing as smooth surface and applying one coat of OBD white or tinted, complete all as specified and directed.

Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete, all as specified and directed.

Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.

Complete removing existing treatment upto 4 storey bldg including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed.

Preparation of old painted steel and iron surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

M&L for Anti Termite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) and white/coloured cement to match the existing floors complete all as specified and directed. NOTE: 1. The chemical required for Anti termite treatment shall be purchased from manufacturers/authorized dealers only and contractor shall produce the purchase voucher etc. to prove the genuineness of the same. 2. Anti termite treatment shall be got done through an approved specialized agency which is a member of Indian Pest Control Association holding valid license as per Clause 13 of Insecticides Act 1968. Persons employed to do the Antitermite treatment shall be qualified as per Rule 10 of the rules framed under the Insecticides Rule 1971. Agency shall be approved by GE based on request of contractor and contractor shall submit all necessary documents regarding eligibility of agency. 3. Anti termite treatment shall be carried out with emulsion as mentioned in Particular specifications of makes attached in tender and shall be purchased directly from manufacturer or his authorized dealer. Original purchase vouchers shall be produced to the GE for verification which shall be madatory requirement.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of derbish outside MD land all as specified and as directed.

M&L Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as in sunken floor/ foundatiom, complete all as specified and as directed (Work to be executed in buildings upto G+3 story)

25 mm thick, Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed.

M&L for Treatment of sunken floor surfaces with 0.488 kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg /Sqm mixed with acrylic based polymer based modified cementitious composite compound @ 0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours, including taking down old/existing treatment with wire brusing and clearing the dust and foreign material before new treatment and incuding one GI light grade 450mm long 32 mm dia Spout to each sunken floor, complete all as specified and as directed.

M&L for preparation of surfaces by scrapping and properly cleaning the roof top surface. Applying first coat fibre reinforced elastometric liquid water proofing membrane formulated with PU hybrid polymers and reiforcing acrylic fibre with Sun reflective index (SRI) of 100-110 having minimum elongation of 350%, tensile strength of 2.9 MPa and shall have cracks bridging abylity upto 2.5mm and shall resist 10 Bars of hydroelastic pressure reduce surface temperature upto 10 degree celsius with 33% dilution of priming coat. Laying of fibre mesh of 0.3mm thickness weave in leno pattern having 45 Gsm/Sqm and pasting it properly with overlap of 50mm and allow it to dry applying third and final coat undiluted @ 0.45 ltr/Sqm complete all as specified and as directed.

Demolition Stone slabs and tiles laid dry or dry beded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed.

18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM 1:6 complete all as specufied and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces, in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and directed.

Rendering 10mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement, complete all as specified and as directed.

Dismantling floor, heart or wall tiling including Cement Mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Glazed ceramic coloured tiles 450mm x300mm or 600mmx300mm x 6 to 10 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Double Charged coloured Vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tile from 0.36 sqm to .72 Sqm in floor etc, set and jointed in cement slurry and pointed in shite or coloured cement over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

50mm thick, PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in floor finished even & smooth with out using extra cement complete all as specified and directed.

25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor base of tiles complete all as specified and directed.

Sheet glass tinted/ frosted/ transparent 4.5mm thick ordinary quality and glazing with any type of beading/oil putty in square complete all as specified and directed.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, cleats, etc to make door or window fully functional complete all as specified and as directed. Note : Any other mongeries used in work will be measured and paid separately

S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc, complete all as specified and directed.

S&F sunmica glazed sheets 1-2 mm thick over ply woods as in cupboards, wardrobes etc with and including adhesive as per manufacturers instructions, complete all as specified and as directed.

S&F in repairs Drawer side channel of standard size and including of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and as directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen complete all as specified and as directed.

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and as directed.

Taking down chowkats or frames with shutters(without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutter of any description exc 1 Sq.m and n.exc 2 Sq.m each complete all as specified and as directed.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

35mm thick factory made flush shutters, solid core constructions, with block board, core and plywood face panel, commercial plywood on both sides, complete all as specified and directed.

35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.24 (a), complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed, complete all as specified and as directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel towel bolts of extruded section and fixed, complete all as specified and as directed.

All as per description of Ser item No. 47.00 here in before but 125 mm Size, complete all as specified and as directed.

S&F aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and as directed.

S&F in repairs aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding, complete all as specified and as directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 50 mm long fixed to pressed steel/angle iron frames by welding, complete all as specified and as directed.

S&F in repairs continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open, complete all as specified and as directed.

S&F in repairs 40 mm dia cup board knobs, brass polished, fixed with nut, screws and washer of mild steel, complete all as specified and as directed.

S&F in repairs mild steel powder coated or chromium plated peg sets of six pegs of standard quality as approved by Engr-in- charge and fixed etc, complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as directed.

S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc, complete all as specified and as directed.

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or welded to steel frames with welding/fitted with screws etc, complete all as specified and as directed.

S& F in repairs fancy type SS curtain rods 25 mm dia with end fittings and fixing brackets of required size ( two nos end brackets and two Nos wall brackets fixed with wooden gutties and screws, complete all as specified and as directed.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and as directed.

S&F Aluminum door seal in repairs with PVC bush of adjustable type (Overall width 25mm) of approved quality, fixed to door shutter, complete all as specified and as directed.

Vitreous china wash down water closet (pedestal pattern), suitable for P or S trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

Plastic water closet seat, closet pattern with flat button and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , complete all as specified and as directed.

Vitreous china squatting pan, orissa pattern fixed in repairs of size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as specified and as directed.

S&F one piece EWC of any shape and size with slim soft PVC seat covers S or P trap white complete with all fittings complete all as specified and as directed.

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc., fixed in repairs,complete all as specified and directed.

Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified.

S & F for waste pipe of dia 32mm for WHB/Sink, complete all as specified and as directed.

S&F in repairs 32mm bore dia of CP brass waste coupling suitable for WHB, complete all as specified and as directed.

S&F in repairs 40 mm bore dia of CP brass waste coupling suitable for Kitchen sink complete all as specified and as directed.

Supply and fixing PVC lid with locking arrangements suitable for PVC water tank of any capacity Ltr, complete all as specified and as directed.

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm bore (minimum weight 142 gms )complete all as specified and as directed.

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as specified and as directed.

S & F in repairs for spindle suitable for 15mm bore CP taps/ mixers, complete all as specifed and as directed.

20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges fixed in repairs complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Corner Glass self ( With CP brakets), as in repairs complete all as specified and as directed.

Single lever wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

Hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.

Shower rose, brass, chromium plated, 150 x 150mm Square with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed in repairs complete all as specified and as directed.

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed.

CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

Sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratary with lugs, washers and wastes: including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting upon to pipe overall size 915mm x 460mm bowl size 410mm 330mm x 160mm, fiexed in repair complete all as specified and as directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with' long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

Dismantling water tanks of 1000 ltrs capacity and removing to store, complete all as specified and as directed.

Dismantling water tanks of 500 ltrs capacity and removing to store, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Triple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Triple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)

Cleaning of 1000ltr capacity water tank including removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as specified and as directed.

Cleaning of 500ltr capacity water tank including removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as specified and as firected.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.

15 mm bore dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

20 mm bore dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 incl all necessary fittings in wall/ trenches complete all as specified

S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 incl all necessary fittings in wall/ trenches complete all as specified

Dismantling of wrought iron or mild steel dia work of any description complete all as per specified and directed by Engr-in-Charge.

Mild steel work in S&F Roof trusses (framed), trussed, purlines, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Dismantling asbestos cement (Corrugated or semi corrugated etc) sheet in roof covering including ridges, complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F in repair Pre-painted glavalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel/ wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of primer, complete all as specified and as dircted.

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

S & F powder coated GI frame grid of size 600 x 600 for false ceiling including non asbestos fibre cement building boards of 4mm thick and size 595x595mm , fixed or laid/ inserted to timber/GI/Aluminium frame work with screws and including butterfly clip complete all as specified and as directed.

S & F hollow PVC Wall paneling consisting of 5-6mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site complete all as specified and as directed.