Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 3 4 ANURAG BUSINESS CENTER NEAR AMAR CINEMA CHEMBUR MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | Admitted-Finance |
Tender Value
₹43.9 L
EMD Value
₹87,739
Closing Date
16 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer, CD-I, APWD, Rangat
Repair and Maintenance of HDPE Floating Jetty at Lalaji Bay, Long Island in Middle Andaman under SD-II, CD-I, APWD, Rangat.
2023_APWD_9483_1
65/DB/CD-I/RGT/2022-23
Open Tender
Civil Works - Others
Item Rate
120 days
Long Island
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹87,739
17 Mar 2023
22 Feb 2023
17 Mar 2023
22 Feb 2023
16 Mar 2023
22 Feb 2023
Amount
Providing RCC 1:1.5:3 precast anchors blocks/anchors of size 0.50 x 0.50 x 0.25M cast with (1 cement, 1.5 Pulverised Stone Sand & 3 Stone Chips 20mm nominal size) including cost of cement (OPC Gr-43 IS 8112:1989), pulverised stone sand and stone chips from the approved quarry , screening and washing of both the aggregates, mixing of concrete, conveying and placing the same, consolidation and curing, cost of steel reinforcement (10mm dia @ 150mm c/c top,middle & bottom), cost of centering and shuttering, cost of all other materials, removal of form work, lifting and stacking the anchor blocks, cost of all labour charges, cost of minor tools etc., complete.
Fixing and assembling of universal modular HDPE cubical units of size 0.50m x 0.50m x 0.40m and weight not less than 7.00Kg to 8.00Kg/Unit (+,- 5%) with load carrying capacity of 360 Kg/Sqm at back side of Lalaji bay, Long Island in Middle Andaman, excluding cost of HDPE cubical units, accessories like connecting pins etc., which will be paid separately but including hire charges of minor tools etc., complete.
Placing of RCC anchors in sea at the specified locations at Lalaji Bay,Long Island in Middle Andaman (not more than - 2.00 meter depth) as specified by the Engineer-in-charge, excluding cost of anchor accessories, G.I Chain, D shackle, G.I Bolts with nuts and washers etc which will be paid separately, but including hire charges of minor tools etc., complete.
Launching and fixing in position of HDPE floating jetty at back side of Lalaji bay, Long Island in Middle Andaman as per the directions of Engineer-in-charge and securing the same with anchor blocks, excluding cost of anchoring accessories which will be paid separately but including hire charges of minor tools etc., complete.
Providing manpower for fixing of HDPE floating cubical units, hand rails, fenders and other acessories as per direction of Engineer In Charge.
Divers (Highly skilled)
Skilled labour
Semi-skilled labour
Cost of transportation to Port Blair & to the respective location at Lalaji Bay, Long Island, handling & storage charges etc.
Supply of Materials:- Modular HDPE floating cubical units of make - Magic float or equivalent for constructing floating jetty at work site at back side of Lalaji bay, Long Island in Middle Andaman. The HDPE floater should be made from Virgin High Density Polyethylene and each cube size should be 50cm x 50cm x 40cm and weight should be 7.00 Kg to 8.00 Kg / Unit (+,- 5%) with load carrying capacity of not less than 360Kg/Sqm. The walls of the cube should be universal that is similar cubes of other manufactures should easily fit. Each module should have an anti-skid top surface as an integral part of the module thus making the surface the best anti-skid surface available worldwide. There should be ducts in the walls of the float. These ducts can be used for passing cabling if required. Rate shall be inclusive of cost of Modular HDPE floating cubicals, short connecting pins, side fixation unit with nuts, distance discs, hire charges of minor tools, incidental charges, one year warranty for manufacturing defect with maintenance at their own cost etc complete. (Note: Test certificates should be submitted for material properties shall be acceptable which are provided report by CIPET India or any reputed research centre’s which are acceptable internationally along with the cubical units.)
Supply of following accessories for assembling/fixing of cubical units as per the direction of Engineer-in-charge for the floating jetty at back side of Lalaji bay,Long Island in Middle Andaman, including cost of all accessories, hire charges of minor tools etc., complete:-
Stainless steel hand rails made with 1.5 mm thick SS pipe 40mm dia, base plate 25mm dia, 3mm thickness with stiffener, 3" length full threaded with nut, SS plate washer 3mm thickness and 9cm dia.(1. Size- width 130cm, height-120cm including bolt, 2. Stainless steel welding to be carried out, 3. Staineless steel should be of 304 grade) weight not less than 13.580kg with washer, including hire charges of minor tools etc. complete.
Anchor Chain (GI) of 16mm dia (Hot Dip galvanised link chain as per IS 2429: Part-I: 1970 weight 5.30 Kg/m: Dia of link: 16mm, Proof load: 6.35 MT,, S.W.L. : 3.20 MT, Tolerance : +,-5%)
PP Rope 20 mm dia
“D” Shackle of 20mm dia (Hot Dip galvanised “D” Shackle body dia 20mm (ISI approved brand) capacity 4 Ton as per IS 61392 with test certificate)
PE FENDER, (Material should be made from Virgin High Density Polyethylene, weight not less than 2.65 Kg used for fending the impact of the boat on the jetty and protecting floating structure from hit directly by rowboat, pedal boat.)
TORQUE WRENCH, (Material should be made from Virgin High Density Polyethylene, weight not less than 2.00 Kg, necessary tools used for assembling & disassembling the connecting pins with cubes.)
BOAT CLEAT WITH NUT, (Material should be Stainless Steel Grade-316 or Equivalent, weight not less than 1.00 Kg used for mooring the vessel less than length of 28 feet.)
DISTANCE DISC, (Material should be made from Virgin High Density Polyethylene, weight not less than 0.07 Kg used for placing between the span (vacant spaces) of lugs.)
SCREW JOINT HAFT, (Material should be made from U.P.E., weight not less than 0.10 Kg used for loosening or tightening up the side fixation with nut.)
SS BELAYING PIN, SINGLE TYPE, (SS Gr-316 Marine Grade Single type for mooring vessels less than 65 feet length or 35 Tonnage.)
Stainless Steel Bolts with nuts (16mm dia, bolt length 200mm) and Washers (outer dia 60mm,inner dia 20mm and thickness 5mm)
SIDE FIXATION UNIT WITH NUT, (Material should be made from Virgin High Density Polyethylene, weight not less than 0.19 Kg to fix the cubes at the edges.)
SHORT CONNECTING PIN, (Material should be made from Virgin High Density Polyethylene, weight not less than 0.75 Kg to hold the one Sqm of floating cubes through the lugs.)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .