Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC NIWAS BELOW UTTAM GAS AJANCY DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹11.6 L Quoted ₹11.7 L | L1 | Accepted-AOC AOC |
| 2 | L2₹11.9 L+₹11,509.76 (0.98%)Rejected-Finance R O SHAHI NIWAS UPMOHAL KYARI P O AMBEDKAR CHOWK TUTIKANDI SHIMLA 4 | ₹11.9 L+₹11,509.76 (0.98%) | L2 | Rejected-Finance 2nd Lowest |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
22 Aug 2026, 10:00 amClosed
Executive Engineer Division Kasumpti HPPWD Shimla-
Executive Engineer Division Kasumpti HPPWD Shimla-3
Construction of Cupboards, P/F panelling , P/F AI Windows , PVC Flooring in various rooms in Directorate of Health Services Block No.- 5 , SDA Complex under Parimahal Section
2026_PWD_141111_1
SD-I-CTR-Tender-26- 14644 dt 12-08-2026
Open Tender
Civil Works
Percentage
30 days
kasupti
As per SBD
12 documents required · 12 mandatory
₹500
₹25,000
12 Sept 2026
14 Aug 2026
22 Aug 2026
14 Aug 2026
22 Aug 2026
14 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. (Excluding GST) | - | Per Kilogram | 97.46 | - |
| 2 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. MAKE TATA Dura Shine (Excluding GST) | - | Per Square Metre | 1,228.81 | - |
| 3 | Providing and fixing G.I pipes complete with G.I Fitting including trenching and refilling etc , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) External work (a) 15mm dia nominal bore . (Excluding GST) | - | Per running Meter | 237.29 | - |
| 4 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screw etc complete (New work) , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm dia nominal bore . (Excluding GST) | - | Each | 127.12 | - |
| 5 | Providing and fixing 19mm thick HDMR laminated water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | - | Per Square Metre | 2,161.02 | - |
| 6 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | - | Per Square Metre | 847.46 | - |
| 7 | Providing and fixing HDMR ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick. (Excluding GST) | 1 | Per Square Metre | 1,144.07 | ₹1,142.93 |
| 8 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)1st class deodar wood . (Excluding GST) | 1 | Per Running Meter | 67.8 | ₹67.73 |
| 9 | Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | - | Each | 59.32 | - |
| 10 | Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (Excluding GST) | - | Each | 169.49 | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
SBD1150974.pdf
Tender Documents • 7.09 MB
BOQ_209453.xls
BOQ • 0.34 MB
ConditionVIII.pdf
Additional Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .