PROVN OF CHAIN LINK FENCEING FOR SECURITY WALL AROUND BUILDING NO P-58 AT HQ 80 INF BDE UNDER AGE B/R DETT A NAUSHERA UNDER GE 862 EWS

Amount

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed.

PCC 1:2:4 (nominal mix), type B-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor and post, complete all as specified & directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., complete all as specified & directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified & directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Use & waste of form work to sides of concrete foundation, footings, bases of columns, rafts and raft beamsand similar work; vertical or to batter for fair finished surfaces of concrete, complete all as specified & directed.

Use & waste of form work to sides of pillars, posts, structs, columns etc. for fair finished surfaces of concrete, complete all as specified & directed.

Mild steel round bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

TMT bars 05 mm dia and over upto and including 10 mm dia in stirrups , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc., wind ties for roof including securing bolts , posts and struts in fencing including cutting tops to shape as directed, driling holes, notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-290 Gde E-165, complete all as specified.

Supply only Chain link fencing 2 to 4 mm dia made of mild steel GI mesh of any size or type including staining bolts complete all as specified and as directed by Engineer-in-Charege.

Fixing only chain link fencing including line wires, any mesh size and type straining bolts, including provision of binding wire complete all as specified.

Supply only mild steel work in ms flat for securing chain link fencing with posts / struts and fixed with nuts / bolts and similar items conforming to Fe-410 ( Gde-250) quality -'A' complete all as specified.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 grade-E-250, complete all as specified.

Mild steel bolts ( machine made), purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long, diameter of neck 05 mm to 10 mm , complete all as specified.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement , complete all as specified.

Preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.

M/S BHAGWATI ENTERPRISES (BID ID -3269829)

M/S Darshan Kumar (BID ID -3273570)