Periodical services camouflage painting and certain repairs to buildings at AF Stn Nathatop under GE (AF) Udhampur

Amount

Preparing old plastered or un-plastered surfaces of walls including cornices brooming down with wire brushes including removal of shrubs vegetation, grass and applying one coat of white lime wash complete all as specified and as directed. Note: Unit rate quoted shall include removing of nails, making good holes, cracks etc, work in patches and in narrow widths, spreading and removing covering to doors, windows, floor fittings etc to protect them from splashes, removing and replacing furniture movable cup boards etc and washing floors, cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and dry.

All as per serial item 1 here-in-before but on ceiling.

All as per serial item 1 but three coat of white wash including prepration of newly plastered surfaces.

Preparation of old painted steel and iron surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Note: Unit rate quoted shall include taking down cleaning as directed and refixing blinds and fittings, picture, rods, cornice poles and small items of builder's hardware such as door knobs, finger plates, hooks etc., use of dust sheets and other covering for the protection of fixture, fittings, furniture etc shifting of movable cupboards and furniture as required and replacing in position, work in patches including matching with existing work and removing all splash drops, dirts etc and leaving premises ina clean state.

Preparation of old painted wood and wood based surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Note : Unit rate quoted shall include taking down, cleaning as directed and re-fixing blinds and fittings, picture, rods, cornice poles and small items of builder's hardware such as door knobs, finger plates, hooks etc, use of dust sheets and other covering for the protection of fixture, fittings, furniture etc shifting of movable cupboards and furniture as required and replacing in position, work in patches including matching with existing work and removing all splash drops, dirt etc and leaving premises in a clean state.

M&L One coats of exterior acrylic paint of any shade in camouflage pattern as approved by GE on old plastered surfaces of walls including preparation of old surfaces as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge, Make : Apex of Asian/Excel of Nerolac/Weather shield of ICI Dulux

Taking down cement or cement lime plaster, any description on brick or stone walls etc, including raking out joints, racking for key, scrubbing down with water etc complete all as specified and as directed including removing rubbish to out side the MOD land all as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry or surfaces other than fair faces of brick, finshed even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick masonry , finshed even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of wall including preparation of new surfaces as per manufacturer’s instructions complete all as specified and as directed. Make : Apex of Asian/Excel of Nerolac/Weather shield of ICI Dulux.

M&L for Racking out joints and pointing to random rubble or polygonal rubble un-coursed or brought up to courses in CM 1:3 complete all as specified and as directed.

M&L for flush pointing to random rubble masonry uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

Preparation of old surfaces of walls and applying one coat of oil bound distemper on old surfaces including prepration of old treatment on walls complete all as specified and as directed.

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm height all as specified with thick synthetic enamel paint over a coat of synthetic enamel paint over a cot of sysnthetic enamel paint as base of writing letters all as specified.

M&L for Varnishing of wood surfaces of any description, over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

Preparation of old painting steel surfaces of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint in camouflage pattern as approved on roof complete all as specified and as directed.

Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road marking paint white as in helipad all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or described) from aluminium frame, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality in as in aluminum door and windows complete all as specified.

S&F 5mm thick tinted sheet glass ( one side mirror finish) in aluminium frame including necessary rubber gasket and aluminiumm snap beading complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 3 mm thick pin head type glass ordinary quality and glazing with oil putty/wooden beading in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling plain or Corrugated steel sheeting, any gauge, thickness complete all as specified

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screw or L type or J type hook all as specified and directed.

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw or L type or J type hook all as specified and directed .

S & F 0.63mm thick Galvanised corrugated mild steel sheeting with rectangular corrugation side lap, fixed with L-type or J type or cranked hook bolts and washers in roofs, walls etc class 8 complete all as specified and as directed.

Galvanised, corrugated mild steel sheeting 0.63 mm thick (Except sheet), any description with two corrugation side lap, fixed with L/J type hooks/bolts and washers, in roofs, walls etc complete all as specified.

S & F 0.80 mm thick plain galvanized PGI sheets in ridges, hips ,vally gutters, etc class 8. complete all as specified and as directed. SAIL/TATA/ISPNL

Dismantling structural steel work including door,gates of any description except framed trusses, complete all as specified.

S & F Wind ties for roof including securing bolts posts and struts fencing including cutting taps to shape as directed driling holes flat iron fillets including all necessary drilling bolting or riveting etc conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Fixing only Wind ties for roof including securing bolts posts and struts fencing including cutting taps to shape as directed driling holes flat iron fillets including all necessary drilling bolting or riveting etc conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., as door frames, and hanging; also fastening and fixing confirming to grade Fe-290-Gde E-165, complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.

Taking down chowkats or frames (without taking off shutters from the frame) exe 1.50 sqm but n exe 4 sqm each and removing from site all as specified.

Description all as per item No. 34 above but n exe 1.5 sqm each.

Taking down shutters from the frame of any description exe 1sqm but n exc 2 sqm each leaf and removing from site all as specified.

Taking down shutters from the frame of any description exe 1sqm but n exc 1 sqm each leaf and removing from site all as specified.

Re-securing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongry for shutter exc 1sqm but n exc 2 sqm each leaf.

M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, compete all as directed all as directed.

S&F 2nd class hardwood plain framed panelled factory made shutters 35mm thick (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board med density/wood particle board with commercial face veneers fixed to chowkats compete all as directed all as directed.

S&F 2nd class hardwood glazed and skelton shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers compete all as directed all as directed.

S&F Butt hinges, medium weight cold rolled 75mm size ISI marked compete all as directed all as directed.

S&F aluminium anodised barrel tower bolts, extruded section of 100mm long compete all as directed all as directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size compete all as directed all as directed.

S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked compete all as directed all as directed.

S&F aluminium anoldised barrel tower bolts, extruded section of 150 mm long compete all as directed all as directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified compete all as directed all as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer, including necessary preparatioon of new wooden surfaces of any description over 10cm width or girth compete all as directed all as directed.

Taking down aluminium door of any description, taking-out double action floor spring machine, hydraucally regulated, cleaning, oiling, easing and adjusting to make fully functional and refixed in the position including refixing shutter all as specifiied

S&F in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing

S&F in repairs, door closer aluminium body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters and fixed all as specified

S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed all as specified.

S&F in repair mortice lock verticle type 100 mm 4 lever brass fixed in aluminum door complete

S&F in repair aluminium snap bead (Glazing clip) for securing glass etc with rubber in aluminium frame work

S&F in repair aluminium frame work for door window ventilator and partition wall with 1 or more rebates fixing with snap beading or any other section, rubber packing, cleats for fixing glass/board all as specified.

S & F in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F in repair Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

S & F in repair Anodised aluminium sliding window and ventilator shutters,aluminium sections weighing 0.55 kg/m including necessary joining rolling cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting complete all as specified

Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5 mm thick sheet moulded teak face colour sheet reinforced with 19mm x 19mm square tube having wall thickness 19 gauge complete all as shown in sketch on page 160 of SSR 2010 (Part-II).The door frame to be fixed to the wall using MS screw 75 mm long with PVC fastener complete as per manufacturer's instructions and all as specified.

S&F in repair anodised aluminium frame for partitions wall, with one or more rebates, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, beading, screws, complete with all fittings including fixing base of partition with floor complete all as specified.

S&F of factory made PVC moulded prelaminated door shutter with particle board core 28-30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on the back face, including PVC fixture & fitting, complete all as specified and directed by Engineer-in-Charge.

M & L APP based polymeric water proofing membrane , five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed. Note : The rate quoted shall be deemed to include for dismantling and refixing in position of wind tie and lightening protection after carrying out the treatment.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20Kg per Sqm including cleaning surfaces, complete all as specified.

S & F in reapirs wall mixture with hand shower provision brass chromium plated suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Cat Part No 23267 of Jaquar or equivalent approved model of Hindware/Marc

S & F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with capstan head for high pressure suitable for 15mm bore pipe complete and all as specified. Cat Part No 167 of Jaquar, or equivalent approved model of Hindware/Marc

S & F in reapirs brass glossy finish hand shower with 1.5 mtr lexible tube and hook fixed with wall mixture complete all as specified and as directed Cat Part No 1937 & 549D of Jaquar, or equivalent approved model of Hindware/Marc

S & F in repairs bib taps suitable for 15mm bore pipe long neck fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair and all as specified. Cat Part No 23037 of Jaquar, Cat Part No 8608 of Prayag.

Supply and fixing in repairs health faucet with 1.0 mtr tube and hook complete all as and directed Cat Part No- 573 of Jaquar or equivalent approved model of Hindware/Marc

RANBIR ENTERPRISES

M/S ASHOK KUMAR PACHIALA