Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹13.9 LAccepted-AOC R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹15.1 L+₹1.3 L (9.21%)Rejected-Finance H NO 89 BEHIND DD LEH UT LADAKH | LEH | LEH | LADAKH | 194101 | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹15.3 L+₹1.5 L (10.7%)Rejected-Finance | L-3 | Rejected-Finance Higher side quoted amount | |
| 4 | L-4₹15.4 L+₹1.6 L (11.4%)Rejected-Finance HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L-4 | Rejected-Finance Higher side quoted amount | |
| 5 | L-5₹16.1 L+₹2.2 L (16.2%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
12 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
DAY TO DAY PETTY B/R REPAIRS AND REPAIRS TO DOOR, SHUTTERS, WIRE MESH ETC IN VARIOUS TEMP AND PERMT BLDGS AT LAMAYURU, KHALTSI, HANUTHANG, ACHINATHANG, BATALIK AND BIAMAH UNDER AGE B/R-II KHALTSI UNDER GE KHUMBATHANG
2022_MES_526129_4
80051/32/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Khaltsi
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹30,000
26 Sept 2022
23 Aug 2022
13 Sept 2022
23 Aug 2022
12 Sept 2022
30 Aug 2022
Amount
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)complete all as specified and directed by Engr-in-Charge.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down and refixing door shutter in same opening with easing and adjusting in any description size of door exc 1 sqm each and n exc 2 sqm complete all as specified and directed by Engr-in-Charge.
S&F in repairs of plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd Class Hardwood (KAIL) complete all as specified and directed by Engr-in-Charge.
M&L for 35mm thick of 2nd class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers to chowkats for doors complete all as specified and directed by Engr-in-Charge.
M&L in repair for 35mm thick of 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges for receving glass etc sizws of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
M&L in repair for 30mm thick of 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
All as per Srl item no. 42.00 above but windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)complete all as specified and directed by Engr-in-Charge.
M&L for preparation of wood and wood based material surface of any descriptiony description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
S&F 100mm long, mild steel butt hinges, medium weight, cold rolled (including fixing with nails/ screw or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F 75mm long, mild steel butt hinges, medium weight, cold rolled (including fixing with nails/ screw or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F in repair for 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F in repair for 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 300mm, ordinary rat tail rod pattern springs including roller and roller plate (including fixing with nails/ screw or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium extruded section door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.
S&F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F in repair 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.
M&L in repair for plain fillets of second class soft wood (KAIL), sectional area n. exc. 6 Sqcm moulding as in cornices, picture rails and the like complete all as specified and directed by Engr-in-Charge.
M&L in repair for Plain fillets of second class soft wood (KAIL), sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in bull nosed, splayed, chamfered or rounded complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.
M&L in repair for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
All as per Srl item no. 38.00 above but except sheeting complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, plain mild steel sheeting in ridge, hips, valley gutters, drips andd straight flashings (length and girth as fixed)with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
M&L preparation of old painted steel surfaces and applying one coat of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
M&L preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.
Demolition of precast concrete block masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6) complete all as specified. and directed by Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surface on walls and applying two coats of cement based paint complete all as specified and directed by Engr-in-Charge.
M&L for three coats of white wash on wall including preparation of newly plastered wall surface complete all as specified and directed by Engr-in-Charge.
M&L for two coats of oil bound distemper on wall including preparation of newly plastered wall surface complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L 25mm thick cement concrete 1:2:4 type B-2(12.5 mm graded aggregate) as in floor or similar works complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 and n.exc 0.11 Sqm in floors etc over 15mm screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
S & F in repair vitreous china water closet squatting pan ‘Orrissa pattern” size 580x440mm white with integral foot rests including provision of of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface jointing to PVC/CI bend and flush pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repair vitreous china wash down pedestal pattern EWC, white water closet pan with integral trap including seat cover, making necessary connections to drain and to flushing pipe antisyphonage pipe etc. jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed by Engr-in-Charge.
Supply and fix in repairs vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous China urinal partition white of Size 310 x 770 mm incl finishing the joints with white cement & fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipecomplete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china urinals bowl ,flat back of size 465 x 355 x 265 mm with grating and union for discharge pipe, complete including providing and fixing plugs , bedding urinal against wall in cement mortar 1:2 , securing urinal to pluigs with and including 60 mm long brass screw , pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge
S&F in repair sinks with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe , overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mmcomplete all as specified and directed by Engr-in-Charge.
S&F in repair sinks made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed by Engr-in-Charge.
S&F in repair plastic water closet seat cover, black, closed pattern with flat bottom, and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repair for 25 mm dia mild steel (PVC coated decorative fancy type) curtain rod including brackets to hold rod in position ABS finials of approval quality etc, complete all as specified and directed by Engr-in-Charge
S&F in repair PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket, and connections to pipes and fixing of chain and pull, or lever, if anycomplete all as specified and directed by Engr-in-Charge.
S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
S&F in repair Towel rail 600 mm long D type brass chromium plated with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engr-in-Charge.
S&F in repair CP toilet paper holder of standard size complete all as specified and directed by Engr-in-charge.
S&F in replacement of 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) with plastic lid cover, triple layer, hoisted and fixed in position as specified in SSR Part-I including dismantalling of old tank complete all as specified and directed by Engr-in-charge.
All as per item No 70.00 here-in-before but capacity of 1000 ltrs complete all as specified and directed by Engr-in-charge
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm pipe complete all as specified and directed by Engr-in-Charge
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 20 mm pipe complete all as specified and directed by Engr-in-Charge
S&F in repair for 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 15 mm bore complete all as specified and as directed by Engr-in-Charge.
All as per item No 77.00 here-in-before but 20 mm complete all as specified and directed by Engr-in-charge
S&F in repairs for 15 mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs for 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm -125 gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair 20 mm bore stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm -90 gms/20 mm - 92 gms complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore angle valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm -90 gms) complete all as specified and directed by Engr-in-charge.
S&F in repair PVC waste pipe 32mm dia for WHB, Urinal etc complete all as specified and directed by Engr-in-charge.
S&F in repair 32 mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed by Engr-in-charge
S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete complete all as specified and directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge
Demolition of PVC pipes of 100/75 mm dia bore in any position including bends etc complete all as specified and directed by Engr-in-Charge.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-Charge
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge.
S&F 75 mm PVC bends diminishing pieces or tapers complete all as specified and as directed by Engr-in-Charge.
S&F 75 mm bore PVC cowls complete all as specified and directed by Engr-in-charge
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed by Engr-in-Charge.
S&F 75 mm PVC bends complete all as specified and as directed by Engr-in-Charge.
Taking down carefully point wiring and fitting, switch boards etc of any description and refixing the same after panelling at same location, complete all as specified and as directed by Engr-in-Charge.
Credit Note:- The accepted amount will arrived after deducting the sch of credit i.e. 36,241.00 as tender page number 40.
M/S HIGHLAND ENGINEERING
NAMGAIL DORJAY
national engineering
KASHMIR FAIR DEAL SERVICES
M/S ALI MOHD AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .