REPAIR/REPLACEMENT OF INTERNAL WIRING AND RENEWAL OF LED TUBE LIGHT FITTING WITH SUBMAIN AND DBS AND CERTAIN WATER SUPPLY AND ALLIED WK AT SEC 28/29 UNDER GE CHANDIGARH

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures and making good disturbed surfaces of wall , floor etc making good the distrubed surfaces to match wth existing surfaces of wall, complete, all as specified & directed.

Taking down carefully old unsv MCB DBs including MCBs complete all as specified & directed.

Taking down existing unserviceable tube light fitting & box type fitting of any size and capacity complete all as specified & directed. .

Taking down carefully old unsv copper/aluminium sub main wiring any size and making good disturbed surfaces of wall , floor etc and matching wth existing surfaces of wall, complete, all as specified & directed.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable in and including concealed , non metalic rigid PVC conduit medium grade ISI marked, conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS Box, 1.6mm thick with modular cover plate with frame , sockets, fan regulator etc for One light/fan point controlled by one way switch complete all as specified. : Note:-1. cable Colour should beas per IS code. 2. Modular switch sockets fan regulators shall be meaured and paid separately udner respective items. 3. Cost of mudular MS box , modular cover plate and frame of any modules as required at site and as directed by Engineer-in-charge is deemed to be included in th quoted rates.

All as per item No 5 above but One ceiling fan/exhaust fan point controlled by one, one way 5 Amps switch

All as per item No 5 above but One 3 pin socket outlet 5 Amps on independent board

All as per item No 5 above but One 3 pin socket outlet 5 Amps on same board

All as per item No 5 above but One light point controled by two, two way 5 Amps switches.

All as per item No 5 above but One bell/ buzzer point controled by one bell push on same board with other switches or on independent board.

All as per item No 5 above but wiring with 2.5 sqmm copper conductor for power point.

M&L for Sub main wiring/power wiring complete with two runs of 4.0 Sqmm, single core, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc., with one run of PVC insulated, 4.0Sqmm FRLS copper conductor for earth continuity all as specified and as directed. MAKE : Polycab / Finolex / havells NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length & cable Colour should be as per IS code.

All as per item No 12 here in above but with 2x6 Sqmm for phase and neutral and 1x6 Sqmm for earth wire complete. Make : Polycab / Finolex / havells/Palaza.

M&L for 3x1.5 Sqmm PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor drawn in the existing metal/ PVC conduit & Casing capping including connecting of the ends into the switch / socket/ DB complete including taking down old unservicable cable from the existing conduit all as specified and as directed. Note : Three runs of cable measured as one unit.

All as per Item No 14 here in above but of 3x2.5 Sqmm.

All as per Item No 14 here in above but of 3x4 Sqmm.

All as per Item No 14 here in above but of 3x6 Sqmm. Note: for item No 12 to 17: Make of PVC cables : Finolex/Polycab/GRANDLAY, Make of PVC Conduit : Plaza/Finolex/Kalinga

Supply and fixing switch piano flush type single pole one way 5 amps 230 volts complete all as specified and as directed. Make:- Anchor/SSK/Legrand/Indoasian

Supply and fixing socket piano flush type universal 2 in 1,3 pin 5 Amps, 230 volts complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply and fixing switch piano flush type single pole one way 15 amps 230 volts complete all as specified and as directed. Make:- Anchor/SSK/Legrand/Indoasian

Supply and fixing socket flush type universal 2 in 1, 3 pin 5 &15 Amps, 230 volts complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply and fixing two way switch universal 5 amps 230 volts complete all as specified and as directed. Make:- Anchor/SSK/Legrand/Indoasian

Supply and fixing bell push universal 5 Amp, 230 volts complete all as specified and as directed. Make:- Anchor/SSK/Legrand/Indoasian

Supply and Fixing Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body complete all as specified and as directed. Make : Anchor/SSK/Legrand/Indoasian

Supply and Fixing step type electronic fan regulator of capacity 100 watts 230 volts for ceiling / exhaust fan flush type all as specified and as directed. . Make :- Anchor/SSK/Legrand/Indoasian

Supply and Fixing Ding Dong Bell AC. 230 volts complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply & Fixing 6 Amps 1 way one module switch complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply & Fixing 6 Amps 2/3 pin socket two module complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply & Fixing 6 Amps 2 way module switch complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply & Fixing 16 Amps one way one module switch complete all as specified and as directed. Make:- Anchor/SSK/Legrand/Indoasian

Supply & Fixing modular multi socket outlet 6A/16 Amps 2/3 Pin socket 2 module complete all as specified and as directed. Make :- Anchor/SSK/Legrand/Indoasian

Supply & Fixing 6 Amps bell push one module switch complete all as specified and as directede. Make :- Anchor/SSK/Legrand/Indoasian

S&F PVC casing caping of size 20mm including cut to shape and size to match the existing conduits suitable for LT electric supply along with necessary fixing arrangements including disconnection and removing the unserviceable PVC casing caping complete.

All as per Item No 33 here in above but of size 25mm

S&F MCB DB, SPN, 2 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc., complete all as specified and as directed.

S&F MCB DB, SPN, 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc., complete all as specified and as directed.

S&F MCB DB, SPN, 12 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc., complete all as specified and as directed.

S&F MCB SP 6-32 Amps 230 volts 10 KA ISI marked complete all as specified and directed by Engg-in-Charge.

All as per Item No 38 here in above but of capacity MCB SPN 40 Amps

All as per Item No 38 here in above but of capacity MCB SPN 63 Amps

All as per Item No 38 here in above but of capacity MCB DP 63 Amps

S&F Single pole and neutral enclosure with a two pin earth plug and socket complete controlled by one single pole MCB 20 Amps 240 Volts, including taking out unserviceable MCB plug and socket unit complete all as specified and as directed. Note for Item No 35 to 42 : Make : IndoAsian/Siemens/ Scheneider/Legrand

S&F in repair batten for LED tube light 1X18/20 watts LED, 230Volt energy efficient, industrial batton type, powder coated, CRC Sheet complete with all as accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed. MAKE:Philips/Wipro/C&S/Crompton

S&F as in repair LED tube Rod 18/20 Watt complete all as specified and directed by Engg-In-Charge.Make : Philips/Wipro/C&S/Crompton

S&F as in repair batten for LED tube light 1X9 watts LED, 230Volt energy efficient, industrial batton type, powder coated, CRC Sheet complete with all as accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed. Make : Philips/Wipro/C&S/Crompton

S&F as in repair LED tube rod 9/10W complete all as specified and directed by Engg-In-Charge. Make : Philips/Wipro/C&S/Crompton

Supply and Fixing lamp holder,Batten/ angular type, PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitabel for general lighting system complete all as specified and as directed. Make : Anchor/Cona/Leader/Bajaj

S&F in repair LED lamp 9 watts complete all as spfd and directed. Make: Philips/Wipro /Crompton

All as per Item No 48 here in above but LED lamp 12 watts

S&f in repair LED inverter lamp 12 watt, 4 hrs backup time, cool white at mains supply and 450 lumens at backup 230 volt, 50 hz, all as specified and directed. Make : Crompton /Philips/Wipro

S&F as in repair batten Led 22 w inveter LED tube light complete fitting 230 volt energy saving, 04 hrs battery backup, CRI ≥80 more than, driver efficiency ≥ 85%, operating voltage 230 volt, 50hz operating temp (-10°C to 50°C) complete accessories internally pre wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by engineer-in-charge. Make: Philips/Wipro /Crompton

Supply & fixing energy efficient Intergral type 25W LED Street light luminaire comprising of epoxy powder coated hsg, enclosed with glass cover in frame mounted on MCPCB and testing compelte all as specified and directed Make:Philips/Wipro /Crompton

Supply & fixing GI bracket of size 32mm dia from the pole / building and M&L for street light bracket made out of 25 mm dia GI tubing medium grade upto 1.5 mtr long including bending, welding ,drilling holes as required and fixing with flat iron clamps 50x 6 mm thick (02 Nos) with suitable nut, bolts and washers to building complete all as specified and as directed.

M&L for earthing with GI earth plate electrode 60cm x 60cm x 6.0 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth wire of 4.0 mm dia by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover fitted with50mm thick with 6mm dia MS bars complete all as shown in SSR Pt - 1 electrical plate No 3. Note : Qoted rate deemed to include the cost or excavation and earth work PCC Chamber, funnel cover etc. complete all as specified and directed by Engg-In-Charge

S&F in repair sheet metal board made of 1.6mm thick metal sheet and painting 2 coats with synthic enamel paint over a coat of primer including copper bus bar and fixed with wall for fixing meter complete with wiring, fitting and accessories, locking arrangements with handle (minimum size of box 65cmx75cm and adequate depth for the following equipments, internal wiring and termination of external cable, lugs and glands and conduits as required complete all as specified and directed by Engg-In-Charge

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil and forming bottom surfaces of soil for laying of cable/pipe complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.

Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

S&F GI Tubes 15 mm bore, ‘medium grade’, ISI marked, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. Make : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

S&F GI Tubes 20 mm bore, ‘medium grade’, ISI marked, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. Make : JINDAL, TATA, BST, PRAKASH TUBES.

S&F GI Tubes 25 mm bore, ‘medium grade’, ISI marked, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. Make : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Fixing only tubes, any grade, to walls and ceilings or laying in floors 15 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Fixing only tubes, any grade, to walls and ceilings or laying in floors 20 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Fixing only tubes, any grade, to walls and ceilings or laying in floors 25 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Cutting existing 15 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (Each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Cutting existing 20 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Cutting existing 25 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of size 15mm dia, in repairs, complete all as specified. MAKE: LEADER, ZOLOTO, KIRLOSKAR

Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia, , complete all as specified. MAKE: LEADER, ZOLOTO, KIRLOSKAR

Gun-metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia, in repairs, complete all as specified. MAKE: LEADER, ZOLOTO, KIRLOSKAR

S&F in Repair 15mm Bib taps, Cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make:-Prayag/Jal/Jainko

Arresting of water leakage from existing pipe line in position from GI pipe of size 15mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified. Note :- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid saperately.

Arresting of water leakage from existing pipe line in position from GI pipe of size 20mm to 25mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified. Note :- (i) Excavation up to 1x1x6 Mtr will be deem to including in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid saperately.

LONGIA ENGINEERS

The Rahul Vig